Trianco
WES Control Board - for ORANGE Screen
This control board is suitable for the following boilers with an ORANGE screen: WES E-Compact Trianco Greenflame WES Slim Please order the model you require from the drop down menu *Wood Energy Solutions (WES) The control board for a biomass boiler, also known as a Programmable Circuit Board (PCB), is an essential digital component designed to ensure the optimal performance of your boiler. This vital part is responsible for maintaining the correct temperature, pressure, and current flow, enabling all electronic components within the boiler to function efficiently and safely. By synchronizing the various elements of your boiler, the PCB ensures continuous and uninterrupted operation. Features Temperature Regulation: Maintains precise control over the boiler's temperature for consistent heating performance. Pressure Monitoring: Ensures safe and optimal water and air pressure levels within the boiler system. Current Flow Control: Manages the electrical flow to various components, preventing overloads and ensuring safety. Component Synchronisation: Integrates and synchronizes all electronic parts, promoting smooth and efficient operation. Fault Detection: Identifies potential issues early, allowing for timely maintenance and repairs. Why You Should Buy A well-functioning PCB is critical for the reliability and efficiency of your biomass boiler. Understanding its intricacies helps in identifying and addressing faults promptly, preventing costly repairs and extending the lifespan of your boiler system. Investing in a high-quality control board ensures your home remains warm and comfortable with minimal disruption. Understanding the Boiler PCB Often referred to as the brain of the boiler, the PCB controls, protects, and monitors various aspects of the boiler’s operation. It processes information from sensors, timers, and thermostats, sending signals to control different parts of the system. Regular maintenance and timely repairs of the PCB are essential to avoid issues like erratic thermostat behavior, power outages, and continuous operation without heating. Indications of a Malfunctioning PCB Intermittent Display Panel Operation: Erratic functioning of the display panel could indicate PCB issues. Total Power Outage: A complete loss of power to the boiler often points to PCB faults. Error Codes: Specific error codes on the boiler’s display panel can signify PCB problems. Unusual Noises: Clicking, buzzing, or humming sounds from the boiler may relate to electrical components on the PCB. Burning Smell: Overheating components can emit a burning smell, indicating serious PCB issues. Understanding Boiler Components Fan: Expels combustion gases through the flue. Pump: Circulates heated water to radiators. Heat Exchanger: Transfers heat from fuel to water. Gas Valve: Controls gas flow to the burner. Thermistor: A temperature sensor that helps regulate heat output. NTC Thermistor: Similar to a thermistor but with resistance that decreases with temperature increases. Ensure your biomass boiler operates at peak efficiency by maintaining its PCB and addressing any faults promptly. A reliable control board not only enhances performance but also contributes to a safe and comfortable home environment.
£428.12 - £491.47
-
WES Control Board - for BLUE Screen
This control board is suitable for the following boilers with a BLUE screen: WES E-Compact Trianco Greenflame WES Slim Please select the model you wish to order from the drop down menu *Wood Energy Solutions (WES) The control board for a biomass boiler, also known as a Programmable Circuit Board (PCB), is an essential digital component designed to ensure the optimal performance of your boiler. This vital part is responsible for maintaining the correct temperature, pressure, and current flow, enabling all electronic components within the boiler to function efficiently and safely. By synchronizing the various elements of your boiler, the PCB ensures continuous and uninterrupted operation. Features Temperature Regulation: Maintains precise control over the boiler's temperature for consistent heating performance. Pressure Monitoring: Ensures safe and optimal water and air pressure levels within the boiler system. Current Flow Control: Manages the electrical flow to various components, preventing overloads and ensuring safety. Component Synchronisation: Integrates and synchronizes all electronic parts, promoting smooth and efficient operation. Fault Detection: Identifies potential issues early, allowing for timely maintenance and repairs. Why You Should Buy A well-functioning PCB is critical for the reliability and efficiency of your biomass boiler. Understanding its intricacies helps in identifying and addressing faults promptly, preventing costly repairs and extending the lifespan of your boiler system. Investing in a high-quality control board ensures your home remains warm and comfortable with minimal disruption. Understanding the Boiler PCB Often referred to as the brain of the boiler, the PCB controls, protects, and monitors various aspects of the boiler’s operation. It processes information from sensors, timers, and thermostats, sending signals to control different parts of the system. Regular maintenance and timely repairs of the PCB are essential to avoid issues like erratic thermostat behavior, power outages, and continuous operation without heating. Indications of a Malfunctioning PCB Intermittent Display Panel Operation: Erratic functioning of the display panel could indicate PCB issues. Total Power Outage: A complete loss of power to the boiler often points to PCB faults. Error Codes: Specific error codes on the boiler’s display panel can signify PCB problems. Unusual Noises: Clicking, buzzing, or humming sounds from the boiler may relate to electrical components on the PCB. Burning Smell: Overheating components can emit a burning smell, indicating serious PCB issues. Understanding Boiler Components Fan: Expels combustion gases through the flue. Pump: Circulates heated water to radiators. Heat Exchanger: Transfers heat from fuel to water. Gas Valve: Controls gas flow to the burner. Thermistor: A temperature sensor that helps regulate heat output. NTC Thermistor: Similar to a thermistor but with resistance that decreases with temperature increases. Ensure your biomass boiler operates at peak efficiency by maintaining its PCB and addressing any faults promptly. A reliable control board not only enhances performance but also contributes to a safe and comfortable home environment.
£428.12 - £491.47
-
Lambda Module for Trianco/WES boilers
This is the lambda module—PSYSM01000006—most commonly found on Trianco and WES (Wood Energy Solutions) boilers to control the lambda sensor. This module pairs with the Lambda Sensor (401030). The Lambda Sensor for biomass boilers is a critical component designed to optimise fuel consumption and enhance boiler efficiency. This sensor ensures optimal combustion by accurately measuring the oxygen content in the exhaust gases, reducing fuel consumption by up to 20%. This precise control over the combustion process improves heating efficiency and minimizes CO2 emissions, contributing to a cleaner environment. Features Accurate Oxygen Measurement: Measures the percentage of molecular oxygen (O2) in exhaust gases to determine fuel mixture quality. Fuel Consumption Reduction: Optimizes boiler operation to reduce fuel consumption by up to 20%. Enhanced Combustion Efficiency: Ensures optimal combustion of fuel used for heating purposes. CO2 Emissions Reduction: Minimizes carbon dioxide emissions by maintaining an ideal fuel mixture. Durable Construction: Built to withstand the harsh conditions within the boiler system. Easy Integration: Designed for seamless installation into existing biomass boiler systems. Why You Should Buy Investing in a Lambda Sensor for your biomass boiler is essential for achieving superior fuel efficiency and reducing environmental impact. By ensuring optimal combustion, this sensor helps lower fuel consumption and CO2 emissions, providing significant cost savings and contributing to a greener future. Understanding the Lambda Sensor The Lambda Sensor functions by measuring the oxygen content in the flue gases. This information is used to adjust the boiler parameters, ensuring that the fuel mixture is neither too lean nor too rich. A lean mixture has too much oxygen, while a rich mixture has too little. Maintaining the correct balance is crucial for efficient combustion and fuel savings. Key Functionalities Oxygen Level Monitoring: Continuously measures the oxygen levels in the exhaust gases to ensure optimal fuel mixture. Fuel Efficiency: Reduces fuel consumption by up to 20% through precise combustion control. Emission Control: Lowers CO2 emissions by maintaining efficient fuel combustion. System Optimization: Adjusts boiler parameters to achieve the best possible combustion conditions. Robust Design: Engineered to endure the rigorous environment within a biomass boiler system. Potential Issues with a Faulty Lambda Sensor A malfunctioning Lambda Sensor can lead to several problems: Increased Fuel Consumption: Inefficient combustion can result in higher fuel usage, increasing operational costs. Higher CO2 Emissions: Poor combustion leads to elevated carbon dioxide emissions, negatively impacting the environment. Blocked Heat Exchanger: Inefficient combustion can cause soot and other residues to accumulate, potentially blocking the heat exchanger and reducing boiler efficiency. By incorporating a Lambda Sensor into your biomass boiler system, you ensure that your boiler operates at peak efficiency, with reduced fuel consumption and lower emissions. This sensor is an indispensable tool for maintaining an efficient and environmentally friendly heating system.
£224.00£186.67
-
£142.03£113.01
-
Pellet Vacuum Motor 7.2"
This pellet vacuum motor is commonly used within the 'cyclomatic' for the following vacuum systems. If unsure, please get in touch for advice. WES E-Compact Bioflame Trianco Greenflame Froling 230v/ 50Hz 1200W 7.2" Part no. 400331 The Pellet Vacuum Motor for biomass boilers is an advanced system designed to seamlessly and automatically transport fuel from the main storage tank to the boiler tank. This efficient suction engine ensures a continuous supply of pellets, integrating two lines to manage fuel and air flow, enhancing both performance and safety. Features Automatic Fuel Transfer: Continuously moves pellets from the main storage tank to the boiler tank for uninterrupted operation. Integrated System: Features a built-in dispenser and safety systems for reliable and secure operation. Dual-Line Functionality: Utilizes two lines—one for transporting fuel and one for returning air—to optimize efficiency and reduce dust. Turbine Technology: Employs a turbine (screw conveyor) for efficient pellet transport. Dust Reduction: Closed circuit design minimizes dust in the boiler room, promoting a cleaner environment. Robust Construction: Durable materials and design ensure long-lasting performance in demanding conditions. Easy Integration: Compatible with various biomass boiler systems for straightforward installation. Why You Should Buy Investing in a Pellet Vacuum Motor is essential for maintaining the efficiency and cleanliness of your biomass boiler system. This motor automates fuel delivery, ensuring your boiler operates smoothly and continuously, while its closed-circuit design significantly reduces dust and maintenance requirements. Understanding the Pellet Vacuum Motor The Pellet Vacuum Motor operates by continuously transferring pellets from the storage tank to the boiler tank. This automatic system includes two integrated lines: one for moving fuel with a turbine and one for returning air to the boiler room. This dual-line functionality not only optimizes fuel delivery but also helps maintain a clean and dust-free environment. Key Functionalities Continuous Fuel Supply: Automatically transfers pellets to the boiler tank, ensuring uninterrupted boiler operation. Integrated Dispenser: Includes a built-in dispenser for precise fuel management. Efficient Transport: Uses turbine technology for effective and reliable fuel transfer. Air Return Line: Reduces dust by returning air to the boiler room, maintaining a cleaner environment. Safety Systems: Equipped with safety mechanisms to ensure secure and reliable operation. Durability: Designed to withstand the rigorous conditions of biomass boiler systems. Enhancing Boiler Performance and Cleanliness The Pellet Vacuum Motor is a vital component for any biomass boiler system, ensuring continuous fuel supply and reducing maintenance efforts. Its advanced design and integrated safety features enhance boiler performance, while the dual-line system minimizes dust, contributing to a cleaner and more efficient boiler room environment.
£352.05£276.36
-
15kW Exhaust fan
This 15kW Exhaust Fan is for 1st Generation E-Compact / Bioflame and Greenflame 15kW boilers. It is typically found on boilers built pre-2013. Product no. 700214 The exhaust fan is essential for maintaining optimal combustion system operation. Also known as an Induced Draft (ID) fan, this exhaust fan is meticulously designed to create negative air pressure, effectively removing flue gases from the combustion chamber. This fan is designed to meet the rigorous demands of modern combustion systems, ensuring they operate smoothly and safely. What is the primary function of an exhaust fan in a combustion chamber? An exhaust fan, or Induced Draft (ID) fan, removes flue gases from the combustion chamber by creating negative pressure, ensuring efficient and safe operation. How does an ID fan improve boiler efficiency? By removing flue gases, the ID fan prevents buildup that can hinder combustion, thereby improving the overall efficiency and performance of the boiler. What maintenance does the exhaust fan require? Regular inspection and cleaning are recommended to ensure optimal performance and longevity. The fan is designed for easy maintenance. How energy-efficient is this exhaust fan? Our exhaust fan is optimised for energy efficiency, helping to reduce operational costs while maintaining high performance.
£106.87
-
15kW baffle set
This baffle set is suitable for only the 15kW classic style, outdoor model of the WES boiler (Wood Energy Solutions). Product no. 100022 This steel baffle set is essential for controlling heat flow from the burning area through the boiler up to the flue, ensuring maximum heat retention and transfer to the boiler. By incorporating this essential component into your biomass boiler system, you can achieve better energy efficiency, lower fuel costs, and a more reliable heating solution. How It Works The baffle consists of a steel plate strategically placed to control and direct the flow of heat. As the heat travels from the burning area through the boiler, the baffle slows it down, allowing more time for the heat to radiate from the tubes to the boiler. This process ensures that the maximum amount of heat is transferred to the water jacket, maintaining the boiler’s temperature and improving its overall efficiency. Key Features - Efficient Heat Management: Our baffle ensures that heat is retained within the boiler for as long as possible, maximising the contact between the water jacket and the heat produced by combustion. - Durable Construction: Made from robust steel plates, this baffle is built to withstand high temperatures and prolonged use, providing long-lasting performance. - Improved Boiler Efficiency: By controlling the heat flow, the baffle helps maintain the boiler’s temperature, enhancing overall efficiency and reducing fuel consumption. Versatile Compatibility: This baffle is suitable for WES e-compact 15kW, and Trianco Greenflame 15kW Installation and Maintenance Installing the biomass boiler baffle is straightforward and can be done with basic tools by a qualified engineer. Regular maintenance involves periodic inspections to ensure the baffle remains in good condition and free from damage. Proper maintenance will extend the baffle's life and maintain your boiler's efficiency.
£101.31