Belimo
Belimo LF230 (Domestic Biomass Boiler Fail-Safe Actuator)
This Belimo LF230 safety actuator is used on the following biomass boiler models: WES E-Compact 28 Trianco Greenflame 25 Bioflame 28 For commercial boilers (55kW+) please see the LF230-S - ecospares.co.uk/products/commercial-belimo-valve Part no. 400715 Click here for the technical data PDF The Belimo LF230 Rotary Actuator is designed to precisely control air dampers in HVAC systems, ensuring optimal performance and reliability. With its fail-safe mechanism, this actuator provides dependable operation in critical applications. Suitable for air dampers up to 0.8 m², the LF230 is built for efficiency, durability, and ease of installation. Nominal Voltage: AC 100...240 V Nominal Voltage Frequency: 50/60 Hz Nominal Voltage Range: AC 85...265 V Power Consumption in Operation: 3.5 W Power Consumption in Rest Position: 2 W Power Consumption for Wire Sizing: 6.5 VA Connection Supply / Control: Cable 1 m, 2x 0.75 mm² Parallel Operation: Yes (note the performance data) Functional Data Torque Motor: 4 Nm Torque Fail-Safe: 4 Nm Direction of Motion Motor: Selectable by mounting L/R Direction of Motion Fail-Safe: Selectable by mounting L/R Manual Override: No Angle of Rotation: Max. 95° Adjustable Angle of Rotation: 37...100% with integrated mechanical limitation Running Time Motor: 75 s / 90° Running Time Fail-Safe: <20 s @ -20...50°C / <60 s @ -30°C Sound Power Level, Motor: 50 dB(A) Mechanical Interface: Universal shaft clamp 8...16 mm Position Indication: Mechanical Service Life: Min. 60,000 fail-safe positions Safety Data Protection Class IEC/EN: II, reinforced insulation Degree of Protection IEC/EN: IP54 EMC: CE according to 2014/30/EU Low Voltage Directive: CE according to 2014/35/EU Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 Hygiene Test: According to VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low emission Type of Action: Type 1.B Rated Impulse Voltage Supply / Control: 4 kV Pollution Degree: 3 Ambient Humidity: Max. 95% RH, non-condensing Ambient Temperature: -30...50°C [-22...122°F] Storage Temperature: -40...80°C [-40...176°F] Servicing: Maintenance-free Weight: 1.6 kg Operating Mode: The actuator moves the damper to the operating position while tensioning the return spring. When the supply voltage is interrupted, the damper returns to the safety position using spring energy. Simple Direct Mounting: Easy mounting on the damper shaft with a universal shaft clamp and anti-rotation device. Adjustable Angle of Rotation: Mechanically adjustable with end stops. High Functional Reliability: Overload protection, no limit switches required, and automatic stop at the end stop. We offer all Belimo products. For more information and to explore our range, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626.
£220.00
-
Belimo TF230 damper actuator
The Belimo TF230 is a high-performance rotary actuator designed for fail-safe adjustment of air dampers in technical building installations. Engineered for reliability and efficiency, this actuator is ideal for HVAC applications, providing precise control and enhanced safety features. Click here for the technical data PDF Electrical Data: - Nominal Voltage: AC 100...240 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 85...265 V - Power Consumption in Operation: 2.5 W - Power Consumption in Rest Position: 1.5 W - Power Consumption for Wire Sizing: 5 VA - Connection Supply/Control: Cable 1 m, 2x 0.75 mm² - Parallel Operation: Yes (note the performance data) Functional Data: - Torque Motor: 2.5 Nm - Torque Fail-Safe: 2.5 Nm - Direction of Motion Motor: Selectable by mounting L/R - Direction of Motion Fail-Safe: Selectable by mounting L/R - Manual Override: No - Angle of Rotation: Max. 95° - Angle of Rotation Note: Adjustable starting at 37% in 2.5% steps (with mechanical end stop) - Running Time Motor: 75 s / 90° - Running Time Fail-Safe: <25 s / 90° - Sound Power Level, Motor: 50 dB(A) - Mechanical Interface: Universal shaft clamp 6...12.7 mm - Position Indication: Mechanical - Service Life: Min. 60,000 fail-safe positions Safety Data: - Protection Class IEC/EN: II, reinforced insulation - Degree of Protection IEC/EN: IP42 - EMC: CE according to 2014/30/EU - Low Voltage Directive: CE according to 2014/35/EU - Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 - Hygiene Test: According to VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low emission - Type of Action: Type 1.AA - Overvoltage Category: III - Rated Impulse Voltage Supply/Control: 4 kV - Pollution Degree: 3 - Ambient Humidity Max.: 95% RH, non-condensing - Ambient Temperature: -30...50°C [-22...122°F] - Storage Temperature: -40...80°C [-40...176°F] - Servicing: Maintenance-free - Weight: 0.62 kg Fail-Safe Operation: The actuator moves the damper to the operating position while tensioning the return spring. In case of supply voltage interruption, the damper returns to the safety position via spring energy. Simple Direct Mounting: Universal shaft clamp with anti-rotation device ensures easy installation and secure operation. Adjustable Angle of Rotation: Mechanical end stops allow for precise adjustment. Overload Protection: The actuator is protected against overload and requires no limit switches, stopping automatically at the end stop. Accessories: - Actuator Arm: AH-TF - Shaft Extension: 170 mm ø10 mm for damper shaft ø6...16 mm AV6-20 - Ball Joint: Suitable for damper crank arm KH8 / KH10 KG10A, KG8 - Damper Crank Arm: Slot width 8.2 mm, clamping range ø10...18 mm KH8 - Screw Fastening Kit: SB-TF - Angle of Rotation Limiter: With end stop ZDB-TF - Form Fit Adapter: 8x8 mm ZF8-TF - Mounting Kit: For linkage operation for flat and side installation ZG-TF1 - Anti-Rotation Mechanism: 180 mm, Multipack 20 pcs. Z-ARS180 Additional Notes: - Wire Colours: 1 = blue, 2 = brown - Caution: Ensure power supply voltage is correct. Only authorised specialists should carry out installation. Follow all applicable regulations. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£179.00£125.30
-
Belimo NFA-S2 Damper Actuator
Introducing the Belimo NFA-S2 Rotary Actuator, designed for fail-safe adjustment of dampers in technical building installations. Ideal for air damper sizes up to approximately 2 m², this actuator ensures reliable performance with a robust torque motor of 10 Nm. Whether for industrial applications or engineering projects, the NFA-S2 combines efficiency and durability, making it a top choice for tradesmen and engineering companies. Click here for the technical data PDF Electrical Data: Nominal Voltage: AC 24...240 V / DC 24...125 V Nominal Voltage Frequency: 50/60 Hz Nominal Voltage Range: AC 19.2...264 V / DC 21.6...137.5 V Power Consumption in Operation: 6 W Power Consumption in Rest Position: 2.5 W Power Consumption for Wire Sizing: 9.5 VA Auxiliary Switch: 2x SPDT, 1x 10% / 1x 11...100% Switching Capacity Auxiliary Switch: 1 mA...3 A (0.5 A inductive), DC 5 V...AC 250 V Connection Supply / Control: Cable 1 m, 2x 0.75 mm² Connection Auxiliary Switch: Cable 1 m, 6x 0.75 mm² Parallel Operation: Yes (note the performance data) Functional Data: Torque Motor: 10 Nm Torque Fail-Safe: 10 Nm Direction of Motion Motor: Selectable by mounting L/R Direction of Motion Fail-Safe: Selectable by mounting L/R Manual Override: By means of hand crank and locking switch Angle of Rotation: Max. 95° Angle of Rotation Note: Adjustable starting at 33% in 2.5% steps (with mechanical end stop) Running Time Motor: 75 s / 90° Running Time Fail-Safe: <20 s @ -20...50°C / <60 s @ -30°C Sound Power Level, Motor: 45 dB(A) Mechanical Interface: Universal shaft clamp 10...25.4 mm Position Indication: Mechanical Service Life: Min. 60,000 fail-safe positions Safety Data: Protection Class IEC/EN: II, reinforced insulation Protection Class UL: II, reinforced insulation Protection Class Auxiliary Switch IEC/EN: II, reinforced insulation Degree of Protection IEC/EN: IP54 Degree of Protection NEMA/UL: NEMA 2 Enclosure UL: Enclosure Type 2 EMC: CE according to 2014/30/EU Low Voltage Directive: CE according to 2014/35/EU Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 Additional Safety Data: UL Approval: cULus according to UL60730-1A, UL60730-2-14 and CAN/CSA E60730-1 Hygiene Test: According to VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low-emission Type of Action: Type 1.AA.B Rated Impulse Voltage Supply / Control: 4 kV Rated Impulse Voltage Auxiliary Switch: 2.5 kV Pollution Degree: 3 Ambient Humidity Max.: 95% RH, non-condensing Ambient Temperature: -30...50°C [-22...122°F] Storage Temperature: -40...80°C [-40...176°F] Servicing: Maintenance-free Weight: 2.2 kg Electrical Accessories: Auxiliary switch 2x SPDT S2A-F Feedback potentiometer 1 kΩ P1000A-F Mechanical Accessories: Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm AV8-25 End stop indicator IND-AFB Shaft clamp reversible, for central mounting, for damper shafts ø12.7 / 19.0 / 25.4 mm K7-2 Ball joint suitable for damper crank arm KH8 / KH10 KG10A Ball joint suitable for damper crank arm KH8 KG8 Damper crank arm Slot width 8.2 mm, clamping range ø10...18 mm KH8 Actuator arm, for 3/4" shafts, clamping range ø10...22 mm, Slot width 8.2 mm KH-AFB Form fit insert 10x10 mm, Multipack 20 pcs. ZF10-NSA-F Form fit insert 12x12 mm, Multipack 20 pcs. ZF12-NSA-F Form fit insert 15x15 mm, Multipack 20 pcs. ZF15-NSA-F Form fit insert 16x16 mm, Multipack 20 pcs. ZF16-NSA-F Mounting kit for linkage operation for flat and side installation ZG-AFB Baseplate extension Z-SF Anti-rotation mechanism 230 mm, Multipack 20 pcs. Z-ARS230L Hand crank 63 mm ZKN2-B Why Choose the Belimo NFA-S2 Rotary Actuator? Versatile Operation: This actuator is compatible with a wide range of voltages and is suitable for various industrial applications. Reliable Performance: Designed for long-lasting durability with a minimum service life of 60,000 fail-safe positions. Enhanced Safety: Complies with multiple international standards, ensuring safe and efficient operation. User-Friendly: Features like manual override and adjustable angle of rotation make it easy to use and install. Maintenance-Free: Requires no regular maintenance, offering hassle-free operation. Discover More: Explore our comprehensive range of Belimo products at https://ecospares.co.uk/collections/belimo. For assistance, contact us at 01772 284 626. Our expert team is ready to help you find the perfect solution for your engineering needs.
£349.00£244.30
-
Belimo SM24A damper actuator
The Belimo SM24A Damper Actuator is a robust and reliable actuator designed for adjusting dampers in technical building installations. Ideal for air dampers up to approximately 4 m², this actuator offers precise control, efficient performance, and long-lasting durability. Perfect for HVAC systems, it ensures optimal airflow management in commercial and industrial environments. Click here for the technical data PDF Electrical Data Nominal Voltage: AC/DC 24 V Nominal Voltage Frequency: 50/60 Hz Nominal Voltage Range: AC 19.2...28.8 V / DC 19.2...28.8 V Power Consumption in Operation: 2 W Power Consumption in Rest Position: 0.2 W Power Consumption for Wire Sizing: 4 VA Connection Supply / Control: Cable 1 m, 3x 0.75 mm² Parallel Operation: Yes (note the performance data) Functional Data Torque Motor: 20 Nm Direction of Motion Motor: Selectable with switch 0 (ccw rotation) / 1 (cw rotation) Manual Override: With push-button, can be locked Angle of Rotation: Max. 95° Angle of Rotation Note: Can be limited on both sides with adjustable mechanical end stops Running Time Motor: 150 s / 90° Sound Power Level: 45 dB(A) Mechanical Interface: Universal shaft clamp reversible 10...20 mm Position Indication: Mechanical, pluggable Safety Data Protection Class IEC/EN: III, Safety Extra-Low Voltage (SELV) Power Source UL: Class 2 Supply Degree of Protection IEC/EN: IP54 Degree of Protection NEMA/UL: NEMA 2 Enclosure UL: Enclosure Type 2 EMC: CE according to 2014/30/EU Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 UL Approval: cULus according to UL60730-1A, UL60730-2-14 Hygiene Test: According to VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low-emission Type of Action: Type 1 Rated Impulse Voltage Supply / Control: 0.8 kV Pollution Degree: 3 Environmental Conditions Ambient Humidity: Max. 95% RH, non-condensing Ambient Temperature: -30...50°C [-22...122°F] Storage Temperature: -40...80°C [-40...176°F] Servicing: Maintenance-free Weight: 0.94 kg Simple Direct Mounting: Direct mounting on the damper shaft with a universal shaft clamp, supplied with an anti-rotation device to prevent the actuator from rotating. Manual Override: Manual override with push-button possible (the gear train is disengaged for as long as the button is pressed or remains locked). Adjustable Angle of Rotation: Adjustable angle of rotation with mechanical end stops. High Functional Reliability: The actuator is overload protected, requires no limit switches, and automatically stops when the end stop is reached. Electrical Accessories: Auxiliary switch 1x SPDT add-on S1A Auxiliary switch 2x SPDT add-on S2A Feedback potentiometer 140 Ω add-on P140A Feedback potentiometer 1 kΩ add-on P1000A Feedback potentiometer 10 kΩ add-on P10000A Mechanical Accessories: Actuator arm for standard shaft clamp (reversible) AH-20 Shaft extension 240 mm ø20 mm for damper shaft ø12...21 mm CrNi AV12-25-I Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm AV8-25 Ball joint suitable for damper crank arm KH8 KG8 Ball joint suitable for damper crank arm KH8 / KH10 KG10A Damper crank arm Slot width 8.2 mm, clamping range ø10...18 mm KH8 Shaft clamp one-sided, clamping range ø8...26 mm, Multipack 20 pcs. K-ENSA Shaft clamp one-sided, clamping range ø12...26 mm, for CrNi shaft (INOX), Multipack 20 pcs. K-ENSA-I Shaft clamp reversible, clamping range ø10...20 mm K-SA Anti-rotation mechanism 180 mm, Multipack 20 pcs. Z-ARS180 Anti-rotation mechanism 230 mm, Multipack 20 pcs. Z-ARS230 Form fit insert 10x10 mm, Multipack 20 pcs. ZF10-NSA Form fit insert 12x12 mm, Multipack 20 pcs. ZF12-NSA Form fit insert 15x15 mm, Multipack 20 pcs. ZF15-NSA Form fit insert 16x16 mm, Multipack 20 pcs. ZF16-NSA Mounting kit for linkage operation for flat installation ZG-SMA Position indicator, Multipack 20 pcs. Z-PI Baseplate extension for SM..A to SM../AM../SMD24R Z-SMA For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please contact us.
£183.00£128.10
-
Belimo LF24-SR Damper Actuator
The LF24-SR Rotary Actuator by Belimo is a fail-safe actuator designed for adjusting dampers in technical building installations. This robust and reliable actuator is ideal for air damper sizes up to approximately 0.8 m². With a modulating control range of 2...10 V and position feedback capabilities, it ensures precise and efficient damper control, enhancing the overall performance of HVAC systems. Click here for the technical data PDF Electrical Data: - Nominal Voltage: AC/DC 24 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 19.2...28.8 V / DC 21.6...28.8 V - Power Consumption in Operation: 2.5 W - Power Consumption in Rest Position: 1 W - Power Consumption for Wire Sizing: 5 VA - Connection Supply / Control: Cable 1 m, 4x 0.75 mm² - Parallel Operation: Yes (note the performance data) Functional Data: - Torque Motor: 4 Nm - Torque Fail-Safe: 4 Nm - Operating Range Y: 2...10 V - Input Impedance: 100 kΩ - Position Feedback U: 2...10 V - Position Feedback U Note: Max. 0.7 mA - Position Accuracy: ±5% - Direction of Motion Motor: Selectable with switch L/R - Direction of Motion Fail-Safe: Selectable by mounting L/R - Manual Override: No - Angle of Rotation: Max. 95° - Angle of Rotation Note: Adjustable 37...100% with integrated mechanical limitation - Running Time Motor: 150 s / 90° - Running Time Fail-Safe: <20 s @ -20...50°C / <60 s @ -30°C - Sound Power Level, Motor: 30 dB(A) - Mechanical Interface: Universal shaft clamp 8...16 mm - Position Indication: Mechanical - Service Life: Min. 60,000 fail-safe positions Safety Data: - Protection Class IEC/EN: III, Safety Extra-Low Voltage (SELV) - Degree of Protection IEC/EN: IP54 - EMC: CE according to 2014/30/EU - Low Voltage Directive: CE according to 2014/35/EU - Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 - Hygiene Test: According to VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low emission - Type of Action: Type 1 - Rated Impulse Voltage Supply / Control: 0.8 kV - Pollution Degree: 3 - Ambient Humidity Max.: 95% RH, non-condensing - Ambient Temperature: -30...50°C [-22...122°F] - Storage Temperature: -40...80°C [-40...176°F] - Servicing: Maintenance-free - Weight: 1.5 kg Operating Mode: The actuator is connected with a standard control signal of 0...10 V and moves the damper to the operating position while tensioning the return spring. The damper returns to the fail-safe position by spring force when the supply voltage is interrupted. Simple Direct Mounting: Easy direct mounting on the damper shaft with a universal shaft clamp, including an anti-rotation device. Adjustable Angle of Rotation: Mechanically adjustable angle of rotation with integrated end stops. High Functional Reliability: The actuator is overload protected, requires no limit switches, and automatically stops when the end stop is reached. Additional Accessories: - Electrical Accessories: - Auxiliary switch 2x SPDT (Type: S2A-F) - Feedback potentiometer 1 kΩ (Type: P1000A-F) - Signal converter voltage/current 100 kΩ 4...20 mA, Supply AC/DC 24 V (Type: Z-UIC) - Positioners for various mounting types (Types: SGA24, SGE24, SGF24, CRP24-B1) - Mechanical Accessories: - Shaft extension 170 mm ø10 mm for damper shaft ø6...16 mm (Type: AV6-20) - Shaft clamp reversible, clamping range ø16...20 mm (Type: K6-1) - Ball joint suitable for damper crank arm (Types: KH8, KH10, KG10A, KG8) - Damper crank arm Slot width 8.2 mm, clamping range ø10...18 mm (Type: KH8) - Actuator arm, clamping range ø8...16 mm, Slot width 8.2 mm (Type: KH-LF) - Angle of rotation limiter, with end stop (Type: ZDB-LF) - Form fit adapter 8x8 mm (Type: ZF8-LF) - Mounting kits for linkage operation (Types: ZG-LF1, ZG-LF3) - Anti-rotation mechanism 180 mm, Multipack 20 pcs. (Type: Z-ARS180L) For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£272.00£190.40
-
Belimo A-22AP-A04 Duct connector
Belimo Duct connector, Metal, L 100 mm, Tube connection 5 mm
£9.40£6.58
-
Belimo SRFA-S2 Actuator for Rotary and Butterfly Valves
The Belimo SRFA-S2 is a robust and reliable rotary actuator designed for ball valves. Featuring a fail-safe system, this actuator is ideal for HVAC applications in industrial and commercial environments. Its design ensures seamless integration into your system, high functional reliability, and simple installation. Click here for the technical data PDF Fail-Safe Operation: The SRFA-S2 actuator ensures that the valve returns to its fail-safe position when the supply voltage is interrupted, providing secure and reliable performance. Manual Override: The actuator, equipped with a hand crank and locking switch, can be manually operated in case of power failure or for maintenance purposes. Adjustable Angle of Rotation: The mechanical end stops allow for easy adjustment of the actuator’s angle of rotation to fit specific application needs. High Torque: It delivers a motor torque of 20 Nm and a fail-safe torque of 20 Nm, making it suitable for a variety of demanding applications. Flexible Signalling: Two integrated auxiliary switches provide straightforward monitoring and control with settings between 10% and 100% of the actuator’s range. Universal Power Supply: The actuator supports a wide range of input voltages (AC 24...240 V / DC 24...125 V) for versatile application. Electrical Data: - Nominal Voltage: AC 24...240 V / DC 24...125 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 19.2...264 V / DC 21.6...137.5 V - Power Consumption in Operation: 7 W - Power Consumption in Rest Position: 3.5 W - Power Consumption for Wire Sizing: 18 VA - Connection Supply/Control: 1 m cable, 2x 0.75 mm² - Parallel Operation: Supported Functional Data: - Torque Motor: 20 Nm - Torque Fail-Safe: 20 Nm - Direction of Motion Fail-Safe: Valve closed (A – AB = 0%) - Manual Override: Hand crank with locking switch - Running Time Motor: 75 seconds for 90° - Running Time Fail-Safe: <20 s (at -20 to 50°C) / <60 s (at -30°C) - Sound Power Level: 45 dB(A) - Position Indication: Mechanical - Service Life: Minimum 60,000 fail-safe positions Safety Data: - Protection Class (IEC/EN): II, reinforced insulation - Protection Class (UL): II, reinforced insulation - Degree of Protection (IEC/EN): IP54 - Degree of Protection (NEMA/UL): NEMA 2 - Enclosure (UL): Type 2 - EMC: CE certified (2014/30/EU) - Low Voltage Directive: CE certified (2014/35/EU) - Certification: IEC/EN 60730-1, IEC/EN 60730-2-14, cULus certified (UL60730-1A, UL60730-2-14) Environmental Data: - Rated Impulse Voltage Supply/Control: 4 kV - Rated Impulse Voltage Auxiliary Switch: 2.5 kV - Pollution Degree: 3 - Ambient Humidity: Max 95% RH, non-condensing - Ambient Temperature: -30 to 50°C - Storage Temperature: -40 to 80°C - Servicing: Maintenance-free Mechanical Data: - Weight: 2.4 kg Why You Should Buy the Belimo SRFA-S2: The SRFA-S2 actuator offers unmatched reliability and ease of use for HVAC systems. Its fail-safe function ensures that your system remains secure during power outages, while the flexible auxiliary switches and adjustable rotation provide great adaptability for different applications. With a universal power supply and robust build, this actuator fits a wide range of systems, saving you time and effort on installation and operation. For more information and to explore our range of Belimo products, visit [ecospares.co.uk/collections/belimo](https://www.ecospares.co.uk/collections/belimo). If you need assistance, feel free to reach us on 01772 284 626
£456.00£319.20
-
Burner Slide Plate Crank Arm
This crank arm is used by the belimo actuator to slide a safety plate when the boiler operates, to allow pellets to freely fall into the burn chamber. This crank is often found on the following models: WES E-Compact 28, 55, 85, 100, 125, 150, 199 WOODCO 28, 215 Trianco Greenflame 25, 55, 85, 100, 125, 150, 199 Part code: 100514 This crank arm connects the safety actuator (Belimo) to the slide assembley.
£25.09
-
Belimo ZPR01
Belimo Position indicator and tappet shaft, F07, square 45° offset, SW 17, DN 125...300
£127.00£88.90
-
Belimo SFA Fail-Safe Rotary Actuator
The Belimo SFA Rotary Actuator is engineered to adjust dampers in technical building installations with precision. Its robust design makes it ideal for controlling air dampers up to approximately 4 m² in size. This actuator ensures reliable performance with fail-safe capabilities, making it an essential component for HVAC systems. Click here for the technical data PDF Electrical Data: Nominal Voltage: AC 24...240 V / DC 24...125 V Nominal Voltage Frequency: 50/60 Hz Nominal Voltage Range: AC 19.2...264 V / DC 21.6...137.5 V Power Consumption in Operation: 7 W Power Consumption in Rest Position: 3.5 W Power Consumption for Wire Sizing: 18 VA Connection Supply / Control: Cable 1 m, 2x 0.75 mm² Parallel Operation: Yes (note the performance data) Functional Data: Torque Motor: 20 Nm Torque Fail-Safe: 20 Nm Direction of Motion Motor: Selectable by mounting L/R Direction of Motion Fail-Safe: Selectable by mounting L/R Manual Override: By means of hand crank and locking switch Angle of Rotation: Max. 95° (adjustable by mechanical end stop) Running Time Motor: 75 s / 90° Running Time Fail-Safe: <20 s @ -20...50°C / <60 s @ -30°C Sound Power Level, Motor: 45 dB(A) Mechanical Interface: Universal shaft clamp 10...25.4 mm Position Indication: Mechanical Service Life: Minimum 60,000 fail-safe positions Safety Data: Protection Class IEC/EN: II, reinforced insulation Protection Class UL: II, reinforced insulation Degree of Protection IEC/EN: IP54 Degree of Protection NEMA/UL: NEMA 2 Enclosure UL: Enclosure Type 2 EMC: CE according to 2014/30/EU Low Voltage Directive: CE according to 2014/35/EU Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 UL Approval: cULus according to UL60730-1A, UL60730-2-14, and CAN/CSA E60730-1 Hygiene Test: According to VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low-emission Type of Action: Type 1.AA Rated Impulse Voltage Supply / Control: 4 kV Pollution Degree: 3 Ambient Humidity Max.: 95% RH, non-condensing Ambient Temperature: -30...50°C [-22...122°F] Storage Temperature: -40...80°C [-40...176°F] Servicing: Maintenance-free Weight: 2.2 kg Operating Mode: Equipped with a universal power supply module that supports AC 24...240 V and DC 24...125 V. The actuator moves the damper to the operating position while tensioning the return spring, and the damper returns to the fail-safe position by spring force when the supply voltage is interrupted. Simple Direct Mounting: Direct mounting on the damper shaft with a universal shaft clamp, including an anti-rotation device to prevent actuator rotation. Manual Override: The damper can be manually actuated using the hand crank and locked in any position. Unlocking can be done manually or automatically by applying the operating voltage. Adjustable Angle of Rotation: The angle of rotation can be adjusted with mechanical end stops. High Functional Reliability: Overload protection ensures the actuator stops automatically when the end stop is reached, eliminating the need for limit switches. Electrical Accessories: Auxiliary switch 2x SPDT (Type: S2A-F) Feedback potentiometer 1 kΩ (Type: P1000A-F) Mechanical Accessories: Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm (Type: AV8-25) End stop indicator (Type: IND-AFB) Shaft clamp reversible for central mounting for damper shafts ø12.7 / 19.0 / 25.4 mm (Type: K7-2) Ball joint suitable for damper crank arm KH8 / KH10 (Type: KG10A) Actuator arm for 3/4" shafts, clamping range ø10...22 mm, Slot width 8.2 mm (Type: KH-AFB) Form fit insert 10x10 mm, Multipack 20 pcs. (Type: ZF10-NSA-F) Mounting kit for linkage operation for flat and side installation (Type: ZG-AFB) Anti-rotation mechanism 230 mm, Multipack 20 pcs. (Type: Z-ARS230L) Hand crank 63 mm (Type: ZKN2-B) For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£362.00£253.40
-
Belimo S2A switch 2 switch
Belimo S2A Auxiliary Switch for Damper and Rotary Actuators The Belimo S2A Auxiliary Switch isengineered for precise control and reliable performance in damper and rotary actuator applications. With its adjustable switching points and robust construction, the S2A is designed to enhance the functionality of your HVAC system. Click here for the technical data PDF Electrical Data Auxiliary Switch Type: 2x SPDT, 0...100%, adjustable Switching Capacity: - 1 mA...3 A (0.5 A inductive), DC 5 V...AC 250 V - 1 mA...0.5 A (0.2 A inductive; L/R = 3.4 ms), DC 5 V...DC 110 V Switching Points: Adjustable across the entire range of rotation 0...1 of the actuator. Presetting with scale possible. Connection: Cable 1 m, 6 x 0.75 mm² Safety and Certification Protection Class (IEC/EN): II, reinforced insulation Protection Class (UL): II, reinforced insulation Degree of Protection (IEC/EN): IP54 Degree of Protection (NEMA/UL): NEMA 2 Enclosure UL: Type 2 EMC Compliance: CE according to 2014/30/EU Low Voltage Directive: CE according to 2014/35/EU Certification: IEC/EN 60730-1 and IEC/EN 60730-2-14 UL Approval: cULus according to UL60730-1A, UL60730-2-14, and CAN/CSA E60730-1 Hygiene Test: VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low emission Environmental and Physical Data Rated Impulse Voltage: 4 kV Pollution Degree: 3 Ambient Humidity: Max. 95% RH, non-condensing Ambient Temperature: -30...50°C [-22...122°F] Storage Temperature: -40...80°C [-40...176°F] Servicing: Maintenance-free Weight: 0.20 kg Product Features Operating Mode: A carrier plate adapts to the shaft clamp (damper actuators) or position indication (rotary actuators), transferring the position directly to the switching cams of the micro switches.Simple Direct Mounting: Attached directly by the shaft clamp or position indication. Guiding grooves ensure a tightly sealing fit.Application: Used for signaling the position or exercising switching functions in any given angle setting.Manual Override: Gear train disengages with a holding button, allowing for manual override. Why Choose Belimo S2A? Adjustability: Easily adjustable switching points for versatile applications.Robust Construction: Durable design with high switching capacity ensures long-term reliability.Easy Installation: Direct mounting and clear operational instructions simplify setup and use.Certified Safety: Meets stringent international standards for safety and performance.Maintenance-Free: Designed for continuous, hassle-free operation. Find more Belimo products and detailed specifications on our website: www.ecospares.co.uk/collections/belimo. For any assistance, feel free to contact us.
£75.80£53.06
-
Belimo R2015-S1 Open/Close 2-Way Ball Valve
Open/close ball valve, 2-way, DN 15, Internal thread, Rp 1/2", PN 40, ps 1600 kPa, Kvs 15 m³/h, Fluid temperature -10...120°C [14...248°F] Click here for the technical data PDF For tradesmen and engineering companies seeking reliable and efficient components for their water systems, the Belimo Open/Close Ball Valve R2015-S1 is an excellent choice. These valves are designed for heating, ventilation, and air-conditioning systems and ensure optimal performance and longevity. The Belimo R2015-S1 series valves are designed for open and closed cold and warm water systems. They are ideal for shut-off functions in water systems and provide 2-point controls in air-handling units and heating systems. These valves are air-bubble tight, ensuring no leakage and maintaining system integrity. Functional Data: Fluid: Cold and warm water, water with glycol up to max. 50% vol. Fluid Temperature: -10°C to 120°C (14°F to 248°F) Note: At fluid temperatures of -10°C to 2°C, a spindle heater or valve neck extension is recommended. The allowed fluid temperature may be limited based on the type of actuator used. Close-off Pressure (Δps): 1400 kPa Differential Pressure (Δpmax): 1000 kPa (200 kPa for low-noise operation) Leakage Rate: Air-bubble tight, leakage rate A (EN 12266-1) Angle of Rotation: 90° Pipe Connection: Internal thread according to ISO 7-1 Installation Orientation: Upright to horizontal (relative to the stem) Servicing: Maintenance-free Materials: Valve Body: Nickel-plated brass Closing Element: Stainless steel Spindle: Stainless steel Spindle Seal: EPDM O-ring Seat: PTFE, O-ring EPDM Operating Mode: The open/close ball valve is adjusted by a rotary actuator, connected by an open/close signal. Turn the valve counterclockwise to open and clockwise to close. Flow Direction: The direction of flow is indicated by an arrow on the housing, ensuring correct installation and preventing damage. Permissible Installation Orientation: Upright to horizontal. Avoid hanging position (spindle pointing downwards). Electrical Accessories: Stem heater DN 15...50 (20 W) Type: ZR24-2 Mechanical Accessories: Valve neck extension for ball valve DN 15...50 Type: ZR-EXT-01 Pipe connectors for ball valve with internal thread: DN 15 Rp 1/2" Type: ZR2315 DN 20 Rp 3/4" Type: ZR2320 DN 25 Rp 1" Type: ZR2325 DN 32 Rp 1 1/4" Type: ZR2332 DN 40 Rp 1 1/2" Type: ZR2340 DN 50 Rp 2" Type: ZR2350 Why You Should Buy High Performance: With high close-off and differential pressures, these valves ensure reliable operation even under demanding conditions. Durability: Constructed with nickel-plated brass and stainless steel, these valves offer long-term durability and resistance to wear and corrosion. Ease of Installation and Maintenance: Featuring a simple design with internal threading, these valves are easy to install and require no maintenance, ensuring hassle-free operation. Comprehensive Accessories: A range of accessories is available to enhance functionality and adapt the valve to specific requirements. Additional Notes Water Quality Requirements: Adhere to VDI 2035 water quality requirements. A suitable strainer should be installed to keep the valves free from particle debris. Servicing: Ensure all electrical connections are isolated and the system is depressurized before servicing. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626.
£69.30£48.51
-
Belimo NM24A-S damper actuator
The Belimo NM24A-S is a robust and efficient damper actuator designed for adjusting dampers in technical building installations. Perfect for air damper sizes up to approximately 2 m², this actuator ensures precise control and high functional reliability. Click here for the technical data PDF Electrical Data Nominal Voltage: AC/DC 24 V Nominal Voltage Frequency: 50/60 Hz Nominal Voltage Range: AC 19.2...28.8 V / DC 19.2...28.8 V Power Consumption in Operation: 1.5 W Power Consumption in Rest Position: 0.2 W Power Consumption for Wire Sizing: 3.5 VA Auxiliary Switch: 1x SPDT, 0...100% Switching Capacity Auxiliary Switch: 1 mA...3 A (0.5 A inductive), DC 5 V...AC 250 V Connection Supply / Control: Cable 1 m, 3x 0.75 mm² Connection Auxiliary Switch: Cable 1 m, 3x 0.75 mm² Parallel Operation: Yes (note the performance data) Functional Data Torque Motor: 10 Nm Direction of Motion Motor: Selectable with switch 0 (ccw rotation) / 1 (cw rotation) Manual Override: With push-button, can be locked Angle of Rotation: Max. 95° Angle of Rotation Note: Can be limited on both sides with adjustable mechanical end stops Running Time Motor: 150 s / 90° Sound Power Level, Motor: 35 dB(A) Mechanical Interface: Universal shaft clamp 8...26.7 mm Position Indication: Mechanical, pluggable Safety Data Protection Class IEC/EN: III, Safety Extra-Low Voltage (SELV) Power Source UL: Class 2 Supply Protection Class Auxiliary Switch IEC/EN: II, reinforced insulation Degree of Protection IEC/EN: IP54 Degree of Protection NEMA/UL: NEMA 2 Enclosure UL Enclosure: Type 2 EMC: CE according to 2014/30/EU Low Voltage Directive: CE according to 2014/35/EU Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 UL Approval: cULus according to UL60730-1A, UL60730-2-14 and CAN/CSA E60730-1 Hygiene Test: According to VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low-emission Environmental Conditions Type of Action: Type 1.B Rated Impulse Voltage Supply / Control: 0.8 kV Rated Impulse Voltage Auxiliary Switch: 2.5 kV Pollution Degree: 3 Ambient Humidity Max.: 95% RH, non-condensing Ambient Temperature: -30...50°C [-22...122°F] Storage Temperature: -40...80°C [-40...176°F] Servicing: Maintenance-free Weight: 0.80 kg Why Choose the Belimo NM24A-S? Simple Installation: Direct mounting on the damper shaft with a universal shaft clamp, includes an anti-rotation device to prevent the actuator from rotating. High Reliability: The actuator is overload protected, requires no limit switches, and automatically stops when the end stop is reached, ensuring high functional reliability. Manual Override: Equipped with a manual override push-button, allowing for manual adjustments when necessary. Adjustable Angle of Rotation: The angle of rotation can be easily adjusted with mechanical end stops, providing flexibility in various applications. Flexible Signaling: Comes with an adjustable auxiliary switch (0...100%) for versatile signalling options. Accessories Electrical Accessories Auxiliary Switch 1x SPDT add-on: S1A Auxiliary Switch 2x SPDT add-on: S2A Feedback Potentiometer 140 Ω add-on: P140A Feedback Potentiometer 1 kΩ add-on: P1000A Feedback Potentiometer 10 kΩ add-on: P10000A Mechanical Accessories Actuator Arm for Standard Shaft Clamp: AH-25 Shaft Extension 240 mm: AV8-25 Ball Joint Suitable for Damper Crank Arm: KH8 KG8 Damper Crank Arm Slot Width 8.2 mm: KH8 Shaft Clamp One-sided: K-ENMA Form Fit Insert: ZF8-NMA, ZF10-NSA, ZF12-NSA, ZF15-NSA, ZF16-NSA Mounting Kit for Linkage Operation: ZG-NMA Anti-Rotation Mechanism: Z-ARS180 Baseplate Extension: Z-NMA Position Indicator: Z-PI For more details and to purchase Belimo products, don't hesitate to contact the ECO SPARES team for assistance.
£191.00£133.70
-
Belimo NM24-SR damper actuator
The Belimo NM24A-SR Modulating Damper Actuator is a high-performance actuator designed for adjusting air dampers in technical building installations. Ideal for air dampers up to approximately 2 m², this actuator delivers precise and reliable control, making it a top choice for HVAC professionals seeking robust and efficient damper solutions. Key Features Torque Motor: Provides a steady torque of 10 Nm for effective damper adjustments.Voltage Compatibility: Operates on AC/DC 24 V, supporting a frequency range of 50/60 Hz.Control Signal: Features modulating control from 2 to 10 V, ensuring accurate positioning.Position Feedback: Offers position feedback from 2 to 10 V for precise control and monitoring.Manual Override: Equipped with a manual override push-button that can be locked, providing flexibility during maintenance or adjustments.Adjustable Angle of Rotation: The angle of rotation can be limited on both sides using adjustable mechanical end stops.High Functional Reliability: Built with overload protection, the actuator automatically stops when end stops are reached, ensuring long-term durability.Universal Shaft Clamp: Facilitates easy direct mounting with a clamping range of 8 to 26.7 mm. Technical Specifications Nominal Voltage: AC/DC 24 V Voltage Range: AC 19.2...28.8 V / DC 19.2...28.8 V Power Consumption: - In Operation: 2 W - In Rest Position: 0.4 W - For Wire Sizing: 4 VA Torque: 10 Nm Operating Range: 2...10 V Input Impedance: 100 kΩ Position Accuracy: ±5% Running Time Motor: 150 s / 90° Sound Power Level: 35 dB(A) Protection Class: IEC/EN III, Safety Extra-Low Voltage (SELV) Degree of Protection: IEC/EN IP54, NEMA/UL NEMA 2 Ambient Temperature: -30...50°C Storage Temperature: -40...80°C Weight: 0.73 kg Safety and Compliance Certification: IEC/EN 60730-1, IEC/EN 60730-2-14 UL Approval: cULus according to UL60730-1A, UL60730-2-14, and CAN/CSA E60730-1 Hygiene Test: Compliant with VDI 6022 Part 1 / SWKI VA 104-01 for cleanability and low emissions. Pollution Degree: 3 Rated Impulse Voltage: 0.8 kV EMC Compliance: CE according to 2014/30/EU Accessories Electrical: Auxiliary switches (S1A, S2A), Feedback potentiometers (P140A, P1000A, P10000A), Signal converter (Z-UIC), Positioners (SGA24, SGE24, SGF24, CRP24-B1). Mechanical: Actuator arms, Shaft extensions, Ball joints, Damper crank arms, Shaft clamps, Form fit inserts, Anti-rotation mechanisms, Baseplate extensions, Position indicators. Installation and Usage Direct Mounting: Simple installation on damper shafts with universal shaft clamp and anti-rotation device. Manual Override: Push-button disengages gear train for manual adjustments. Parallel Operation: Supports parallel operation with other actuators, adhering to performance data.Wiring: Supplied from isolating transformer with parallel connection capability. Why Choose the Belimo NM24A-SR? The Belimo NM24A-SR offers unmatched reliability and performance for air damper control in technical building installations. Its robust features, coupled with high precision and ease of installation, make it an ideal choice for professionals seeking durable and efficient damper actuators. The device's compliance with international safety and hygiene standards further ensures it meets the rigorous demands of modern HVAC systems. Explore More Belimo Products All Belimo products, including the NM24A-SR Modulating Damper Actuator, can be found on our website http://www.ecospares.co.uk/collections/belimo. If you need any assistance or have questions, please don't hesitate to get in touch with us. Specifications Ambient Temperature -30...50°C [-22...122°F] Angle of rotation 95 Connection Supply Control Cable 1 m, 4x 0.75 mm² Control type DC 2...10 V Degree Of Protection NEMA NEMA 2 Direction Of Motion Motor selectable with switch 0/1 Enclosure Type UL Enclosure Type 2 Manual override With push-button, can be locked Mechanical interface Universal shaft clamp 8...26.7 mm Power consumption (holding) 0.4 W Power consumption (running) 2 W Power Consumption For Wire Sizing 4 VA Protection category IP54 Running time (motor) 150 s / 90° Torque 10 Nm Voltage AC/DC AC/DC 24 V
£226.00£158.20
-
Belimo LM230A Damper Actuator
The Belimo LM230A is a high-performance damper actuator designed for adjusting dampers in technical building installations. It is ideal for stationary heating, ventilation, and air-conditioning systems, providing reliable and efficient control. The LM230A ensures optimal performance and is suitable for air damper sizes up to approximately 1 m². Click here for the technical data PDF Nominal Voltage and Power Consumption: Nominal Voltage: AC 100...240 V Nominal Voltage Frequency: 50/60 Hz Nominal Voltage Range: AC 85...265 V Power Consumption in Operation: 1.5 W Power Consumption in Rest Position: 0.5 W Power Consumption for Wire Sizing: 3.5 VA Connection Supply / Control: Cable 1 m, 3x 0.75 mm² Parallel Operation: Yes (note the performance data) Functional Data: Torque Motor: 5 Nm Direction of Motion Motor: Selectable with switch 0 (ccw rotation) / 1 (cw rotation) Manual Override: With push-button, can be locked Angle of Rotation: Max. 95° Angle of Rotation Note: Can be limited on both sides with adjustable mechanical end stops Running Time Motor: 150 s / 90° Sound Power Level: 35 dB(A) Mechanical Interface: Universal shaft clamp 6...20 mm Position Indication: Mechanical, pluggable Safety Data: Protection Class IEC/EN: II, reinforced insulation Protection Class UL: II, reinforced insulation Degree of Protection IEC/EN: IP54 Degree of Protection NEMA/UL: NEMA 2 Enclosure UL: Enclosure Type 2 EMC: CE according to 2014/30/EU Low Voltage Directive: CE according to 2014/35/EU Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 UL Approval: cULus according to UL60730-1A, UL60730-2-14 and CAN/CSA E60730-1 Hygiene Test: According to VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low-emission Type of Action: Type 1 Rated Impulse Voltage Supply / Control: 2.5 kV Pollution Degree: 3 Ambient Humidity Max.: 95% RH, non-condensing Ambient Temperature: -30...50°C [-22...122°F] Storage Temperature: -40...80°C [-40...176°F] Servicing: Maintenance-free Weight: 0.46 kg Simple Direct Mounting: It is easy to mount on the damper shaft with a universal shaft clamp. It includes an anti-rotation device to prevent actuator rotation. Manual Override: This is possible with a push-button disengaging the gear train. Adjustable Angle of Rotation: Adjustable with mechanical end stops for precision control. High Functional Reliability: An overload-protected actuator that requires no limit switches and automatically stops at the end stop. Electrical Accessories: Auxiliary switch 1x SPDT add-on (Type: S1A) Auxiliary switch 2x SPDT add-on (Type: S2A) Feedback potentiometer 140 Ω add-on (Type: P140A) Feedback potentiometer 1 kΩ add-on (Type: P1000A) Feedback potentiometer 10 kΩ add-on (Type: P10000A) Mechanical Accessories: Shaft extension 170 mm ø10 mm for damper shaft ø6...16 mm (Type: AV6-20) Shaft clamp one-sided, clamping range ø6...20 mm, Multipack 20 pcs. (Type: K-ELA) Shaft clamp one-sided, clamping range ø6...10 mm, Multipack 20 pcs. (Type: K-ELA10) Shaft clamp one-sided, clamping range ø6...13 mm, Multipack 20 pcs. (Type: K-ELA13) Shaft clamp one-sided, clamping range ø6...16 mm, Multipack 20 pcs. (Type: K-ELA16) Anti-rotation mechanism 180 mm, Multipack 20 pcs. (Type: Z-ARS180) Form fit insert 8x8 mm, Multipack 20 pcs. (Type: ZF8-LMA) Form fit insert 10x10 mm, Multipack 20 pcs. (Type: ZF10-LMA) Form fit insert 12x12 mm, Multipack 20 pcs. (Type: ZF12-LMA) Form fit insert 8x8 mm with angle of rotation limiter and position indication, Multipack 20 pcs. (Type: ZFRL8-LMA) Form fit insert 10x10 mm with angle of rotation limiter and position indication, Multipack 20 pcs. (Type: ZFRL10-LMA) Form fit insert 12x12 mm with angle of rotation limiter and position indication, Multipack 20 pcs. (Type: ZFRL12-LMA) Position indicator, Multipack 20 pcs. (Type: Z-PI) Wiring Colours: 1 = blue 2 = brown 3 = white Why You Should Buy High Efficiency: Low power consumption in both operation and rest position, ensuring energy savings. Durability: Reinforced insulation and high degree of protection against environmental factors. Easy Installation: Simple direct mounting and adjustable features make installation straightforward. Reliability: High functional reliability and maintenance-free design. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626. Would you like a list of keywords for digital marketing, guiding content creation, PPC campaigns to attract targeted audiences, and enhancing ad reach on platforms like Google Ads? This list will include both long and short-tail keywords to improve your product visibility and inform social media hashtags.
£130.00£91.00
-
Belimo C420Q-K Zone Valve
Zone valve, 2-way, DN 20, External thread, G 3/4", PN 25, ps 1600 kPa, Kvs 7.8 m³/h, Fluid temperature 2...100°C [36...212°F] (with actuator 2...90°C) The Belimo Zone Valve C420Q-K is an advanced, high-performance valve designed for closed cold and warm water systems, ideal for shut-off functions and modulating controls in air-handling units and heating systems. Featuring a tool-free snap-assembly actuator and adjustable kvs values, this valve ensures precision and reliability in various HVAC applications. Click here for the technical data PDF Included Parts and Accessories Standard Package: Valve body Rotary actuator (specific model based on control requirements) Optional Accessories: Spindle extension (Type: ZCQ-E) Pipe connectors for DN15 (Rp 1/2") and DN20 (Rp 3/4") ball valves Functional Data: Fluid: Cold and warm water, water with glycol up to max. 50% vol. Fluid Temperature: 2...100°C [36...212°F] with actuator: 2...90°C Close-off Pressure (∆ps): 520 kPa Differential Pressure (Δpmax): 280 kPa (50 kPa for low-noise operation) Flow Characteristic: Equal percentage (VDI/VDE 2173), optimised in the opening range Leakage Rate: Air-bubble tight, leakage rate A (EN 12266-1) Flow Setting: Adjustable in 2.5° increments Angle of Rotation: 90° (Operating range 15...90°) Pipe Connection: External thread according to ISO 228-1 Installation Orientation: Upright to horizontal (in relation to the stem) Servicing: Maintenance-free Materials: Valve Body: Brass Closing Element: Chrome-plated brass Spindle: Brass Spindle Seal: EPDM O-ring Seat: PTFE, O-ring EPDM Safety and Compliance: Protection Class (IEC/EN): Rated according to specific actuator used Degree of Protection (NEMA/UL): Rated according to specific actuator used Certification: Compliance with EMC and other relevant standards Operating Mode: The ball valve is adjusted by a rotary actuator, controlled by an open/close signal or a modulating control system. Simple Direct Mounting: Tool-free snap assembly for quick and easy installation. Flow Direction: Can operate in both flow directions. Flow Setting Adjustability: Angle of rotation can be adjusted to set the kvs value, ensuring optimal flow rates. Maintenance-Free Design: Engineered for long-term reliability with no maintenance required. Installation Notes Orientation: Install upright to horizontal. Avoid hanging positions. Water Quality: Adhere to VDI 2035 water quality requirements to prevent particle debris. Flow Setting: Adjust kvs value by modifying the actuator's angle of rotation. Trigger adaptation on modulating actuators after changes. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£45.70£31.99
-
Belimo C215QP-D two-way zone valve
PI Zone Valve (PIQCV), 2-way, DN 15, Internal thread, Rp 1/2", PN 25, ps 1600 kPa, V'nom 420 l/h, Fluid temperature -20...120°C [-4...248°F] (with actuator 2...90°C) Click here for the technical data PDF Belimo PI Zone Valve, 2Way, Internal Thread The Belimo PI Zone Valve is an advanced solution designed for modulating control of airhandling and heating systems on the water side, ideal for use in closed cold and warm water systems. Its snapassembly actuator ensures ease of installation and reliable operation. Explore our comprehensive range here on ECO SPARES Product Overview Type Overview: C215QPB: DN 15, Rp 1/2, Nominal Flow 0.058 l/s, 210 l/h, 0.21 m³/h C215QPD: DN 15, Rp 1/2, Nominal Flow 0.117 l/s, 420 l/h, 0.42 m³/h C215QPTB: DN 15, Rp 1/2, Nominal Flow 0.058 l/s, 210 l/h, 0.21 m³/h C215QPTD: DN 15, Rp 1/2, Nominal Flow 0.117 l/s, 420 l/h, 0.42 m³/h C220QPF: DN 20, Rp 3/4, Nominal Flow 0.272 l/s, 980 l/h, 0.98 m³/h C220QPTF: DN 20, Rp 3/4, Nominal Flow 0.272 l/s, 980 l/h, 0.98 m³/h C225QPTG: DN 25, Rp 1, Nominal Flow 0.583 l/s, 2100 l/h, 2.1 m³/h PT = Version with measuring ports (P/T ports) Technical Specifications Functional Data Fluid: Cold and warm water, water with glycol up to max. 50% vol. Fluid Temperature: 20...120°C [4.0...248°F], with actuator 2...90°C Differential Pressure: 16...350 kPa Closeoff Pressure: ∆ps 1400 kPa Flow Characteristic: Equal percentage (VDI/VDE 2173), optimized in the opening range Pressure Stability: ±5% with a pressure value of 35...350 kPa, ±10% with a pressure value of 16...35 kPa Leakage Rate: Airbubble tight, leakage rate A (EN 122661) Angle of Rotation: 90°, Operating range 15...90° Pipe Connection: Internal thread according to ISO 71 Installation Orientation: Upright to horizontal (in relation to the stem) Servicing: Maintenance free Materials Valve Body: Brass Closing Element: Stainless steel Spindle: Stainless steel Spindle Seal: EPDM Oring Seat: PTFE, Oring EPDM Diaphragm: EPDM Safety Notes Designed for use in stationary heating, ventilation, and air conditioning systems. Only authorised specialists may carry out installation. Must not be used outside the specified field of application. Disposal must follow local regulations. Product Features Operating Mode: Adjusted by a rotary actuator, controlled by a commercially available modulating or 3 point control system. Flow Characteristic: Equal percentage flow control ensured by the special design of the ball. Constant Flow Volume: Achieved with a differential pressure of 16…350 kPa. Measuring Ports (P/T Ports): Available in C2..QPT.. type valves for differential pressure measurement and optimization. Installation Notes Permissible installation orientation is upright to horizontal, not hanging. Installation in the return is recommended. Adhere to VDI 2035 water quality requirements. Keep valves free from particle debris; installation of a suitable strainer is recommended. Ensure flow direction as specified by the arrow on the housing. Accessories Spindle Extension: CQ ZCQE Flow Limiter: PIQCV ZCQFL Pipe Connector: DN 15 Rp 1/2" ZR2315 DN 20 Rp 3/4" ZR2320 DN 25 Rp 1" ZR2325 For more details and to view our entire range, please visit (http://www.ecospares.co.uk). If you need assistance, feel free to get in touch with us.
£139.00£97.30
-
Belimo C215QPT-B (2-way) PI Zone Valve
The Belimo PI Zone Valve, 2-way with internal thread, is engineered for closed cold and warm water systems. It delivers precise control for air handling and heating systems. Ideal for tradespeople and engineering companies, this valve ensures optimal performance and reliability. - Functional Data: - Fluid: Cold and warm water with glycol up to max. 50% vol. - Fluid Temperature: -20...120°C [-4.0...248°F] - Differential Pressure: 16...350 kPa - Close-off Pressure: ∆ps 1400 kPa - Flow Characteristic: Equal percentage (VDI/VDE 2173), optimized in the opening range - Pressure Stability: ±5% (35...350 kPa), ±10% (16...35 kPa) - Leakage Rate: Air-bubble tight, leakage rate A (EN 12266-1) - Angle of Rotation: 90° (Operating range 15...90°) - Pipe Connection: Internal thread according to ISO 7-1 - Installation Orientation: Upright to horizontal (in relation to the stem) - Servicing: Maintenance-free - Material Composition: - Valve Body: Brass - Closing Element: Stainless steel - Spindle: Stainless steel - Spindle Seal: EPDM O-ring - Seat: PTFE, O-ring EPDM - Diaphragm: EPDM Operating Mode: The ball valve is adjusted by a rotary actuator, controlled by a modulating or 3-point control system. Flow Characteristic: Equal percentage flow control is ensured by the special design of the ball. Constant Flow Volume: Maintains a constant flow volume with a differential pressure of 16…350 kPa. Measuring Ports (P/T Ports): These are included in C2..QPT-.. types for easy pressure differential measurement. Installation Orientation: Permissible upright to horizontal installation. Not suitable for hanging installation. Servicing: Maintenance-free ball valves and rotary actuators. Before any service work, ensure the rotary actuator is isolated from the power supply. - Mechanical Accessories: - Spindle Extension: CQ ZCQ-E - Flow Limiter: PIQCV ZCQ-FL - Pipe Connector: Available for DN 15, DN 20, and DN 25 with respective internal threads. Why You Should Buy: - Precision Control: Optimized for modulating control in HVAC systems. - Durability: Made with high-quality materials like brass and stainless steel for long-lasting performance. - Easy Maintenance: Designed to be maintenance-free, reducing downtime and service costs. - Versatility: Suitable for a wide range of applications in heating and cooling systems. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626.
£169.00£118.30
-
Belimo CQ24A-SZ Rotary Actuator
The Belimo CQ24A-SZ is a high-performance rotary actuator designed to precisely control zone valves in HVAC systems. Engineered for reliability and ease of use, it ensures optimal operation in various environments, making it ideal for tradesmen and engineering companies. Click here for the technical data PDF Electrical Data: - Nominal Voltage: AC/DC 24 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 19.2...28.8 V / DC 21.6...28.8 V - Power Consumption in Operation: 0.3 W - Power Consumption in Rest Position: 0.3 W - Power Consumption for Wire Sizing: 0.6 VA - Connection Supply / Control: Cable 1 m, 4 x 0.34 mm² - Parallel Operation: Yes (note the performance data) Functional Data: - Torque Motor: 1 Nm - Operating Range (Y): 0.5...10 V - Input Impedance: 100 kΩ - Position Feedback (U): 0.5...10 V - Manual Override: With actuator (clicked out) - Running Time Motor: 75 s / 90° - Sound Power Level, Motor: 35 dB(A) - Position Indication: Mechanical - Flow Setting: See product features Safety Data: - Protection Class IEC/EN: III, Safety Extra-Low Voltage (SELV) - Degree of Protection IEC/EN: IP40 - EMC: CE according to 2014/30/EU - Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 - Type of Action: Type 1 - Rated Impulse Voltage Supply / Control: 0.8 kV - Pollution Degree: 2 - Ambient Humidity Max.: 95% RH, non-condensing - Ambient Temperature: 5...40°C [41...104°F] - Storage Temperature: -40...80°C [-40...176°F] - Servicing: Maintenance-free Mechanical Data: - Weight: 0.21 kg Product Features: - Simple Direct Mounting: Easy snap-assembly without tools. - Adjustable Angle of Rotation: Allows precise control over flow rates. - High Functional Reliability: Overload protection and automatic stop at end positions. - Flow Setting: Adjustable kv-values per respective zone valve data sheets. Accessories: - Spindle Extension: CQ ZCQ-E - Housing Cover: CQ, Colour: white (RAL 9010) ZCQ-W - End Stop Clip: Multipack 5 pcs. ZCQ-C, Multipack 20 pcs. Z-ESCM Installation Notes: - Electrical Installation: Supply from isolating transformer. Parallel connection of other actuators is possible; observe performance data. - Wiring Colours: 1 = black, 2 = red, 3 = white, 5 = orange - Operating Controls: Push-button triggers angle of rotation adaptation followed by standard mode. Why Choose the Belimo CQ24A-SZ: - Reliability: Ensures high functional reliability with maintenance-free operation. - Flexibility: Adjustable angle of rotation and easy snap-assembly. - Compliance: Meets all relevant safety and performance standards, including CE and IEC/EN certifications. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626.
£88.70£62.09
-
Belimo NV24A-MP-RE Globe Valve Actuator
The Belimo NV24A-MP-RE is a high-performance globe valve actuator designed for 2-way and 3-way globe valves. This actuator is ideal for HVAC systems, offering precise control and robust performance with a nominal actuating force of 1000 N. It operates efficiently on an AC/DC 24 V power supply and supports modulating control through the MP-Bus. Click here for the technical data PDF Electrical Specifications: - Nominal Voltage: AC/DC 24 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 19.2...28.8 V / DC 21.6...28.8 V - Power Consumption: - In Operation: 1.5 W - At Rest: 0.5 W - For Wire Sizing: 3 VA - Connection Supply / Control: Terminals 4 mm² (cable ø4...10 mm) - Parallel Operation: Yes Functional Specifications: - Actuating Force: 1000 N - Stroke: 20 mm - Control Type: Modulating, Communicative (2...10 V) - Communication: MP-Bus (supports up to 8 nodes) - Position Feedback: 2...10 V, Max. 0.5 mA - Manual Override: Push-button with lock - Running Time: 150 s for 20 mm stroke (adjustable 90...150 s) - Position Accuracy: ±5% - Angle of Rotation: Adjustable via manual adaptation - Sound Power Level: 45 dB(A) Safety and Compliance: - Protection Class (IEC/EN): III, Safety Extra-Low Voltage (SELV) - Power Source UL: Class 2 Supply - Degree of Protection: - IEC/EN: IP54 - NEMA/UL: NEMA 2 - Enclosure UL: Type 2 - EMC Compliance: CE according to 2014/30/EU - Low Voltage Directive: CE according to 2014/35/EU - Certification: IEC/EN 60730-1 and IEC/EN 60730-2-14 - UL Approval: cULus according to UL60730-1A, UL60730-2-14, and CAN/CSA E60730-1 Environmental Conditions: - Ambient Humidity: Max. 95% RH, non-condensing - Ambient Temperature: 0...50°C - Storage Temperature: -40...80°C - Pollution Degree: 3 Product Features: - High Functional Reliability: Overload protection, no need for limit switches, automatic stopping at end positions. - Manual Override: Possible with a push-button, disengaging the gear train. - Home Position: Actuator stem is retracted at factory setting. - Adaptation and Synchronization: Automatic and manual options available for precise control. - Mounting Options: Compatible with third-party valves using RetroFIT+ accessories. Accessories: - Electrical: - Auxiliary switch (S2A-H) - MP-Bus power supply (ZN230-24MP) - Mechanical: - Spacer rings (e.g., ZNV-203) - Adapter kits for various valve brands (e.g., ZNV-205) - Tools: - Service tool (ZTH EU) - PC-Tool software for adjustments (MFT-P) For more information and to explore our range of Belimo products, visit our website at https://www.ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626.
£506.00£354.20
-
Belimo GM24A Damper Actuator
The Belimo GM24A Damper Actuator is designed to adjust dampers in technical building installations. Ideal for tradesmen and engineering companies, it offers robust performance for air dampers up to approximately 8 m². This actuator's versatile and user-friendly features ensures efficient and reliable damper control. Electrical Data: - Nominal Voltage: AC/DC 24 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 19.2...28.8 V / DC 19.2...28.8 V - Power Consumption in Operation: 4 W - Power Consumption in Rest Position: 2 W - Power Consumption for Wire Sizing: 6 VA - Connection Supply / Control: Cable 1 m, 3x 0.75 mm² - Parallel Operation: Yes (note the performance data) Functional Data: - Torque Motor: 40 Nm - Direction of Motion Motor: Selectable with switch 0 (ccw rotation) / 1 (cw rotation) - Manual Override: With push-button, can be locked - Angle of Rotation: Max. 95° - Angle of Rotation Note: Can be limited on both sides with adjustable mechanical end stops - Running Time Motor: 150 s / 90° - Sound Power Level Motor: 45 dB(A) - Mechanical Interface: Universal shaft clamp reversible 12...26.7 mm - Position Indication: Mechanical, pluggable Safety Data: - Protection Class IEC/EN: III, Safety Extra-Low Voltage (SELV) - Power Source UL: Class 2 Supply - Degree of Protection IEC/EN: IP54 - Degree of Protection NEMA/UL: NEMA 2 - Enclosure UL: Enclosure Type 2 - EMC: CE according to 2014/30/EU - Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 - UL Approval: cULus according to UL60730-1A, UL60730-2-14, and CAN/CSA E60730-1 - Hygiene Test: According to VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low emission - Type of Action: Type 1 - Rated Impulse Voltage Supply / Control: 0.8 kV - Pollution Degree: 3 Environmental Data: - Ambient Humidity Max.: 95% RH, non-condensing - Ambient Temperature: -30...50°C [-22...122°F] - Storage Temperature: -40...80°C [-40...176°F] - Servicing: Maintenance-free - Weight: 1.6 kg Product Features - Simple Direct Mounting: Easy installation on the damper shaft with a universal shaft clamp, including an anti-rotation device. - Manual Override: Push-button manual override is used to disengage the gear train. - Adjustable Angle of Rotation: Customizable with mechanical end stops. - High Functional Reliability: Overload protection and automatic stop when the end stop is reached. Accessories - Electrical Accessories: - Auxiliary switch 1x SPDT add-on (S1A) - Auxiliary switch 2x SPDT add-on (S2A) - Feedback potentiometer 140 Ω add-on (P140A) - Feedback potentiometer 1 kΩ add-on (P1000A) - Feedback potentiometer 10 kΩ add-on (P10000A) - Mechanical Accessories: - Actuator arm for standard shaft clamp (AH-GMA) - Ball joint suitable for damper crank arm (KH8 / KH10 KG10A) - Damper crank arm Slot width 8.2 mm, clamping range ø14...25 mm (KH10) - Anti-rotation mechanism 230 mm, Multipack 20 pcs. (Z-ARS230) - Mounting kit for linkage operation for flat installation (ZG-GMA) - Baseplate extension for GM..A to GM.. (Z-GMA) - Position indicator, Multipack 20 pcs. (Z-PI) Notes - Wire Colours: - 1 = black - 2 = red - 3 = white For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626.
£316.00£221.20
-
Belimo 22DT-14N Temperature Sensor
The Belimo 22DT-14N A duct/immersion temperature sensor is an active sensor designed to measure temperature precisely in duct applications. It is also suitable for pipe applications when combined with a stainless steel or brass thermowell. This sensor has a robust IP65/NEMA 4X-rated enclosure and ensures reliable performance in various environmental conditions. Click here for the technical data PDF Parts Included - Mounting Clip: A-22D-A11 (with screws and adhesive foil) Electrical Data - Nominal Voltage: DC 24 V - Nominal Voltage Range: DC 13.5...26.4 V - Power Consumption: 0.5 W - Electrical Connection: Pluggable spring-loaded terminal block, max. 2.5 mm² - Cable Entry: Cable gland with strain relief, ø6...8 mm Functional Data - Sensor Technology: Based on Pt1000 1/3 DIN - Application: Air, Water - Multirange: 8 measuring ranges selectable - Current Output: 1x 4...20 mA, max. resistance 500 Ω - Measured Values: Temperature Measuring Data - Measuring Range Settings: - S0: -50...50°C - S1: -10...120°C - S2: 0...50°C - S3: 0...250°C - S4: -15...35°C - S5: 0...100°C - S6: -20...80°C - S7: 0...160°C - Accuracy Temperature: ±0.5°C @ 21°C - Long-term Stability: ±0.04°C p.a. @ 21°C - Time Constant (τ 63%) in Water Pipe: - Typical 7 s with thermowell brass - Typical 9 s with thermowell stainless steel - Time Constant (τ 63%) in Air Duct: - Typical 46 s @ 3 m/s - Typical 210 s @ 0 m/s Safety Data - Protection Class IEC/EN: III, Protective Extra-Low Voltage (PELV) - Power Source UL: Class 2 Supply - Degree of Protection IEC/EN: IP65 - Degree of Protection NEMA/UL: NEMA 4X - Enclosure UL: Enclosure Type 4X - Certification IEC/EN: IEC/EN 60730-1 - UL Approval: cULus acc. to UL60730-1A/-2-9, CAN/CSA E60730-1/-2-9 - Type of Action: Type 1 - Rated Impulse Voltage Supply: 0.8 kV - Pollution Degree: 3 - Ambient Humidity: Max. 95% RH, non-condensing - Ambient Temperature: -35...50°C - Fluid Temperature: -50...160°C - Housing Surface Temperature: Max. 70°C Materials - Cable Gland: PA6, black - Housing: - Cover: PC, orange - Bottom: PC, orange - Seal: NBR70, black - UV resistant - Probe Material: V4A (1.4404) Accessories - Mounting Plate: S housing A-22D-A09 - Connection Adapter: Flex conduit, M20x1.5, for cable gland 1x 6 mm, Multipack 10 pcs. A-22G-A01.1 Optional Accessories (Air) - Mounting Flange for Sensor Probe: - 6 mm, up to max. 120°C, Plastic A-22D-A03 - 6 mm, up to max. 260°C, Brass A-22D-A05 Recommended Accessories (Water) - Thermowell Stainless Steel: - 50 mm, G 1/2", SW27 A-22P-A06 - 100 mm, G 1/2", SW27 A-22P-A08 - 150 mm, G 1/2", SW27 A-22P-A10 - 200 mm, G 1/2", SW27 A-22P-A12 - 300 mm, G 1/2", SW27 A-22P-A14 - 450 mm, G 1/2", SW27 A-22P-A16 - Thermowell Brass: - 50 mm, R 1/2", SW22 A-22P-A18 - 100 mm, R 1/2", SW22 A-22P-A20 - 150 mm, R 1/2", SW22 A-22P-A22 - 200 mm, R 1/2", SW22 A-22P-A24 - 300 mm, R 1/2", SW22 A-22P-A26 - 450 mm, R 1/2", SW22 A-22P-A28 - Compression Fitting: Stainless steel, G 1/4" (external thread) for 6 mm, with cutting ring A-22P-A45 - Cold Barrier: Plastic, L 50 mm, for thermowell A-22P-A.. A-22P-A51 - Syringe with Thermal Contact Fluid: A-22P-A44 Notes - Accuracy and Stability: Ensure accurate and stable performance with ±0.5°C temperature accuracy and ±0.04°C long-term stability. - Installation Tips: For optimal performance, avoid drafts and power surges during installation. Utilize two GND-wires to avoid measurement deviations. - Environmental Compatibility: Rated for use in harsh environments with an IP65/NEMA 4X enclosure. For more information and to explore our range of Belimo products, visit our website at http://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626. --- Would you like a list of keywords for digital marketing, guiding content creation, PPC campaigns, and social media hashtags to enhance product visibility? If yes, I can provide both long and short-tail keywords and relevant phrases.
£89.40£62.58
-
Belimo R2025-10-S2 Control Valve
Discover the precision and reliability of the Belimo R2025-10-S2 Characterised Control Valve, designed for optimal performance in open and closed cold and warm water systems. Ideal for modulating control of air-handling and heating systems on the waterside, this valve ensures air-bubble-tight sealing and efficient fluid management. Click here for the technical data PDF Functional Data: - Fluid: Cold and warm water, water with glycol up to max. 50% vol. - Fluid Temperature: -10...120°C [14...248°F] - Note: At fluid temperatures of -10...2°C, a spindle heater or valve neck extension is recommended. Fluid temperature limits may vary based on the actuator type. - Close-off Pressure ∆ps: 1400 kPa - Differential Pressure Δpmax: 350 kPa - Note: 200 kPa for low-noise operation - Flow Characteristic: Equal percentage (VDI/VDE 2173), optimized in the opening range - Leakage Rate: Air-bubble tight, leakage rate A (EN 12266-1) - Angle of Rotation: 90° - Note: Operating range 15...90° - Pipe Connection: Internal thread according to ISO 7-1 - Installation Orientation: Upright to horizontal (in relation to the stem) - Servicing: Maintenance-free Material Composition: - Valve Body: Nickel-plated brass - Closing Element: Stainless steel - Spindle: Stainless steel - Spindle Seal: EPDM O-ring - Seat: PTFE, O-ring EPDM - Characterised Disc: ETFE Product Features: Operating Mode: It is adjusted by a rotary actuator controlled by a commercially available modulating or 3-point control system. The ball of the valve (throttling device) moves to the position dictated by the control signal. - Flow Characteristic: The integrated characterising disc ensures Equal percentage flow control. Additional Accessories: - Electrical Accessories: - Stem heater DN 15...50 (20 W) - Type: ZR24-2 - Mechanical Accessories: - Valve neck extension for ball valve DN 15...50 - Type: ZR-EXT-01 - Pipe connectors for ball valves with internal thread: - DN 15 Rp 1/2" - Type: ZR2315 - DN 20 Rp 3/4" - Type: ZR2320 - DN 25 Rp 1" - Type: ZR2325 - DN 32 Rp 1 1/4" - Type: ZR2332 - DN 40 Rp 1 1/2" - Type: ZR2340 - DN 50 Rp 2" - Type: ZR2350 Installation Notes: - Permissible Installation Orientation: The ball valve can be installed upright to horizontal, but not in a hanging position (spindle pointing downwards). - Water Quality Requirements: Adhere to VDI 2035. Ensure valves are free from particle debris. Installation of a suitable strainer is recommended. Why You Should Buy: - Reliability: Designed for robust performance in HVAC systems. - Efficiency: Optimized for low-noise and efficient fluid control. - Durability: Constructed from high-quality materials, ensuring long-lasting operation. - Ease of Installation: Flexible installation orientations and maintenance-free design. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626.
£104.00£72.80
-
Belimo HT230-3 Rotary Actuator
The Belimo HT230-3 Rotary Actuator is a robust and reliable solution for motorising common mixing valves in HVAC systems. This actuator, designed for ease of use and maximum efficiency, is ideal for stationary heating, ventilation, and air-conditioning systems. A high-torque motor and user-friendly features ensure seamless operation and maintenance. Click here for the technical data PDF Electrical Data: - Nominal Voltage: AC 230 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 198...264 V - Power Consumption in Operation: 3.5 W - Power Consumption for Wire Sizing: 3.5 VA - Connection Supply/Control: Cable 1 m, 3x 0.75 mm² - Parallel Operation: No Functional Data: - Torque Motor: 10 Nm - Direction of Motion Motor: Clockwise rotation - Manual Override: Temporary and permanent gear train disengagement with rotary knob on the housing - Angle of Rotation: 90° - Running Time Motor: 140 s / 90° - Sound Power Level Motor: 37 dB(A) - Duty Cycle Value: 75% (= active time 140 s / operating time 187 s) - Position Indication: Reversible scale plate Safety Data: - Protection Class IEC/EN: II, reinforced insulation - Degree of Protection IEC/EN: IP40 - EMC: CE according to 2014/30/EU - Low Voltage Directive: CE according to 2014/35/EU - Type of Action: Type 1 - Rated Impulse Voltage Supply/Control: 4 kV - Pollution Degree: 3 - Ambient Humidity Max: 95% RH, non-condensing - Ambient Temperature: 0...50°C [32...122°F] - Storage Temperature: -30...80°C [-22...176°F] - Servicing: Maintenance-free - Weight: 0.49 kg - Housing Colours: Orange (both cover and base) Accessories: - Electrical Accessories: - Auxiliary switch 1x SPDT for 3-point HT actuators with cable connection (Type: SNR) - Mechanical Accessories: - Mounting kit for LK mixing valve (Type: MS-NRA) - Mounting kit for Barberi mixing valves (Type: MS-NRB) - Mounting kit for Honeywell/Centra DR..MA mixing valves (Type: MS-NRC) - Mounting kit for Honeywell/Centra DRU.. mixing valves (Type: MS-NRC1) - Mounting kit for mixing valves with 12 mm round shaft (Type: MS-NRE) - Mounting kit for ESBE mixing valves VRG/VRB/VRH (Type: MS-NRE6) - Mounting kit for Hora mixing valves (Type: MS-NRH) - Mounting kit for Siemens/Landis&Stäfa mixing valves VCI/VBG/VBF (Type: MS-NRL) - Mounting kit for Lazzari mixing valves (Type: MS-NRLA) - Mounting kit for Lovato mixing valves (Type: MS-NRLO) - Mounting kit for Satchwell MB mixing valves (Type: MS-NRS) - Mounting kit for Satchwell MBF mixing valves (Type: MS-NRSF) Why Choose Belimo HT230-3 Rotary Actuator? High Functional Reliability: Automatically switches off when end stops are reached. Easy Installation: Simple direct mounting with only one screw and the option to freely select the mounting orientation in steps of 90°. Manual Override: Temporary gear train disengagement by pushing the rotary knob; permanent disengagement by pushing and simultaneously rotating the rotary knob clockwise 90°. For more information and to explore our range of Belimo products, visit our website at ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£181.00£126.70
-
Belimo 01DT-1LR Duct/Immersion Sensor Temperature
The Belimo 01DT-1LR Duct/Immersion Sensor is designed for precise temperature measurement in duct and pipe applications. Engineered with advanced technology, this sensor is ideal for HVAC systems, providing reliable data for efficient climate control. Its robust construction and IP65/NEMA 4X-rated enclosure ensure durability and resistance to harsh environmental conditions. Click here for the technical data PDF Parts Included: - Mounting Clip with Screws and Adhesive Foil: A-22D-A11 Type Overview: - Output Signal: NTC10k (10k2) - Probe Length: 300 mm - Probe Diameter: 6 mm Electrical Data: - Electrical Connection: Pluggable spring-loaded terminal block, max. 2.5 mm² - Cable Entry: Cable gland with strain relief, ø6...8 mm Functional Data: - Application: Air, Water - Output Signal: Passive temperature NTC10k (10k2) Measuring Data: - Measured Values: Temperature - Temperature Measuring Range: -50...150°C [-60...300°F] - Measuring Current: <2 mA @ 25°C [77°F] - Accuracy Temperature Passive: ±0.2°C @ 25°C [±0.35°F @ 77°F] - Time Constant τ (63%) in Water Pipe: Typical 7 s with thermowell brass, Typical 9 s with thermowell stainless steel - Time Constant τ (63%) in Air Duct: Typical 210 s @ 0 m/s, Typical 46 s @ 3 m/s Safety Data: - Protection Class IEC/EN: III, Protective Extra-Low Voltage (PELV) - Power Source UL: Class 2 Supply - Degree of Protection IEC/EN: IP65 - Degree of Protection NEMA/UL: NEMA 4X - EU Conformity: CE Marking - Certification IEC/EN: IEC/EN 60730-1 - Quality Standard: ISO 9001 - UL Approval: cULus acc. to UL60730-1A/-2-9, CAN/CSA E60730-1/-2-9 Environmental Conditions: - Type of Action: Type 1 - Rated Impulse Voltage Supply: 0.8 kV - Pollution Degree: 3 - Ambient Humidity: Max. 95% RH, non-condensing - Ambient Temperature: -35...50°C [-30...122°F] - Fluid Temperature: -50...150°C [-60...300°F] - Housing Surface Temperature: Max. 90°C [195°F] Materials: - Cable Gland Plug Adapter: PA66, black - Nut: PA6, black - Housing Cover: PC, orange - Bottom: PC, orange - Seal: NBR70, black, UV resistant - Probe Material: V4A (1.4404) Optional Accessories: - Mounting Plate S Housing: A-22D-A09 - Connection Adapter Flex Conduit, M20x1.5, for Cable Gland 1x 6 mm, Multipack 10 pcs.: A-22G-A01.1 - Mounting Flange for Sensor Probe 6 mm, up to max. 120°C [248°F], Plastic: A-22D-A03 - Mounting Flange for Sensor Probe 6 mm, up to max. 260°C, Brass: A-22D-A05 Recommended Accessories for Water Applications: - Thermowell Stainless Steel, 50 mm, G 1/2", SW27: A-22P-A06 - Thermowell Brass, 50 mm, R 1/2", SW22: A-22P-A18 - Syringe with Thermal Paste: A-22P-A44 - Compression Fitting, Stainless Steel, G 1/4" (external thread) for 6 mm, with Cutting Ring: A-22P-A45 Reliable Performance: Ensures accurate temperature measurement across a wide range of applications. Durable Construction: IP65/NEMA 4X rated enclosure provides excellent protection against environmental factors. Versatile Use: Suitable for both air and water applications with a variety of probe lengths to meet specific requirements. Compliance and Quality: Certified to meet international standards, ensuring quality and safety. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£39.90£27.93
-
Belimo A-22P-A20 Thermowell Pocket
This brass Belimo Thermowell pocket allows for a temperature probe to fit within., Click here for the technical data PDF Length:100 mm diameter: 9mm R 1/2", SW22 - Functional Data: - Application: Water, Water-glycol mixture - PN: 16 - Safety Data: - Quality Standard: ISO 9001 - Fluid Temperature: Up to max. 130°C - Materials: - Probe Material: Brass - Thermowell Material: - Turned part: CW614N (2.0401) - Pipe: CW508L (2.0321) - Pressure Screw: Polyamide (PA66/GF25) Product Features: - Brass construction ensures durability and reliability. - R 1/2" external thread and integrated compression fitting for quick and secure installation. - Suitable for a wide range of sensors and applications, particularly in water and water-glycol mixtures. - High flow velocity capabilities to meet diverse operational needs. - Compliance with ISO 9001 quality standards, ensuring top-notch performance. Included Parts: - Brass thermowell in specified lengths and diameters. - Integrated compression fitting for seamless sensor installation. Accessories: - Compatible with various immersion and cable sensors: 01DT.., 22DT.., 01CT.., 22CT... Notes: - Ensure compatibility with your system specifications before installation. - For maximum efficiency, consult the detailed technical data sheet. Why Choose Belimo A-22P-A22: - Quality Assurance: Certified to ISO 9001 standards. - Versatility: Applicable for various fluids and mixtures, including water and water-glycol. - Durability: Made from high-grade brass, ensuring long-term reliability and performance. - Easy Installation: Features an external thread and integrated fitting for quick setup. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£13.30£9.31
-
Belimo KG8 Ball Joint
Belimo Ball joint suitable for the KH8 damper crank arm, made with galvanised steel Belimo KH8 Crank Arm - https://ecospares.co.uk/products/belimo-kh8-damper-crank-arm
£15.00£10.50
-
Belimo CM230-L Damper Actuator
The Belimo CM230-L Damper Actuator is a robust and reliable solution for adjusting dampers in technical building installations. It is ideal for tradesmen and engineering companies seeking efficient and precise control of air dampers. Click here for the technical data PDF The Belimo CM230-L is engineered to provide exceptional performance in various HVAC applications. This actuator is suitable for air dampers up to approximately 0.4 m² and offers a range of control options to ensure optimal functionality. Key features - Nominal Voltage: AC 100-240 V - Control: Open/close, 3-point - Torque Motor: 2 Nm - Angle of Rotation: 0...287.5°, with a mechanical end stop option at 315° - Running Time: 75 s per 90° - Protection Class: IEC/EN II, UL II - Degree of Protection: IP54, NEMA 2 - Manual Override: Integrated with a magnet - Mounting: Universal shaft clamp (Ø6...12.7 mm) with anti-rotation clip Electrical Data - Nominal Voltage: AC 100-240 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 85-265 V - Power Consumption in Operation: 1.5 W - Power Consumption in Rest Position: 1 W - Power Consumption for Wire Sizing: 3 VA - Connection Supply/Control: Cable 1 m, 3x 0.75 mm² - Parallel Operation: Yes (consider performance data) Functional Data - Torque Motor: 2 Nm - Direction of Motion: Counter-clockwise rotation - Manual Override: With magnet - Angle of Rotation: 0...287.5°, endless without limitation - Sound Power Level: 35 dB(A) - Mechanical Interface: Universal shaft clamp (Ø6...12.7 mm) - Position Indication: Mechanical, pluggable Safety Data - Protection Class IEC/EN: II, reinforced insulation - Protection Class UL: II, reinforced insulation - Degree of Protection IEC/EN: IP54 - Degree of Protection NEMA/UL: NEMA 2 - Enclosure UL: Type 2 - EMC: CE according to 2014/30/EU - Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 - UL Approval: cULus according to UL60730-1A, UL60730-2-14, and CAN/CSA E60730-1 Environmental Data - Ambient Humidity Max.: 95% RH, non-condensing - Ambient Temperature: -30...50°C [-22...122°F] - Storage Temperature: -40...80°C [-40...176°F] - Servicing: Maintenance-free - Weight: 0.24 kg Available Accessories - Anti-rotation clip: Z-ARCM - Gear Train Disengagement Magnet: Z-MA - Position Indicator: Z-PICM - End Stop Clip: Z-ESCM - Shaft Extension: AV6-20 (170 mm Ø10 mm for damper shaft Ø6...16 mm) Why You Should Buy The Belimo CM230-L Damper Actuator stands out due to its high functional reliability, ease of installation, and robust performance in challenging environments. Its versatility in voltage range and control options makes it an ideal choice for various HVAC applications. The integrated manual override and adjustable angle of rotation provide additional flexibility and control, ensuring your systems operate smoothly and efficiently. For more information and to explore our range of Belimo products, visit our website at https://www.ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626.
£114.00£79.80
-
Belimo SRFA-S2-R Actuator for Rotary and Butterfly Valves
The Belimo SRFA-S2-R actuator is a high-performance rotary actuator designed for precise control of rotary valves and butterfly valves in heating, ventilation, and air-conditioning systems. Engineered for reliability and efficiency, this actuator is suitable for a wide range of applications, ensuring optimal performance and energy savings. Click here for the technical data PDF The SRFA-S2-R actuator is equipped with a universal power supply module, allowing it to operate with various AC and DC supply voltages. It features a robust torque motor and integrated auxiliary switches, making it ideal for demanding environments. This actuator provides reliable fail-safe functionality and manual override options for enhanced control and safety. Electrical Data - Nominal Voltage: AC 24...240 V / DC 24...125 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 19.2...264 V / DC 21.6...137.5 V - Power Consumption in Operation: 7 W - Power Consumption in Rest Position: 3.5 W - Power Consumption for Wire Sizing: 18 VA - Auxiliary Switch: 2x SPDT, 1x 10% / 1x 11...100% - Switching Capacity: 1 mA...3 A (0.5 A inductive), DC 5 V...AC 250 V - Connection Supply/Control: Cable 1 m, 2x 0.75 mm² - Connection Auxiliary Switch: Cable 1 m, 6x 0.75 mm² - Parallel Operation: Yes (note the performance data) Functional Data - Torque Motor: 20 Nm - Torque Fail-Safe: 20 Nm - Direction of Motion Fail-Safe: Selectable (Deenergised NC, valve closed or Deenergised NO, valve open) - Manual Override: Hand crank and locking switch - Running Time Motor: 75 s / 90° - Running Time Fail-Safe: <20 s @ -20...50°C / <60 s @ -30°C - Sound Power Level, Motor: 45 dB(A) - Position Indication: Mechanical - Service Life: Minimum 60,000 fail-safe positions Safety Data - Protection Class IEC/EN: II, reinforced insulation - Protection Class UL: II, reinforced insulation - Protection Class Auxiliary Switch IEC/EN: II, reinforced insulation - Degree of Protection IEC/EN: IP54 - Degree of Protection NEMA/UL: NEMA 2 - Enclosure UL Enclosure: Type 2 - EMC: CE according to 2014/30/EU - Low Voltage Directive: CE according to 2014/35/EU - Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 - UL Approval: cULus according to UL60730-1A, UL60730-2-14 and CAN/CSA E60730-1 Environmental Data - Type of Action: Type 1.AA.B - Rated Impulse Voltage Supply/Control: 4 kV - Rated Impulse Voltage Auxiliary Switch: 2.5 kV - Pollution Degree: 3 - Ambient Humidity Max.: 95% RH, non-condensing - Ambient Temperature: 0...50°C [32...122°F] - Storage Temperature: -40...80°C [-40...176°F] - Servicing: Maintenance-free Mechanical Data - Connection Flange: F03/F04/F05 - Weight: 2.3 kg Simple Direct Mounting: Easily mountable on rotary or butterfly valves with selectable mounting orientation in 90° steps. Manual Override: Operable manually via hand crank, with lockable positions. Adjustable Angle of Rotation: With mechanical end stops. High Functional Reliability: Overload protection with automatic stop at end positions. Flexible Signalling: Includes one fixed and one adjustable auxiliary switch for signaling 10% or 11...100% angle of rotation. Accessories - Form-Fit Adapters: Various sizes and types are available to match different spindle head geometries. (Refer to the PDF for specific adapter types and sizes) Notes - Caution: Ensure power supply voltage and proper installation by authorized specialists. - Disposal: Device contains electrical components and must not be disposed of as household waste. For more information and to explore our range of Belimo products, visit our website at https://www.ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626. Would you like a list of keywords for digital marketing, guiding content creation, PPC campaigns, and social media hashtags to improve product visibility and enhance ad reach on platforms like Google Ads? This list will include both long and short-tail keywords.
£486.00£340.20
-
Belimo KH8 Damper Crank Arm
Belimo Damper crank arm Slot width 8.2 mm, clamping range ø10...18 mm
£14.50£10.15
-
Belimo C215Q-F Zone valve (2-way)
Zone valve, 2-way, DN 15, Internal thread, Rp 1/2", PN 25, ps 1600 kPa, Kvs 4.8 m³/h, Fluid temperature 2...100°C [36...212°F] (with actuator 2...90°C) Click here for the technical data PDF The Belimo C215Q-F 2-way zone valve is expertly designed for closed cold and warm water systems. Ideal for shut-off functions and modulating controls on the water side of air-handling units and heating systems, this series offers reliable performance and ease of use. These valves ensure efficient and precise fluid flow control with snap-assembly actuators and various technical specifications. Functional Data Fluid Compatibility: Cold and warm water, water with glycol up to max. 50% vol. Fluid Temperature Range: 2...100°C (with actuator 2...90°C) Close-off Pressure (∆ps): 520 kPa Differential Pressure (Δpmax): 280 kPa Flow Characteristic: Equal percentage (VDI/VDE 2173), optimized in the opening range Leakage Rate: Air-bubble tight, leakage rate A (EN 12266-1) Angle of Rotation: 90° (Operating range 15...90°) Installation Orientation: Upright to horizontal Mechanical Data Valve Body Material: Brass Closing Element: Chrome-plated brass Spindle: Brass Spindle Seal: EPDM O-ring Seat: PTFE, O-ring EPDM Pipe Connection: Internal thread according to ISO 7-1 Snap-Assembly Actuator: Tool-free snap assembly for quick and easy installation. Flow Setting: Adjustable angle of rotation in 2.5° increments for precise flow control. Maintenance-Free: Both ball valves and rotary actuators require no maintenance. Flow Direction: Bidirectional flow capability. Accessories Spindle Extension (CQ ZCQ-E) Pipe Connectors: DN 15 Rp 1/2" (ZR2315) DN 20 Rp 3/4" (ZR2320) DN 25 Rp 1" (ZR2325) Installation Notes Permissible Orientation: Must not be installed in a hanging position. Water Quality Requirements: Adherence to VDI 2035 for long-term functionality. Servicing: Isolate the rotary actuator from the power supply before any service work. Ensure all components are cooled down, and system pressure is reduced to ambient level. Certification and Compliance Safety: Designed for stationary heating, ventilation, and air-conditioning systems. EMC and Certification: Conforms to relevant standards, ensuring safe and reliable operation. Belimo's C215Q-F zone valve offers superior control and reliability for your HVAC systems. Focusing on ease of installation, maintenance-free operation, and precision control, these valves are the ideal choice for professional tradesmen and engineering companies. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please contact us on 01772 284 626.
£35.00£24.50
-
Belimo NRFA Rotary Actuator with Fail-Safe for Ball Valves
The Belimo NRFA Rotary Actuator is a robust and reliable solution for controlling HVAC system ball valves. With its universal power supply and fail-safe functionality, this actuator ensures high performance and safety in various applications. The NRFA model is suitable for AC and DC voltage supplies, making it a versatile choice for modern engineering needs. Electrical Data: - Nominal Voltage: AC 24...240 V / DC 24...125 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 19.2...264 V / DC 21.6...137.5 V - Power Consumption in Operation: 6 W - Power Consumption in Rest Position: 2.5 W - Power Consumption for Wire Sizing: 9.5 VA - Connection Supply / Control: Cable 1 m, 2x 0.75 mm² - Parallel Operation: Yes (note the performance data) Functional Data: - Torque Motor: 10 Nm - Torque Fail-Safe: 10 Nm - Direction of Motion Fail-Safe: Deenergised NC, valve closed (A – AB = 0%) - Direction of Motion Note: For valves with L-bore (A – AB = 100%) - Manual Override: By means of hand crank and locking switch - Running Time Motor: 75 s / 90° - Running Time Fail-Safe: <20 s @ -20...50°C / <60 s @ -30°C - Sound Power Level, Motor: 45 dB(A) - Position Indication: Mechanical - Service Life: Min. 60'000 fail-safe positions Safety Data: - Protection Class IEC/EN: II, reinforced insulation - Protection Class UL: II, reinforced insulation - Degree of Protection IEC/EN: IP54 - Degree of Protection NEMA/UL: NEMA 2 - Enclosure UL: Enclosure Type 2 - EMC: CE according to 2014/30/EU - Low Voltage Directive: CE according to 2014/35/EU - Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 - UL Approval: cULus according to UL60730-1A, UL60730-2-14 and CAN/CSA E60730-1 - Type of Action: Type 1.AA - Rated Impulse Voltage Supply / Control: 4 kV - Pollution Degree: 3 - Ambient Humidity: Max. 95% RH, non-condensing - Ambient Temperature: -30...50°C [-22...122°F] - Storage Temperature: -40...80°C [-40...176°F] - Servicing: Maintenance-free - Weight: 2.0 kg Operating Mode: Equipped with a universal power supply module for AC and DC voltages. Ensures valve returns to fail-safe position by spring force upon power interruption. Simple Direct Mounting: Easy installation on ball valves with a single screw. Mounting orientation adjustable in 90° steps. Manual Override: Operable manually via hand crank with locking switch. Automatic or manual unlocking. Adjustable Angle of Rotation: Configurable with mechanical end stops. High Functional Reliability: Overload protection, no limit switches required, auto-stop at the end position. Accessories and Additional Parts: - Further documentation and accessories for water applications, ball valves, installation instructions, and project planning notes are available on our website. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626. Please let me know if you would like to include any emojis or if there are any additional details you'd like to emphasize.
£346.00£242.20
-
Belimo A-22P-A22 Brass Thermowell Pocket
Discover the premium quality and exceptional performance of the Belimo A-22P-A22 Brass Thermowell. Designed for ease of installation, this thermowell features an R 1/2" external thread and integrated compression fitting, making it ideal for immersion and cable sensors such as 01DT.., 22DT.., 01CT.., 22CT... Click here for the technical data PDF Technical Specifications: - Type Overview: - Thermowell Lengths: 150 mm - Thermowell Diameter: 9 mm - Max. Flow Velocity: 0.7 m/s to 26.6 m/s - Weight: 0.080 kg - Functional Data: - Application: Water, Water-glycol mixture - PN: 16 - Safety Data: - Quality Standard: ISO 9001 - Fluid Temperature: Up to max. 130°C - Materials: - Probe Material: Brass - Thermowell Material: - Turned part: CW614N (2.0401) - Pipe: CW508L (2.0321) - Pressure Screw: Polyamide (PA66/GF25) Product Features: - Brass construction ensures durability and reliability. - R 1/2" external thread and integrated compression fitting for quick and secure installation. - Suitable for a wide range of sensors and applications, particularly in water and water-glycol mixtures. - High flow velocity capabilities to meet diverse operational needs. - Compliance with ISO 9001 quality standards, ensuring top-notch performance. Included Parts: - Brass thermowell in specified lengths and diameters. - Integrated compression fitting for seamless sensor installation. Accessories: - Compatible with various immersion and cable sensors: 01DT.., 22DT.., 01CT.., 22CT... Notes: - Ensure compatibility with your system specifications before installation. - For maximum efficiency, consult the detailed technical data sheet. Why Choose Belimo A-22P-A22: - Quality Assurance: Certified to ISO 9001 standards. - Versatility: Applicable for various fluids and mixtures, including water and water-glycol. - Durability: Made from high-grade brass, ensuring long-term reliability and performance. - Easy Installation: Features an external thread and integrated fitting for quick setup. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£14.80£10.36
-
Belimo R3032-S3 Ball Valve (3-Way) (DN32)
The Belimo R3032-S3 3-Way Ball Valve is a versatile and reliable solution for precise fluid control in industrial applications. Designed with three ports for directional flow control, it offers minimal pressure drops, quick responsiveness, and impressive sealing capabilities. This valve is ideal for mixing or diverting fluids, making it suitable for chemical processing, water treatment, and food and beverage industries. Its robust construction ensures durability and safety in harsh environments. The electrical automation of the valve enhances operational efficiency with remote monitoring and control. Choose the Belimo R3032-S3 for dependable performance and seamless integration with industrial control systems. Click here for the technical data PDF Functional Data - Fluid: Cold and warm water, water with glycol up to max. 50% vol. - Fluid Temperature: -10...120°C [14...248°F] - Note: At a fluid temperature of -10...2°C, a spindle heater or a valve neck extension is recommended. The allowed fluid temperature can be limited depending on the type of actuator. Limitations can be found in the actuators' respective data sheets. - Close-off Pressure: 1400 kPa - Differential Pressure Δpmax: 1000 kPa - Note: 200 kPa for low-noise operation - Flow Bypass B – AB: Approx. 50% of Kvs value - Leakage Rate: - Port A – AB: Air-bubble tight, leakage rate A (EN 12266-1) - Bypass B – AB: Leakage class I (EN 1349 and EN 60534-4), max. 1% of the Kvs value - Angle of Rotation: 90° - Pipe Connection: Internal thread according to ISO 7-1 - Installation Orientation: Upright to horizontal (in relation to the stem) - Servicing: Maintenance-free - Air-bubble tight (control path A – AB) Materials - Valve Body: Nickel-plated brass body - Body Finish: Nickel-plated - Closing Element: Stainless steel - Spindle: Stainless steel - Spindle Seal: EPDM O-ring Electrical Accessories - Stem Heater DN 15...50 (20 W): ZR24-2 Mechanical Accessories - Valve Neck Extension for Ball Valve DN 15...50: ZR-EXT-01 - Pipe Connectors: - DN 15 Rp 1/2": ZR2315 - DN 20 Rp 3/4": ZR2320 - DN 25 Rp 1": ZR2325 - DN 32 Rp 1 1/4": ZR2332 - DN 40 Rp 1 1/2": ZR2340 - DN 50 Rp 2": ZR2350 Installation Notes - Permissible Installation Orientation: The ball valve can be installed upright to horizontal. It may not be installed in a hanging position (spindle pointing downwards). - Water Quality Requirements: Must adhere to VDI 2035 specifications. To ensure long-term functionality, valves must be kept free from particle debris. Installing a suitable strainer is recommended. - Servicing: Maintenance-free ball valves and rotary actuators. Isolate the rotary actuator from the power supply before service work. Switch off pumps in the piping system, close slide valves, and reduce system pressure to ambient levels. Return the system to service only after proper reassembly and refilling by trained personnel. - Flow Direction: Comply with the specified direction of flow indicated by an arrow on the housing to prevent valve damage. Ensure the ball is correctly positioned (marking on the spindle). Our website offers all Belimo products. For more information and to explore our range, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626.
£248.00£173.60
-
Belimo 22RTM-19-1 Room Sensor (CO₂ / Humidity / Temperature)
Introducing the Belimo 22RTM-19-1 Room Sensor, designed to precisely measure indoor temperature, humidity, and CO₂ levels. These sensors are perfect for integrating third-party controllers and feature MP-Bus communication and a 0...10 V output. Easily parametrised via NFC using the Belimo Assistant App, these sensors are a reliable addition to any HVAC system. Click here for the technical data PDF Electrical Data (See image of tech. sheet) - Nominal Voltage: AC/DC 24 V - Nominal Voltage Range: AC 19.2...28.8 V / DC 19.2...28.8 V - Power Consumption (AC): 1 VA - Power Consumption (DC): 0.5 W - Electrical Connection: Spring loaded terminal 0.25...1.5 mm², 23-15 AWG, copper conductors only - Cable Type (USA and Canada): CL2 or higher - Cable Entry: Back, Top, Bottom Functional Data (See image of tech. sheet) - Application: Air - Voltage Output: - 22RT-19-1: 1 x 0...5 V, 0...10 V, 2...10 V, min. resistance 5 kΩ - 22RTH-19-1: 2 x 0...5 V, 0...10 V, 2...10 V, min. resistance 5 kΩ - 22RTM-19-1: 3 x 0...5 V, 0...10 V, 2...10 V, min. resistance 5 kΩ - Output Signal Active Note: Output 0...5 V, 0...10 V (factory setting), 2...10 V selectable via NFC - Display: LED, used for CO₂ Traffic Light Function (TLF). Parametrisable and deactivatable via Belimo Assistant App. Measuring Data - Measured Values: - CO₂ - Relative Humidity - Dew Point - Temperature Specification CO₂ - Sensing Element Technology: Non-dispersive infrared (NDIR) dual channel - Measuring Range: Default setting: 0...2000 ppm - Accuracy: ±(50 ppm + 2% of measured value) - Long-Term Stability: ±20 ppm p.a. Specification Temperature - (See image of tech. sheet) - Measuring Range: 0...50°C [32...122°F] (default setting) - Accuracy Temperature Active: ±0.3°C @ 25°C [±0.5°F @ 77°F] - Long Term Stability: ±0.03°C p.a. @ 25°C [±0.05°F p.a. @ 77°F] Specification Humidity - (See image of tech. sheet) - Measuring Range: 0...100% RH (default setting) - Measuring Range Dew Point: -50...50°C [-60...120°F] (default setting) - Accuracy: ±2% between 0...90% RH @ 25°C - Long Term Stability: ±0.25% RH p.a. @ 25°C @ 50% RH Safety Data - Protection Class (IEC/EN): III, Safety Extra-Low Voltage (SELV) - Power Source (UL): Class 2 Supply - Degree of Protection (IEC/EN): IP30 - EU Conformity: CE Marking - Quality Standard: ISO 9001 - UL Approval: cULus according to UL60730-1, CAN/CSA E60730-1 - Type of Action: Type 1 - Rated Impulse Voltage Supply: 0.5 kV - Pollution Degree: 2 - Ambient Humidity Max: 95% RH, non-condensing - Ambient Temperature: 0...50°C [32...122°F] - Storage Temperature: -40...70°C [-40...160°F] Materials - Housing: PC, white, RAL 9003 - UL94V-0 Parts Included - Screws Accessories - Tools Description: - Belimo Assistant App: Smartphone app for easy commissioning, parametrising, and maintenance - Converter Bluetooth / NFC: ZIP-BT-NFC Notes - General Remarks: The sensor's accuracy can be influenced by the thermal characteristics of the wall on which it is mounted. It is designed for stationary heating, ventilation, and air-conditioning systems. - Application Notice for Humidity Sensors: The humidity sensor is highly sensitive and should not be exposed to aggressive substances like chlorine or ammonia, which can affect accuracy. Why You Should Buy Choosing Belimo's 22RM-19-1 adherence to strict safety standards makes them ideal for commercial applications, including hospitals and office buildings. Enhance your indoor air quality monitoring with Belimo and ensure a comfortable, safe environment for everyone. For more information and to explore our range of Belimo products, visit ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626.
£227.00£158.90
-
Belimo LRF24 Rotary Actuator with Fail-Safe for Ball Valves
The Belimo LRF24 rotary actuator is engineered for precision and reliability in controlling ball valves within HVAC systems. With its fail-safe feature, it ensures system protection even in power outages, providing seamless operation and peace of mind. Designed for direct mounting and ease of use, this actuator is ideal for tradesmen and engineering companies seeking durable and efficient control solutions. Click here for the technical data PDF Electrical Data: - Nominal Voltage: AC/DC 24 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 19.2...28.8 V / DC 21.6...28.8 V - Power Consumption in Operation: 5 W - Power Consumption in Rest Position: 2.5 W - Power Consumption for Wire Sizing: 7 VA - Connection Supply / Control: Cable 1 m, 2x 0.75 mm² - Parallel Operation: Yes (note the performance data) Functional Data: - Torque Motor: 4 Nm - Torque Fail-Safe: 4 Nm - Direction of Motion Fail-Safe: Deenergised NC, valve closed (A – AB = 0%) - Direction of Motion Note: For valves with L-bore (A – AB = 100%) - Manual Override: With hand crank, can be fixed in any position - Running Time Motor: 75 s / 90° - Running Time Fail-Safe: <20 s @ -20...50°C / <60 s @ -30°C - Sound Power Level, Motor: 50 dB(A) - Position Indication: Mechanical - Service Life: Minimum 60,000 fail-safe positions Safety Data: - Protection Class IEC/EN: III, Safety Extra-Low Voltage (SELV) - Degree of Protection IEC/EN: IP54 - EMC: CE according to 2014/30/EU - Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 - Type of Action: Type 1 - Rated Impulse Voltage Supply / Control: 0.8 kV - Pollution Degree: 3 - Ambient Humidity Max.: 95% RH, non-condensing - Ambient Temperature: -30...50°C [-22...122°F] - Storage Temperature: -40...80°C [-40...176°F] - Servicing: Maintenance-free - Weight: 1.5 kg Operating Mode: The actuator moves the valve to the operating position while simultaneously tensioning the return spring. The valve returns to the fail-safe position by spring force when the supply voltage is interrupted. Simple Direct Mounting: The actuator mounts directly onto the ball valve with a single screw. The mounting orientation can be selected in 90° steps, allowing for flexible installation. Manual Override: The valve can be manually operated and fixed in any position using a hand crank. Unlocking is performed manually or automatically by applying the operating voltage. High Functional Reliability: The actuator is overload protected, requires no limit switches, and stops automatically when the end stop is reached. Wire Colours: - 1 = Black - 2 = White Electrical Installation: Supply from an isolating transformer is required. Parallel connection of other actuators is possible, observing the performance data. Notes: - Only authorised specialists may carry out installation. - The device must not be used outside the specified field of application. - All locally valid regulations and requirements must be observed. Why You Should Buy the Belimo LRF24 Rotary Actuator The Belimo LRF24 rotary actuator stands out due to its reliable performance, ease of installation, and high functional reliability. Its fail-safe mechanism ensures that your HVAC systems remain protected and operational even during power outages. With minimal maintenance requirements and robust construction, the LRF24 is a valuable addition to any professional's toolkit, offering long-term efficiency and peace of mind. For More Information: Visit our website at https://www.ecospares.co.uk/collections/belimo for more information and to explore our range of Belimo products. If you need any assistance, please get in touch with us on 01772 284 626.
£278.00£194.60
-
Belimo C220Q-K Zone valve (2-way)
The C220Q-K Zone valve is 2-way, DN 15, Internal thread, Rp 1/2", PN 25, ps 1600 kPa, Kvs 4.8 m³/h, Fluid temperature 2...100°C [36...212°F] (with actuator 2...90°C) Click here for the technical data PDF The Belimo C220Q-K 2-way zone valve are expertly designed for closed cold and warm water systems. Ideal for shut-off functions and modulating controls on the water side of air-handling units and heating systems, this series offers reliable performance and ease of use. With snap-assembly actuators and a range of technical specifications, these valves ensure efficient and precise fluid flow control. Functional Data Fluid Compatibility: Cold and warm water, water with glycol up to max. 50% vol. Fluid Temperature Range: 2...100°C (with actuator 2...90°C) Close-off Pressure (∆ps): 520 kPa Differential Pressure (Δpmax): 280 kPa Flow Characteristic: Equal percentage (VDI/VDE 2173), optimized in the opening range Leakage Rate: Air-bubble tight, leakage rate A (EN 12266-1) Angle of Rotation: 90° (Operating range 15...90°) Installation Orientation: Upright to horizontal Mechanical Data Valve Body Material: Brass Closing Element: Chrome-plated brass Spindle: Brass Spindle Seal: EPDM O-ring Seat: PTFE, O-ring EPDM Pipe Connection: Internal thread according to ISO 7-1 Snap-Assembly Actuator: Tool-free snap assembly for quick and easy installation. Flow Setting: Adjustable angle of rotation in 2.5° increments for precise flow control. Maintenance-Free: Both ball valves and rotary actuators require no maintenance. Flow Direction: Bidirectional flow capability. Accessories Spindle Extension (CQ ZCQ-E) Pipe Connectors: DN 15 Rp 1/2" (ZR2315) DN 20 Rp 3/4" (ZR2320) DN 25 Rp 1" (ZR2325) Installation Notes Permissible Orientation: Must not be installed in a hanging position. Water Quality Requirements: Adherence to VDI 2035 for long-term functionality. Servicing: Isolate the rotary actuator from the power supply before any service work. Ensure all components are cooled down, and system pressure is reduced to ambient level. Certification and Compliance Safety: Designed for stationary heating, ventilation, and air-conditioning systems. EMC and Certification: Conforms to relevant standards, ensuring safe and reliable operation. Belimo's C220Q-K zone valve offers superior control and reliability for your HVAC systems. With a focus on ease of installation, maintenance-free operation, and precision control, these valves are the ideal choice for professional tradesmen and engineering companies. For more information and to explore our range of Belimo products, visit our website at (https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£42.20£29.54
-
Belimo GM24A-SR Modulating Damper Actuator
The Belimo GM24A-SR Modulating Damper Actuator is designed for precise adjustment of dampers in technical building installations, suitable for air damper sizes up to approximately 8 m². With a robust torque motor and efficient power consumption, it ensures reliable performance for HVAC systems. Click here for the technical data PDF Electrical Data: - Nominal Voltage: AC/DC 24 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 19.2...28.8 V / DC 19.2...28.8 V - Power Consumption in Operation: 4.5 W - Power Consumption in Rest Position: 2 W - Power Consumption for Wire Sizing: 6.5 VA - Connection Supply / Control: Cable 1 m, 4x 0.75 mm² - Parallel Operation: Yes (note the performance data) Functional Data: - Torque Motor: 40 Nm - Operating Range Y: 2...10 V - Input Impedance: 100 kΩ - Position Feedback U: 2...10 V - Position Feedback U Note: Max. 1 mA - Position Accuracy: ±5% - Direction of Motion Motor: Selectable with switch 0/1 - Direction of Motion Note: Y = 0 V: At switch position 0 (ccw rotation) / 1 (cw rotation) - Manual Override: With push-button, can be locked - Angle of Rotation: Max. 95° - Angle of Rotation Note: Can be limited on both sides with adjustable mechanical end stops - Running Time Motor: 150 s / 90° - Sound Power Level, Motor: 45 dB(A) - Mechanical Interface: Universal shaft clamp reversible 12...26.7 mm - Position Indication: Mechanical, pluggable Safety Data: - Protection Class IEC/EN: III, Safety Extra-Low Voltage (SELV) - Power Source UL: Class 2 Supply - Degree of Protection IEC/EN: IP54 - Degree of Protection NEMA/UL: NEMA 2 - Enclosure UL: Enclosure Type 2 - EMC: CE according to 2014/30/EU - Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 Environmental Data: - UL Approval: cULus according to UL60730-1A, UL60730-2-14 and CAN/CSA E60730-1 - Hygiene Test: According to VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low emission - Type of Action: Type 1 - Rated Impulse Voltage Supply / Control: 0.8 kV - Pollution Degree: 3 - Ambient Humidity Max.: 95% RH, non-condensing - Ambient Temperature: -30...50°C [-22...122°F] - Storage Temperature: -40...80°C [-40...176°F] - Servicing: Maintenance-free - Weight: 1.6 kg Operating Mode: The actuator connects with a standard control signal of 0...10 V and drives to the position defined by the control signal. Measuring voltage U serves for the electrical display of the damper position 0...100% and as control signal for other actuators. Simple Direct Mounting: Direct mounting on the damper shaft with a universal shaft clamp, equipped with an anti-rotation device to prevent rotation. Manual Override: Possible with push-button (gear train disengaged while pressed or locked). Adjustable Angle of Rotation: Mechanical end stops allow for adjustable angle. High Functional Reliability: Overload protection with no need for limit switches, automatically stops when end stop is reached. Electrical Accessories: - Auxiliary switch 1x SPDT add-on S1A - Auxiliary switch 2x SPDT add-on S2A - Feedback potentiometers (140 Ω, 1 kΩ, 10 kΩ) - Signal converter voltage/current Z-UIC - Positioners for various mounting options (SGA24, SGE24, SGF24, CRP24-B1) Mechanical Accessories: - Actuator arm for standard shaft clamp AH-GMA - Ball joint suitable for damper crank arm KH8 / KH10 KG10A - Damper crank arm KH10 - Anti-rotation mechanism Z-ARS230 - Mounting kit for linkage operation ZG-GMA - Baseplate extension for GM..A to GM.. Z-GMA - Position indicator Z-PI For more information and to explore our range of Belimo products, visit our website at https://www.ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£378.00£264.60
-
Belimo R3032-16-S3 Ball Valve (3-Way) (DN32)
The Belimo R3032-16-S3 3-Way Ball Valve is a versatile and reliable solution for precise fluid control in industrial applications. Designed with three ports for directional flow control, it offers minimal pressure drops, quick responsiveness, and impressive sealing capabilities. This valve is ideal for mixing or diverting fluids, making it suitable for chemical processing, water treatment, and food and beverage industries. Its robust construction ensures durability and safety in harsh environments. The electrical automation of the valve enhances operational efficiency with remote monitoring and control. Choose the Belimo R3032-16-S3 for dependable performance and seamless integration with industrial control systems. Click here for the technical data PDF Functional Data - Fluid: Cold and warm water, water with glycol up to max. 50% vol. - Fluid Temperature: -10...120°C [14...248°F] - Note: At a fluid temperature of -10...2°C, a spindle heater or a valve neck extension is recommended. The allowed fluid temperature can be limited depending on the type of actuator. Limitations can be found in the actuators' respective data sheets. - Close-off Pressure: 1400 kPa - Differential Pressure Δpmax: 1000 kPa - Note: 200 kPa for low-noise operation - Flow Bypass B – AB: Approx. 50% of Kvs value - Leakage Rate: - Port A – AB: Air-bubble tight, leakage rate A (EN 12266-1) - Bypass B – AB: Leakage class I (EN 1349 and EN 60534-4), max. 1% of the Kvs value - Angle of Rotation: 90° - Pipe Connection: Internal thread according to ISO 7-1 - Installation Orientation: Upright to horizontal (in relation to the stem) - Servicing: Maintenance-free - Air-bubble tight (control path A – AB) Materials - Valve Body: Nickel-plated brass body - Body Finish: Nickel-plated - Closing Element: Stainless steel - Spindle: Stainless steel - Spindle Seal: EPDM O-ring Electrical Accessories - Stem Heater DN 15...50 (20 W): ZR24-2 Mechanical Accessories - Valve Neck Extension for Ball Valve DN 15...50: ZR-EXT-01 - Pipe Connectors: - DN 15 Rp 1/2": ZR2315 - DN 20 Rp 3/4": ZR2320 - DN 25 Rp 1": ZR2325 - DN 32 Rp 1 1/4": ZR2332 - DN 40 Rp 1 1/2": ZR2340 - DN 50 Rp 2": ZR2350 Installation Notes - Permissible Installation Orientation: The ball valve can be installed upright to horizontal. It may not be installed in a hanging position (spindle pointing downwards). - Water Quality Requirements: Must adhere to VDI 2035 specifications. To ensure long-term functionality, valves must be kept free from particle debris. Installing a suitable strainer is recommended. - Servicing: Maintenance-free ball valves and rotary actuators. Isolate the rotary actuator from the power supply before service work. Switch off pumps in the piping system, close slide valves, and reduce system pressure to ambient levels. Return the system to service only after proper reassembly and refilling by trained personnel. - Flow Direction: Comply with the specified direction of flow indicated by an arrow on the housing to prevent valve damage. Ensure the ball is correctly positioned (marking on the spindle). Our website offers all Belimo products. For more information and to explore our range, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626.
£257.00£179.90
-
Belimo D665N Butterfly Valve (DN65)
The Belimo D6..N series butterfly valves are essential components in various industrial applications, and they are known for their cost-effectiveness, lightweight design, and efficient flow regulation. These quarter-turn rotational motion valves are ideal for controlling the flow through pipelines by quickly opening or closing with a simple 90-degree rotation. Widely used in pharmaceutical, chemical, and food industries, as well as in water flow control for dams and hydroelectric power plants, butterfly valves offer both control and protection functions. Their versatility and reliability make them a preferred choice for managing flow in numerous applications, ensuring optimal performance and safety. Click here for the technical data PDF Type Overview - D625N: DN 25, Kvmax 50 m³/h, Kvs 24 m³/h, PN 6/10/16, n(gl) 3.2 - D632N: DN 32, Kvmax 55 m³/h, Kvs 25 m³/h, PN 6/10/16, n(gl) 3.2 - D640N: DN 40, Kvmax 65 m³/h, Kvs 27 m³/h, PN 6/10/16, n(gl) 3.2 - D650N: DN 50, Kvmax 100 m³/h, Kvs 30 m³/h, PN 6/10/16, n(gl) 3.2 - D665N: DN 65, Kvmax 170 m³/h, Kvs 50 m³/h, PN 6/10/16, n(gl) 3.2 - D680N: DN 80, Kvmax 260 m³/h, Kvs 75 m³/h, PN 6/10/16, n(gl) 3.2 - D6100N: DN 100, Kvmax 520 m³/h, Kvs 150 m³/h, PN 6/10/16, n(gl) 3.2 - D6125N: DN 125, Kvmax 880 m³/h, Kvs 260 m³/h, PN 6/10/16, n(gl) 3.2 - D6150N: DN 150, Kvmax 1400 m³/h, Kvs 400 m³/h, PN 6/10/16, n(gl) 3.2 - D6350N: DN 350, Kvmax 10300 m³/h, Kvs 3010 m³/h, PN 10/16, n(gl) 3.2 - D6400N: DN 400, Kvmax 14200 m³/h, Kvs 4140 m³/h, PN 16, n(gl) 3.2 - D6450N: DN 450, Kvmax 18800 m³/h, Kvs 5490 m³/h, PN 16, n(gl) 3.2 - D6500N: DN 500, Kvmax 24100 m³/h, Kvs 7060 m³/h, PN 16, n(gl) 3.2 - D6600N: DN 600, Kvmax 37300 m³/h, Kvs 10900 m³/h, PN 16, n(gl) 3.2 - D6700N: DN 700, Kvmax 42800 m³/h, Kvs 11760 m³/h, PN 16, n(gl) 3.2 The types D6200N, D6250N, and D6300N have been replaced by D6200W, D6250W, and D6300W respectively. Functional Data - Fluid: Cold and warm water, water with glycol up to max. 50% vol. - Fluid Temperature: -10...120°C [14...248°F] - Flow Characteristic: - 0...60% opening angle: equal percentage (VDI/VDE 2173) - 0...100% opening angle: S-form - Leakage Rate: Tight, leakage rate A (EN 12266-1) - Angle of Rotation: 90° - Pipe Connection: Flange according to ISO 7005-2, EN 1092-2, PN6/10/16, AS Table E (DN 50...150), PN10/16, AS Table E (DN 350), PN16 (DN 400...600) - Installation Orientation: Upright to horizontal (in relation to the stem) - Servicing: Maintenance-free Materials - Valve Body: EN-GJS-400-15 (GGG 40) - Body Finish: Polyester powder coated - Closing Element: Stainless steel AISI 304 (1.4301) - Spindle: - Stainless steel AISI 420 (1.4021) (DN 25, 32, 40, 50, 65, 80, 100, 125, 150) - Stainless steel AISI 630 (1.4542) (DN 350, 400, 450, 500, 600, 700) - Spindle Seal: EPDM O-ring - Spindle Bearing: RPTFE - Seat: EPDM Operating Mode The butterfly valve is opened or closed completely by an open/close rotary actuator. A commercially available controller connects continuous rotary actuators and move the valve to any desired position. The valve disk made of stainless steel is pressed into the soft-sealing EPDM seat by a rotary movement, ensuring a tight seal with minimal pressure loss when open, maximising the Kv value. Manual Override - Manual Throttling/Isolation: With lever or worm gear (see accessories) - With lever (DN 25…150): Adjustable in 10 ratchet steps with position indication (0 = 0°; 9 = 90°) - With worm gear (DN 25...700): Steplessly adjustable (self-locking) with position indication Accessories - Electrical: Stem heater flange F05 (30 W) ZR24-F05 - Mechanical: - Worm gear for butterfly valves DN 25...100 ZD6N-S100 - Lever for butterfly valves DN 25...100 ZD6N-H100 - Worm gear for butterfly valves DN 125...300 ZD6N-S150 - Lever for butterfly valves DN 125...150 ZD6N-H150 - Worm gear for butterfly valves DN 350 ZD6N-S350 - Worm gear for butterfly valves DN 400 ZD6N-S400 - Worm gear for butterfly valves DN 450 ZD6N-S450 - Worm gear for butterfly valves DN 500 ZD6N-S500 - Worm gear for butterfly valves DN 600 ZD6N-S600 - Worm gear for butterfly valves DN 700 ZD6N-S700 Flow Setting - Characteristic Curve: Equal percentage characteristic curve between 0...60% opening angle. Linear characteristic curve can be set using the Belimo Assistant App. Dimensions Refer to the dimensional drawings for precise measurements in the included images. For more information and to explore our range of Belimo products, visit our website at [ecospares.co.uk/collections/belimo](https://ecospares.co.uk/collections/belimo). If you need any assistance, please get in touch with us on 01772 284 626.
£172.00£120.40
-
Belimo R3025-S2 Ball Valve (3-Way) (DN25)
For Closed Cold and Warm Water Systems, this is Ideal for switching functions and 2-point controls on the water side of air-handling units and heating systems. Click here for the technical data PDF Functional Data - Fluid: Cold and warm water, water with glycol up to max. 50% vol. - Fluid Temperature: -10...120°C [14...248°F] - Note: At a fluid temperature of -10...2°C, a spindle heater or a valve neck extension is recommended. The allowed fluid temperature can be limited depending on the type of actuator. Limitations can be found in the actuators' respective data sheets. - Close-off Pressure: 1400 kPa - Differential Pressure Δpmax: 1000 kPa - Note: 200 kPa for low-noise operation - Flow Bypass B – AB: Approx. 50% of Kvs value - Leakage Rate: - Port A – AB: Air-bubble tight, leakage rate A (EN 12266-1) - Bypass B – AB: Leakage class I (EN 1349 and EN 60534-4), max. 1% of the Kvs value - Angle of Rotation: 90° - Pipe Connection: Internal thread according to ISO 7-1 - Installation Orientation: Upright to horizontal (in relation to the stem) - Servicing: Maintenance-free - Air-bubble tight (control path A – AB) Materials - Valve Body: Nickel-plated brass body - Body Finish: Nickel-plated - Closing Element: Stainless steel - Spindle: Stainless steel - Spindle Seal: EPDM O-ring Electrical Accessories - Stem Heater DN 15...50 (20 W): ZR24-2 Mechanical Accessories - Valve Neck Extension for Ball Valve DN 15...50: ZR-EXT-01 - Pipe Connectors: - DN 15 Rp 1/2": ZR2315 - DN 20 Rp 3/4": ZR2320 - DN 25 Rp 1": ZR2325 - DN 32 Rp 1 1/4": ZR2332 - DN 40 Rp 1 1/2": ZR2340 - DN 50 Rp 2": ZR2350 Installation Notes - Permissible Installation Orientation: The ball valve can be installed upright to horizontal. It may not be installed in a hanging position (spindle pointing downwards). - Water Quality Requirements: Must adhere to VDI 2035 specifications. To ensure long-term functionality, valves must be kept free from particle debris. Installing a suitable strainer is recommended. - Servicing: Maintenance-free ball valves and rotary actuators. Isolate the rotary actuator from the power supply before service work. Switch off pumps in the piping system, close slide valves, and ensure system pressure is reduced to ambient levels. Return the system to service only after proper reassembly and refilling by trained personnel. - Flow Direction: Comply with the specified direction of flow indicated by an arrow on the housing to prevent valve damage. Ensure the ball is correctly positioned (marking on the spindle). Our website offers all Belimo products. For more information and to explore our range, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please call us on 01772 284 626.
£171.00£119.70
-
Belimo ZSFV-09 Adapter
Belimo Form fit adapter square, 9x9x55 mm (LxWxH), for SRF..-R
£53.20£37.24
-
Belimo MS-NRE Mounting kit
This Belimo Mounting kit is for mixing valves with 12mm round shaft
£11.90£8.33
-
Belimo 22RTH-19-1 Room Sensor (CO₂ / Humidity / Temperature)
Introducing the Belimo 22RTH-19-1 Room Sensor, designed to measure indoor temperature, humidity, and CO₂ levels precisely. These sensors are perfect for integration with third-party controllers and feature MP-Bus communication and a 0...10 V output. Easily parametrised via NFC using the Belimo Assistant App, these sensors are a reliable addition to any HVAC system. Click here for the technical data PDF Electrical Data - Nominal Voltage: AC/DC 24 V - Nominal Voltage Range: AC 19.2...28.8 V / DC 19.2...28.8 V - Power Consumption (AC): 1 VA - Power Consumption (DC): 0.5 W - Electrical Connection: Spring loaded terminal 0.25...1.5 mm², 23-15 AWG, copper conductors only - Cable Type (USA and Canada): CL2 or higher - Cable Entry: Back, Top, Bottom Functional Data - Application: Air - Voltage Output: - 22RT-19-1: 1 x 0...5 V, 0...10 V, 2...10 V, min. resistance 5 kΩ - 22RTH-19-1: 2 x 0...5 V, 0...10 V, 2...10 V, min. resistance 5 kΩ - 22RTM-19-1: 3 x 0...5 V, 0...10 V, 2...10 V, min. resistance 5 kΩ - Output Signal Active Note: Output 0...5 V, 0...10 V (factory setting), 2...10 V selectable via NFC - Display: LED, used for CO₂ Traffic Light Function (TLF). Parametrisable and deactivatable via Belimo Assistant App. Measuring Data - Measured Values: - CO₂ - Relative Humidity - Dew Point - Temperature Specification CO₂ - Sensing Element Technology: Non-dispersive infrared (NDIR) dual channel - Measuring Range: Default setting: 0...2000 ppm - Accuracy: ±(50 ppm + 2% of measured value) - Long-Term Stability: ±20 ppm p.a. Specification Temperature - Measuring Range: 0...50°C [32...122°F] (default setting) - Accuracy Temperature Active: ±0.3°C @ 25°C [±0.5°F @ 77°F] - Long Term Stability: ±0.03°C p.a. @ 25°C [±0.05°F p.a. @ 77°F] Specification Humidity - Measuring Range: 0...100% RH (default setting) - Measuring Range Dew Point: -50...50°C [-60...120°F] (default setting) - Accuracy: ±2% between 0...90% RH @ 25°C - Long Term Stability: ±0.25% RH p.a. @ 25°C @ 50% RH Safety Data - Protection Class (IEC/EN): III, Safety Extra-Low Voltage (SELV) - Power Source (UL): Class 2 Supply - Degree of Protection (IEC/EN): IP30 - EU Conformity: CE Marking - Quality Standard: ISO 9001 - UL Approval: cULus according to UL60730-1, CAN/CSA E60730-1 - Type of Action: Type 1 - Rated Impulse Voltage Supply: 0.5 kV - Pollution Degree: 2 - Ambient Humidity Max: 95% RH, non-condensing - Ambient Temperature: 0...50°C [32...122°F] - Storage Temperature: -40...70°C [-40...160°F] Materials - Housing: PC, white, RAL 9003 - UL94V-0 Parts Included - Screws Accessories - Tools Description: - Belimo Assistant App: Smartphone app for easy commissioning, parametrising, and maintenance - Converter Bluetooth / NFC: ZIP-BT-NFC Notes - General Remarks: The sensor's accuracy can be influenced by the thermal characteristics of the wall on which it is mounted. It is designed for use in stationary heating, ventilation, and air-conditioning systems. - Application Notice for Humidity Sensors: The humidity sensor is highly sensitive and should not be exposed to aggressive substances like chlorine or ammonia, which can affect accuracy. Why You Should Buy Choosing Belimo's 22RT-19-1 series ensures you are getting top-notch accuracy and reliability for your HVAC systems. With advanced features like dual channel CO₂ sensing and NFC parametrisation, these sensors are designed for optimal performance and ease of use. Their robust design and adherence to strict safety standards make them ideal for commercial applications, including hospitals and office buildings. Enhance your indoor air quality monitoring with Belimo and ensure a comfortable, safe environment for everyone. For more information and to explore our range of Belimo products, visit our website at ecospares.co.uk/collections/belimo. If you need any assistance, please contact us on 01772 284 626.
£110.00£77.00
-
Belimo R3025-10-S2 (3-Way) Control Valve
This Belimo 3-Way Characterised Control Valve is designed for closed cold and warm water systems. It is ideal for modulating control of air-handling and heating systems on the water side, ensuring efficient and precise flow regulation. Click here for the technical data PDF Type Overview - R3025-10-S2 - DN25 - RP 1" - 10m³/h - PN40 - 3.2n(gl) - 100 Sv min. Functional Data: - Fluid: Cold and warm water, water with glycol up to 50% vol. - Fluid Temperature: -10°C to 120°C [14°F to 248°F] - Close-off Pressure: 1400 kPa - Differential Pressure (Δpmax): 350 kPa - Flow Characteristics: - Control Path A – AB: Equal percentage (VDI/VDE 2173) - Bypass B – AB: Linear (VDI/VDE 2173) - Leakage Rate: - Control Path A – AB: Air-bubble tight, leakage rate A (EN 12266-1) - Bypass B – AB: Leakage class I (EN 1349 and EN 60534-4) 1-2% of Kvs value Mechanical Data: - Valve Body: Nickel-plated brass - Closing Element: Stainless steel - Spindle: Stainless steel - Spindle Seal: EPDM O-ring - Seat: PTFE, O-ring EPDM - Characterised Disc: ETFE (DN 15, 20, 25, 32, 40, 50) or stainless steel (DN 40, 50) Operational Data: - Angle of Rotation: 90° (Control path A – AB: 15-90°, Bypass B – AB: 15-70°) - Pipe Connection: Internal thread (ISO 7-1) - Installation Orientation: Upright to horizontal - Servicing: Maintenance-free Accessories: - Electrical: - Stem heater DN 15-50 (20 W) ZR24-2 - Mechanical: - Valve neck extension for ball valve DN 15-50 ZR-EXT-01 - Pipe connectors for ball valves (various sizes) Installation Notes: - The ball valve can be installed upright to horizontal but not in a hanging position. - Water quality must meet VDI 2035 standards. Installation of a suitable strainer is recommended. - Ensure the correct flow direction as specified by the housing arrow. Why You Should Buy: Efficiency: Ensures precise flow control for optimal heating and air-handling performance. Durability: Made with high-quality materials for long-term use. Versatility: Suitable for a variety of closed water systems. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£182.00£127.40
-
Belimo A-22P-A06 Thermowell (G 1/2 inch)
Introducing the high-quality Stainless Steel Thermowell, designed for seamless integration with immersion and cable temperature sensors, including models 01DT.., 22DT.., 01CT.., and 22CT.. This thermowell offers superior durability and precision, making it ideal for various applications in various industrial environments. Click here for the technical data PDF Parts Included - Stainless Steel Thermowell - Integrated Compression Fitting - G 1/2" External Thread Crafted from premium stainless steel, this thermowell ensures long-lasting performance and reliability. Its G 1/2" external thread and integrated compression fitting simplify installation, ensuring a secure and leak-proof connection. Material Composition: - Probe Material: Stainless Steel - Turned Part: V4A (1.4404) - Pipe: V4A (1.4571) - Pressure Screw: Polyamide (PA66/GF25) Application: Suitable for water and water-glycol mixture applications. - Pressure Rating: PN 40 - Temperature Range: Capable of handling fluid temperatures up to a maximum of 200°C. - Quality Standard: ISO 9001 certified. | Type | Length | Diameter | Max. Flow | Weight | | A-22P-A06 | 50 mm | 9 mm | 29.5 m/s | 0.065 kg | | A-22P-A08 | 100 mm | 9 mm | 13.6 m/s | 0.075 kg | | A-22P-A10 | 150 mm | 9 mm | 8.7 m/s | 0.085 kg | | A-22P-A12 | 200 mm | 9 mm | 5.4 m/s | 0.095 kg | | A-22P-A29 | 250 mm | 9 mm | 4.5 m/s | 0.10 kg | | A-22P-A14 | 300 mm | 9 mm | 2.4 m/s | 0.11 kg | | A-22P-A16 | 450 mm | 9 mm | 1.0 m/s | 0.14 kg | Why You Should Buy This Thermowell Durability: Constructed from high-grade stainless steel, this thermowell offers exceptional resistance to corrosion and wear, ensuring long-term reliability. Easy Installation: The G 1/2" external thread and integrated compression fitting make installation straightforward and secure, reducing downtime and maintenance efforts. Versatility: Designed for use with a variety of immersion and cable temperature sensors, making it a versatile choice for different industrial applications. High-Performance: With a pressure rating of PN 40 and a fluid temperature capacity of up to 200°C, this thermowell meets the demands of rigorous industrial environments. Compliance: Meets ISO 9001 standards, ensuring high quality and performance. Accessories - Optional temperature sensors compatible with models 01DT.., 22DT.., 01CT.., 22CT.. Notes - Ensure compatibility with your existing sensors and systems before installation. - For optimal performance, regular maintenance and checks are recommended. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626
£25.80£18.06
-
Belimo NM230A Damper Actuator
The Belimo NM230A Damper Actuator is engineered to control air dampers in technical building installations precisely. Designed for high performance and reliability, it accommodates air damper sizes up to 2 m² and offers a torque of 10 Nm. This actuator is ideal for applications requiring exact control and easy integration. Click here for the technical data PDF Electrical Data - Nominal Voltage: AC 100...240 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 85...265 V - Power Consumption in Operation: 2.5 W - Power Consumption in Rest Position: 0.6 W - Power Consumption for Wire Sizing: 5.5 VA - Connection Supply / Control: Cable 1 m, 3x 0.75 mm² - Parallel Operation: Yes (performance data to be considered) Functional Data - Torque Motor: 10 Nm - Direction of Motion Motor: Selectable with switch 0 (ccw rotation) / 1 (cw rotation) - Manual Override: Push-button, can be locked - Angle of Rotation: Max. 95°, can be limited on both sides with adjustable mechanical end stops - Running Time Motor: 150 s / 90° - Sound Power Level: 35 dB(A) - Mechanical Interface: Universal shaft clamp 8...26.7 mm - Position Indication: Mechanical, pluggable Safety Data - Protection Class IEC/EN: II, reinforced insulation - Protection Class UL: II, reinforced insulation - Degree of Protection IEC/EN: IP54 - Degree of Protection NEMA/UL: NEMA 2 - Enclosure UL: Enclosure Type 2 - EMC: CE according to 2014/30/EU - Low Voltage Directive: CE according to 2014/35/EU - Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 - UL Approval: cULus according to UL60730-1A, UL60730-2-14, and CAN/CSA E60730-1 - Hygiene Test: According to VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low-emission - Type of Action: Type 1 - Rated Impulse Voltage Supply / Control: 2.5 kV - Pollution Degree: 3 Environmental Data - Ambient Humidity: Max. 95% RH, non-condensing - Ambient Temperature: -30...50°C [-22...122°F] - Storage Temperature: -40...80°C [-40...176°F] - Servicing: Maintenance-free - Weight: 0.72 kg Simple Direct Mounting: Universal shaft clamp with an anti-rotation device for secure installation. Manual Override: Easily engage with a push-button that can be locked. Adjustable Angle of Rotation: Mechanical end stops allow for precise control. High Functional Reliability: Overload protected, requires no limit switches, and stops automatically at end stops. Additional Accessories Electrical Accessories: - Auxiliary switch 1x SPDT add-on: S1A - Auxiliary switch 2x SPDT add-on: S2A - Feedback potentiometer 140 Ω add-on: P140A - Feedback potentiometer 1 kΩ add-on: P1000A - Feedback potentiometer 10 kΩ add-on: P10000A Mechanical Accessories: - Actuator arm for standard shaft clamp (one-sided): AH-25 - Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm: AV8-25 - Ball joint suitable for damper crank arm KH8: KG8 - Ball joint suitable for damper crank arm KH8 / KH10: KG10A - Damper crank arm Slot width 8.2 mm, clamping range ø10...18 mm: KH8 - Shaft clamp one-sided, clamping range ø8...26 mm with insert, Multipack 20 pcs.: K-ENMA - Shaft clamp reversible, clamping range ø8...20 mm: K-NA - Form fit insert 8x8 mm, Multipack 20 pcs.: ZF8-NMA - Form fit insert 10x10 mm, Multipack 20 pcs.: ZF10-NSA - Form fit insert 12x12 mm, Multipack 20 pcs.: ZF12-NSA - Form fit insert 15x15 mm, Multipack 20 pcs.: ZF15-NSA - Form fit insert 16x16 mm, Multipack 20 pcs.: ZF16-NSA - Mounting kit for linkage operation for flat installation: ZG-NMA - Anti-rotation mechanism 180 mm, Multipack 20 pcs.: Z-ARS180 - Baseplate extension for NM..A to NM..: Z-NMA - Position indicator, Multipack 20 pcs.: Z-PI The Belimo NM230A Damper Actuator is a top choice for HVAC professionals seeking reliability, efficiency, and ease of installation. Its robust design, versatile control options, and maintenance-free operation make it a trusted component in any technical building installation. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£164.00£114.80
-
Belimo LM24A-S Damper Actuator
The Belimo LM24A-S damper actuator is a robust and reliable solution designed for adjusting dampers in technical building installations. Ideal for air dampers up to approximately 1 m², this actuator ensures precise control and high performance in HVAC applications. With a torque of 5 Nm and versatile control options, it meets various operational requirements with ease. Click here for the technical data PDF Electrical Data - Nominal Voltage: AC/DC 24 V - Nominal Voltage Frequency: 50/60 Hz - Nominal Voltage Range: AC 19.2...28.8 V / DC 19.2...28.8 V - Power Consumption in Operation: 1 W - Power Consumption in Rest Position: 0.2 W - Power Consumption for Wire Sizing: 1.5 VA - Connection Supply / Control: Cable 1 m, 3x 0.75 mm² - Parallel Operation: Yes (note the performance data) - Auxiliary Switch: 1x SPDT, 0...100% - Switching Capacity of Auxiliary Switch: 1 mA...3 A (0.5 A inductive), DC 5 V...AC 250 V Functional Data - Torque Motor: 5 Nm - Direction of Motion Motor: Selectable with switch 0 (ccw rotation) / 1 (cw rotation) - Manual Override: With push-button, can be locked - Angle of Rotation: Max. 95° - Running Time Motor: 150 s / 90° - Sound Power Level, Motor: 35 dB(A) - Mechanical Interface: Universal shaft clamp 6...20 mm - Position Indication: Mechanical, pluggable Safety Data - Protection Class IEC/EN: III, Safety Extra-Low Voltage (SELV) - Power Source UL: Class 2 Supply - Protection Class Auxiliary Switch IEC/EN: II, reinforced insulation - Degree of Protection IEC/EN: IP54 - Degree of Protection NEMA/UL: NEMA 2 - Enclosure UL Enclosure: Type 2 - EMC: CE according to 2014/30/EU - Low Voltage Directive: CE according to 2014/35/EU - Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-14 - UL Approval: cULus according to UL60730-1A, UL60730-2-14, and CAN/CSA E60730-1 - Hygiene Test: According to VDI 6022 Part 1 / SWKI VA 104-01, cleanable and disinfectable, low emission Environmental Data - Type of Action: Type 1.B - Rated Impulse Voltage Supply / Control: 0.8 kV - Rated Impulse Voltage Auxiliary Switch: 2.5 kV - Pollution Degree: 3 - Ambient Humidity Max.: 95% RH, non-condensing - Ambient Temperature: -30...50°C [-22...122°F] - Storage Temperature: -40...80°C [-40...176°F] - Servicing: Maintenance-free - Weight: 0.54 kg Product Features - Simple Direct Mounting: Universal shaft clamp for easy installation on damper shafts. - Manual Override: Push-button allows manual operation when needed. - Adjustable Angle of Rotation: Mechanical end stops for precise angle settings. - High Functional Reliability: Overload protection with automatic stop at end position. - Flexible Signalling: Adjustable auxiliary switch for versatile signal configurations. Additional accesories: - Electrical Accessories: - Auxiliary Switch 1x SPDT Add-on (S1A) - Auxiliary Switch 2x SPDT Add-on (S2A) - Feedback Potentiometer 140 Ω Add-on (P140A) - Feedback Potentiometer 1 kΩ Add-on (P1000A) - Feedback Potentiometer 10 kΩ Add-on (P10000A) - Mechanical Accessories: - Shaft Extension 170 mm ø10 mm for damper shaft ø6...16 mm (AV6-20) - Shaft Clamp one-sided, clamping range ø6...20 mm, Multipack 20 pcs. (K-ELA) - Anti-rotation Mechanism 180 mm, Multipack 20 pcs. (Z-ARS180) - Form Fit Inserts in various sizes (ZF8-LMA, ZF10-LMA, ZF12-LMA, etc.) - Position Indicator, Multipack 20 pcs. (Z-PI) Why You Should Buy The Belimo LM24A-S damper actuator is an essential component for any HVAC system, offering precise control, reliability, and ease of installation. Its versatile features and high-quality construction ensure optimal performance, making it a valuable investment for any technical building installation. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£147.00£102.90
You have seen 48 out of 103 products