Products
1.5μF Motor capacitor
This replacement capacitor is suitable for the 15W auger motor found on Trianco, WoodCo, Woodpecker and WES boilers but is suitable for multiple applications. 1.5μF Two spade connections 50/60hz 450VAC A motor capacitor is a crucial electrical component that stores and releases energy to boost the current in single-phase motors. This boost increases motor torque, ensuring efficient and reliable operation. What is a motor capacitor? A motor capacitor is an electrical component that stores and releases energy to boost the current in single-phase motors, increasing motor torque. How does a motor capacitor improve motor efficiency? A capacitor ensures complete combustion of fuel by providing an energy boost to the motor’s windings, leading to better energy output and reduced fuel consumption.
£13.45£3.49
-
10-25kW Baffle
This baffle is suitable for the following boilers: Trianco Greenflame ECO 10kW Trianco Greenflame ECO 15kW Trianco Greenflame ECO 25kW EkoGren 10-25kW Product Code: 100911 This steel baffle is essential for controlling heat flow from the burning area through the boiler up to the flue, ensuring maximum heat retention and transfer to the boiler. By incorporating this essential component into your biomass boiler system, you can achieve better energy efficiency, lower fuel costs, and a more reliable heating solution. How It Works The baffle consists of a rolled of steel plate strategically placed to control and direct the flow of heat. As the heat travels from the burning area through the boiler, the baffle slows it down, allowing more time for the heat to radiate from the tubes to the boiler. This process ensures that the maximum amount of heat is transferred to the water jacket, maintaining the boiler’s temperature and improving its overall efficiency. Key Features - Efficient Heat Management: Our baffle ensures that heat is retained within the boiler for as long as possible, maximising the contact between the water jacket and the heat produced by combustion. - Durable Construction: Made from robust steel plates, this baffle is built to withstand high temperatures and prolonged use, providing long-lasting performance. - Improved Boiler Efficiency: By controlling the heat flow, the baffle helps maintain the boiler’s temperature, enhancing overall efficiency and reducing fuel consumption. Versatile Compatibility: This baffle is suitable for Trianco Greenflame ECO 10-25kW and EKOGREN biomass boilers. Installation and Maintenance Installing the biomass boiler baffle is straightforward and can be done with basic tools by a qualified engineer. Regular maintenance involves periodic inspections to ensure the baffle remains in good condition and free from damage. Proper maintenance will extend the baffle's life and maintain your boiler's efficiency.
£243.80
-
10-40kW chain
This stoker chain is suitable for the Trianco Greenflame ECO 10-40kW This chain plays a pivotal role in connecting the stoker motor to the stoker auger, usually via a rotary valve, which acts as a fire break from the pellet hopper. Designed to be a weak point in the event of a jam, these chains protect more valuable equipment by breaking when necessary. Specifications of Biomass Boiler Stoker Chains Understanding the specifications of biomass boiler stoker chains is key to ensuring you select the right one for your system. Here are the critical details: - Material: High-strength steel, resistant to high temperatures and corrosion - Length: Customizable to fit various boiler systems - Load Capacity: Engineered to break under specific loads to protect the system - Compatibility: Suitable for use with various biomass boilers and stoker motors - Durability: Designed for long-lasting performance even under continuous use Importance of Biomass Boiler Stoker Chains Biomass boiler stoker chains are not just any component; they are vital for the smooth operation and safety of your boiler system. Here’s why: Safety Mechanism The primary function of the stoker chain is to act as a safeguard. In the event of a jam in the system, the chain is designed to break, preventing damage to more valuable equipment like the stoker motor and auger. This safety feature is crucial for avoiding costly repairs and downtime. Efficient Operation By ensuring a secure connection between the stoker motor and auger, stoker chains facilitate the efficient transfer of wood pellets from the hopper to the combustion chamber. This efficiency is essential for maintaining consistent heat output and fuel consumption. Compatibility and Versatility Our biomass boiler stoker chains are designed to be compatible with a wide range of biomass boilers, making them suitable for both commercial and domestic applications. Whether you are servicing a large industrial boiler or a smaller domestic stove, our stoker chains provide the reliability you need. Maintenance and Replacement Regular inspection and maintenance of biomass boiler stoker chains are essential to ensure ongoing performance and safety. Here are some tips: - Routine Checks: Inspect the chain for signs of wear and tear, such as rust or deformation. - Lubrication: Apply appropriate lubricants to keep the chain functioning smoothly. - Timely Replacement: Replace the stoker chain if any damage is detected to avoid system malfunctions. Precision Engineering Each chain is precisely engineered to break under specific load conditions, providing a reliable safety mechanism for your boiler system. This precision helps protect your investment in the long run. Customer Support We offer comprehensive customer support to assist you in selecting the right stoker chain for your specific boiler model and to provide guidance on installation and maintenance. Frequently Asked Questions What is the purpose of a biomass boiler stoker chain? The stoker chain connects the stoker motor to the stoker auger, acting as a safety mechanism by breaking under specific conditions to prevent damage to more valuable equipment. How often should biomass boiler stoker chains be inspected? Regular inspections should be carried out every few months to check for wear and tear, rust, or deformation. What materials are biomass boiler stoker chains made from? Stoker chains are made from high-strength steel, which is resistant to high temperatures and corrosion, ensuring durability and long-lasting performance. How do I know if my stoker chain needs to be replaced? If you notice signs of wear, rust, or deformation during routine inspections, it's time to replace the stoker chain to maintain the efficiency and safety of your boiler system. Where can I purchase biomass boiler stoker chains? You can purchase high-quality biomass boiler stoker chains directly from us, where we offer a variety of lengths and specifications to fit your needs.
£26.11
-
12-Pin Multicore Plug
This multicore plug is found at the rear of the burner which supplies various boiler componants such as the safety actuator, ignition element, combustion fan, photocell, stoker motor etc. The 12-Pin Multicore Plug. Consists of Grey outer sleeve, 12-pin insert and cable gland and is suitable on the following models: Trianco Greenflame 55, 85, 100, 125, 150, 199, 215 WOODCO 55, 85, 100, 125, 150, 215 WES E-Compact 55, 85, 100, 125, 150, 199, 215 Product Code: 300205 This 12-pin (Male) Connector Plug is specifically designed to facilitate seamless power and communication between the main control board and the key components servicing the burner, delivering power and data transmission with precision. Key Features - High-Quality Construction: Made from durable materials to withstand high temperatures and harsh operating conditions. - 12 Pin Configuration: Ensures robust connectivity and communication between control units and burner components. - Easy Installation: User-friendly design for quick and secure fitting. - Compatibility: Suitable for a wide range of biomass boilers and stoves, including both commercial and domestic models. - Reliable Performance: Guarantees consistent power delivery and data transfer for optimal boiler function. Installation Guide 1. Preparation: Ensure the boiler is powered down and all safety precautions are followed. 2. Connector Inspection: Check the connector for any damage or debris. 3. Termination: correctly insert the wires and terminate them 4. Alignment: Align the 12 pins of the male connector with the corresponding female socket. 5. Testing: Power up the boiler and test the connection to ensure it is functioning correctly.
£114.90
-
15-18kW Baffle
Baffle plate suitable for: Trianco Greenflame 15-18 WES SLIM 18kW Part no. 100419 This steel baffle is essential for controlling heat flow from the burning area through the boiler up to the flue, ensuring maximum heat retention and transfer to the boiler. By incorporating this essential component into your biomass boiler system, you can achieve better energy efficiency, lower fuel costs, and a more reliable heating solution. How It Works The baffle consists of a steel plate strategically placed to control and direct the flow of heat. As the heat travels from the burning area through the boiler, the baffle slows it down, allowing more time for the heat to radiate from the tubes to the boiler. This process ensures that the maximum amount of heat is transferred to the water jacket, maintaining the boiler’s temperature and improving its overall efficiency. Key Features - Efficient Heat Management: Our baffle ensures that heat is retained within the boiler for as long as possible, maximising the contact between the water jacket and the heat produced by combustion. - Durable Construction: Made from robust steel plates, this baffle is built to withstand high temperatures and prolonged use, providing long-lasting performance. - Improved Boiler Efficiency: By controlling the heat flow, the baffle helps maintain the boiler’s temperature, enhancing overall efficiency and reducing fuel consumption. Versatile Compatibility: This baffle is suitable for WES 18kW SLIM, Trianco 18kW SLIM Installation and Maintenance Installing the biomass boiler baffle is straightforward and can be done with basic tools by a qualified engineer. Regular maintenance involves periodic inspections to ensure the baffle remains in good condition and free from damage. Proper maintenance will extend the baffle's life and maintain your boiler's efficiency.
£86.46
-
15-18kW Slim Burner Pot
This burner pot is suitable for the WES 15-18kW SLIM models Part no. 100508 The burner grate is crafted from high-temperature steel, ensuring unparalleled durability and performance. This essential component is designed to facilitate efficient fuel burning by providing a robust base, allowing optimal access to the ignition element and ensuring fresh oxygen supply through strategically placed air holes. Key Features - High-Temperature Steel Construction: Made from premium high-temperature steel, our burner grate withstands extreme conditions, offering long-lasting durability and reliability. - Optimal Airflow Design: Equipped with precision-engineered air holes, the grate ensures consistent oxygen flow, enhancing combustion efficiency. - Easy Maintenance: Designed for straightforward installation and removal, facilitating hassle-free maintenance and cleaning.
£224.00£200.98
-
150/199/215 Igniter Holder Cone
This ignition cone is suitable for the following boilers: WOODCO 215 WES E-Compact 150, 199, 215kW Trianco Greenflame 150, 199kW Bioflame 199 Product no. 100061 150/199/215 Ignitor Holder Cone: Durable High-Temperature Steel for Optimal Boiler Performance Product Overview The 150/199/215 Igniter Holder Cone is an essential component designed to enhance the efficiency and longevity of your biomass boiler. Serving as a protective shroud, this ignitor holder cone channels the hot air generated by the boiler’s heating element directly towards the fuel. This ensures optimal ignition and combustion while safeguarding the heating element from damage. Features and Benefits High-Temperature Steel Construction: Crafted from high-temperature steel, the 150/199/215 Ignitor Holder Cone is built to withstand extreme conditions within biomass boilers. This material not only ensures durability but also enhances the overall efficiency of the heating process. Enhanced Boiler Efficiency By directing the hot air produced by the boiler’s heating element precisely towards the fuel, this ignitor holder cone optimises the combustion process. This leads to more efficient fuel usage, better heat output, and overall improved boiler performance. Protection for Heating Elements One of the key functions of the ignitor holder cone is to shield the boiler’s heating element from direct exposure to intense heat. This protection significantly reduces wear and tear on the element, extending its lifespan and reducing the frequency of maintenance and replacements.
£104.19
-
15kW baffle set
This baffle set is suitable for only the 15kW classic style, outdoor model of the WES boiler (Wood Energy Solutions). Product no. 100022 This steel baffle set is essential for controlling heat flow from the burning area through the boiler up to the flue, ensuring maximum heat retention and transfer to the boiler. By incorporating this essential component into your biomass boiler system, you can achieve better energy efficiency, lower fuel costs, and a more reliable heating solution. How It Works The baffle consists of a steel plate strategically placed to control and direct the flow of heat. As the heat travels from the burning area through the boiler, the baffle slows it down, allowing more time for the heat to radiate from the tubes to the boiler. This process ensures that the maximum amount of heat is transferred to the water jacket, maintaining the boiler’s temperature and improving its overall efficiency. Key Features - Efficient Heat Management: Our baffle ensures that heat is retained within the boiler for as long as possible, maximising the contact between the water jacket and the heat produced by combustion. - Durable Construction: Made from robust steel plates, this baffle is built to withstand high temperatures and prolonged use, providing long-lasting performance. - Improved Boiler Efficiency: By controlling the heat flow, the baffle helps maintain the boiler’s temperature, enhancing overall efficiency and reducing fuel consumption. Versatile Compatibility: This baffle is suitable for WES e-compact 15kW, and Trianco Greenflame 15kW Installation and Maintenance Installing the biomass boiler baffle is straightforward and can be done with basic tools by a qualified engineer. Regular maintenance involves periodic inspections to ensure the baffle remains in good condition and free from damage. Proper maintenance will extend the baffle's life and maintain your boiler's efficiency.
£101.31
-
15kW Exhaust fan
This 15kW Exhaust Fan is for 1st Generation E-Compact / Bioflame and Greenflame 15kW boilers. It is typically found on boilers built pre-2013. Product no. 700214 The exhaust fan is essential for maintaining optimal combustion system operation. Also known as an Induced Draft (ID) fan, this exhaust fan is meticulously designed to create negative air pressure, effectively removing flue gases from the combustion chamber. This fan is designed to meet the rigorous demands of modern combustion systems, ensuring they operate smoothly and safely. What is the primary function of an exhaust fan in a combustion chamber? An exhaust fan, or Induced Draft (ID) fan, removes flue gases from the combustion chamber by creating negative pressure, ensuring efficient and safe operation. How does an ID fan improve boiler efficiency? By removing flue gases, the ID fan prevents buildup that can hinder combustion, thereby improving the overall efficiency and performance of the boiler. What maintenance does the exhaust fan require? Regular inspection and cleaning are recommended to ensure optimal performance and longevity. The fan is designed for easy maintenance. How energy-efficient is this exhaust fan? Our exhaust fan is optimised for energy efficiency, helping to reduce operational costs while maintaining high performance.
£106.87
-
1600W Metabo heat gun
This 1600W Metabo heat gun is suitable for the Trianco Greenflame ECO range. The Metabo H16-500 heat gun has a powerful motor with optimum device cooling with two heating and three blower levels. The ergonomic design and rubber-coated handle provides ideal handling and a safe stationary application due to large non-slip floor space.Ideal for many applications including:- Dust-free removal of all metal and wood varnished coats.- Drying fresh varnished coats and filler compounds.- Thawing frozen water pipes etc.- Crimping cable ends.- Repairing welding tents, boats and other similar applications.High service life due to easy-to-clean air filter.Specifications:Air volume: 240 / 450 l/min.Air temperature: 300 / 500 ° C.Rated input power: 1.600 Watt.Weight (without power cable): 700 g. Product code ES10030
£44.97
-
18kW SLIM door fibre board
WES 18kW SLIM door fibreboard also suitable for the Trianco Greenflame 18 SLIM and Bioflame 18 SLIM. Part no. 700051 This high-quality fibre board is specifically designed to fit inside the door of your biomass boiler, providing superior insulation to the combustion chamber and preventing heat from escaping. Constructed from durable materials, this fibre board ensures long-lasting performance even under high temperatures, making it an essential component for maintaining optimal boiler functionality. Features: Heat Proof: Engineered to withstand extreme temperatures, ensuring that your boiler retains heat efficiently. Durable Construction: Made from high-quality materials that offer longevity and reliability, reducing the need for frequent replacements. Perfect Fit: Custom-designed for the 18kW SLIM biomass boiler door, ensuring a snug and secure fit. Efficient Insulation: Provides excellent thermal insulation, helping to maintain consistent combustion chamber temperatures and improve overall boiler efficiency. Easy Installation: Simple to install, allowing for quick and hassle-free maintenance of your biomass boiler. This fibre board not only helps in reducing heat loss but also contributes to the overall durability of your boiler. With its easy installation and robust construction, you can ensure that your boiler operates at peak efficiency, leading to potential cost savings on fuel and maintenance.
£23.54
-
199 / 215 Burner Diffuser ring
This diffuser ring is suitable for the following boilers: Trianco Greenflame 199 WES E-Compact 199 WOODCO 215 Product Code: 400239 The diffuser ring is crafted from high-temperature steel, ensuring unparalleled durability and performance. This essential component is designed to facilitate efficient fuel burning by providing fresh oxygen supply through strategically placed air holes for the secondary burn of the fuel. Key Features - High-Temperature Steel Construction: Made from premium high-temperature steel, our burner grate withstands extreme conditions, offering long-lasting durability and reliability. - Optimal Airflow Design: Equipped with precision-engineered air holes, the grate ensures consistent oxygen flow, enhancing combustion efficiency. - Easy Maintenance: Designed for straightforward installation and removal, facilitating hassle-free maintenance and cleaning.
£1,043.15
-
199/215 De-Ash Bevelled Insulation Board
This long vermiculite insulation board is situated in the lower combustion chamber, for the de-ash system. Please note: This item is heavy and large and may require a pallet for delivery. Suitable for: Woodco 215 WES E-Compact 199kW Trianco Greenflame 199kW Product number: 700068 This high-quality fibre board is specifically designed to fit inside the combustion chamber of biomass boiler, along the route of de-ashing, providing superior insulation to the combustion chamber and preventing heat from escaping. Constructed from durable materials, this fibre board ensures long-lasting performance even under high temperatures, making it an essential component for maintaining optimal boiler functionality. Features: Heat Proof: Engineered to withstand extreme temperatures, ensuring that your boiler retains heat efficiently. Durable Construction: Made from high-quality materials that offer longevity and reliability, reducing the need for frequent replacements. Perfect Fit: Custom-designed for your biomass boiler, ensuring a snug and secure fit. Efficient Insulation: Provides excellent thermal insulation, helping to maintain consistent combustion chamber temperatures and improve overall boiler efficiency. Easy Installation: Simple to install, allowing for quick and hassle-free maintenance of your biomass boiler. This fibre board not only helps in reducing heat loss but also contributes to the overall durability of your boiler. With its easy installation and robust construction, you can ensure that your boiler operates at peak efficiency, leading to potential cost savings on fuel and maintenance.
£135.65
-
199kW Combustion Chamber Ceramic Fibre Wool (per metre)
25 x 610mm and sold per meter length.Approx 3m required for 199kW Combustion Chamber. Product Overview:This fibre wool is a high-quality solution for extreme temperature resistance and energy efficiency. Engineered to meet the demands of high-temperature environments, it excels in both performance and durability, making it the perfect choice for industrial and commercial applications. Ideal for insulating furnaces, heating equipment, and pipeline linings, it provides robust protection against heat and enhances operational efficiency. Key Features: High-Temperature Resistance: With remarkable fire-resistant capabilities, this fibre wool withstands even the most intense heat, ensuring a stable and safe environment. Low Thermal Conductivity & Heat Capacity: This material keeps heat in check, minimizing energy loss and maintaining insulation integrity for prolonged periods. Good Fiber Elasticity: Its excellent elasticity allows for easy application and long-term performance without losing shape or effectiveness. Strong Seismic Performance: Built to endure physical shocks and vibrations, making it suitable for high-activity industrial settings. Easy to Use: Convenient to install, it simplifies insulation projects without compromising on protection or durability. Versatile Applications: Industrial Furnaces & Heating Equipment: Perfect for insulating the interiors of furnaces and similar equipment, ensuring high thermal efficiency. Pipeline & Wall Lining Insulation: Ideal for applications in pipelines, providing essential insulation to maintain temperature stability. Furnace Doors & Seals: Excellent choice for furnace doors, lids, and roofs, offering effective heat sealing and minimizing heat leakage. Why You Should Buy: Invest in a reliable, durable, and high-performing insulation solution with the Combustion Chamber Ceramic Fibre Wool. Designed for resilience in demanding environments, it not only enhances safety but also helps reduce energy costs through superior insulation. Its versatility across various applications makes it an invaluable asset for industrial, commercial, and residential fire protection and insulation needs.
£28.94
-
25-28kW Baffle set
This baffle set is suitable for: Trianco Greenflame 25 WES E-Compact 28kW Bioflame 28 Woodco E-Compact 28 'S' This product comes as a pair - Part no. 100551 This steel baffle set is essential for controlling heat flow from the burning area through the boiler up to the flue, ensuring maximum heat retention and transfer to the boiler. By incorporating this essential component into your biomass boiler system, you can achieve better energy efficiency, lower fuel costs, and a more reliable heating solution. How It Works The baffle consists of a steel plate strategically placed to control and direct the flow of heat. As the heat travels from the burning area through the boiler, the baffle slows it down, allowing more time for the heat to radiate from the tubes to the boiler. This process ensures that the maximum amount of heat is transferred to the water jacket, maintaining the boiler’s temperature and improving its overall efficiency. Key Features - Efficient Heat Management: Our baffle ensures that heat is retained within the boiler for as long as possible, maximising the contact between the water jacket and the heat produced by combustion. - Durable Construction: Made from robust steel plates, this baffle is built to withstand high temperatures and prolonged use, providing long-lasting performance. - Improved Boiler Efficiency: By controlling the heat flow, the baffle helps maintain the boiler’s temperature, enhancing overall efficiency and reducing fuel consumption. Versatile Compatibility: This baffle is suitable for WES e-compact 28kW, and Trianco Greenflame 28kW Installation and Maintenance Installing the biomass boiler baffle is straightforward and can be done with basic tools by a qualified engineer. Regular maintenance involves periodic inspections to ensure the baffle remains in good condition and free from damage. Proper maintenance will extend the baffle's life and maintain your boiler's efficiency.
£193.79£184.79
-
25-28kW Boiler Door Fibre Board
The product is suitable for the following: Trianco Greenflame 25/28 WES E-Compact 28 Woodco E-Compact 28 'S' Bioflame 28 Turco 28 Part no. 700055 This high-quality fibre board is specifically designed to fit inside the door of your biomass boiler, providing superior insulation to the combustion chamber and preventing heat from escaping. Constructed from durable materials, this fibre board ensures long-lasting performance even under high temperatures, making it an essential component for maintaining optimal boiler functionality. Features: Heat Proof: Engineered to withstand extreme temperatures, ensuring that your boiler retains heat efficiently. Durable Construction: Made from high-quality materials that offer longevity and reliability, reducing the need for frequent replacements. Perfect Fit: Custom-designed for the 25/28kW biomass boiler door, ensuring a snug and secure fit. Efficient Insulation: Provides excellent thermal insulation, helping to maintain consistent combustion chamber temperatures and improve overall boiler efficiency. Easy Installation: Simple to install, allowing for quick and hassle-free maintenance of your biomass boiler. This fibre board not only helps in reducing heat loss but also contributes to the overall durability of your boiler. With its easy installation and robust construction, you can ensure that your boiler operates at peak efficiency, leading to potential cost savings on fuel and maintenance.
£91.79£86.49
-
25-28kW burner grate
Burner grate suitable for: Trianco Greenflame 25 WES E-Compact 28kW Bioflame 28 Turco 28 Part no. 100501 The burner grate is crafted from high-temperature steel, ensuring unparalleled durability and performance. This essential component is designed to facilitate efficient fuel burning by providing a robust base, allowing optimal access to the ignition element and ensuring fresh oxygen supply through strategically placed air holes. Key Features - High-Temperature Steel Construction: Made from premium high-temperature steel, our burner grate withstands extreme conditions, offering long-lasting durability and reliability. - Optimal Airflow Design: Equipped with precision-engineered air holes, the grate ensures consistent oxygen flow, enhancing combustion efficiency. - Easy Maintenance: Designed for straightforward installation and removal, facilitating hassle-free maintenance and cleaning.
£299.32£272.96
-
25-28kW Burner shroud
Burner shroud suitable for: Trianco Greenflame 25 WES E-Compact 28kW Bioflame 28 Turco 28 Part no. 100502 The burner shroud is crafted from high-temperature steel, ensuring unparalleled durability and performance. This essential component is designed to house the burner grate, which facilitates efficient fuel burning by providing a robust base, allowing optimal access to the ignition element and ensuring fresh oxygen supply through strategically placed air holes. Key Features - High-Temperature Steel Construction: Made from premium high-temperature steel, our burner grate withstands extreme conditions, offering long-lasting durability and reliability. - Easy Maintenance: Designed for straightforward installation and removal without the need for tools, facilitating hassle-free maintenance and cleaning.
£472.46£157.13
-
28kW Burner Auger Flight
This small stoker auger is suitable for the following boilers only: WES E-Compact 28kW Trianco Greenflame 25 Trianco Greenflame ASG 25 Part no. 100203 Also known as a fuel auger, feed auger or stoker auger. This essential component is designed to seamlessly integrate into your fuel feed system, ensuring a reliable and consistent delivery of fuel to your boiler. Key Features: Robust Construction: Crafted from high temperature steel, our fuel auger is built to withstand extreme conditions, providing durability and longevity. Optimized Fuel Delivery: This auger ensures precise and continuous fuel feed, enhancing the overall performance and efficiency of your boiler. Versatile Application: Suitable for various boiler systems, the fuel auger connects the primary burn-back device to the grate, or in some setups, directly to the grate with an integrated burn-back device. Enhanced Safety: Incorporates safety features to prevent burn-back, ensuring secure and stable operation.
£30.55
-
28kW Lower Ash Pan (internal)
This lower ash pan is suitable for the following boilers, but does not include the black frontage: WES E-Compact 28kW Trianco Greenflame 25 Bioflame Greenflame Product no. 100219 This ash pan is held on my two star knobs, which secure the pan to the boiler, ensuring it maintains an air tight seal. The pan collects all the fly ash once it has passed through the heat exchanger, before it exits via the flue into the atmosphere.
£40.09£38.45
-
28kW Pellet Auger Flight
28kW Pellet Auger Flight for the: WES E-Compact 28kW Trianco Greenflame 25 Also Compatible with Classic 15kW boiler model. Product no. 190008 Also known as a fuel auger, feed auger or stoker auger. This essential component is designed to seamlessly integrate into your fuel feed system, ensuring a reliable and consistent delivery of fuel to your boiler. Key Features: Robust Construction: Crafted from high temperature steel, our fuel auger is built to withstand extreme conditions, providing durability and longevity. Optimized Fuel Delivery: This auger ensures precise and continuous fuel feed, enhancing the overall performance and efficiency of your boiler. Versatile Application: Suitable for various boiler systems, the fuel auger connects the primary burn-back device to the grate, or in some setups, directly to the grate with an integrated burn-back device. Enhanced Safety: Incorporates safety features to prevent burn-back, ensuring secure and stable operation.
£93.86
-
3 Metre length - 90mm diameter PVC Tube
This 3-metre PVC tube is designed for use with flexible auger systems, providing a reliable and efficient method for delivering fuel to pellet boilers. At 90mm in diameter, it offers a large enough size to transport an optimal amount of fuel, making it an ideal choice for powering your pellet boiler.
£114.18£95.15
-
40 / 60kW Auger Flight
This stoker auger flight is suitable for the following pellet boilers: WES E-Compact 40kW Trianco Greenflame ECO 40/60kW EkoGREN 40/60kW Product no. 190066 Also known as a fuel auger, feed auger or stoker auger. This essential component is designed to seamlessly integrate into your fuel feed system, ensuring a reliable and consistent delivery of fuel to your boiler. Key Features: Robust Construction: Crafted from high temperature steel, our fuel auger is built to withstand extreme conditions, providing durability and longevity. Optimized Fuel Delivery: This auger ensures precise and continuous fuel feed, enhancing the overall performance and efficiency of your boiler. Versatile Application: Suitable for various boiler systems, the fuel auger connects the primary burn-back device to the grate, or in some setups, directly to the grate with an integrated burn-back device. Enhanced Safety: Incorporates safety features to prevent burn-back, ensuring secure and stable operation.
£158.17
-
40-60kW Baffle
This baffle is suitable for the following boilers: Trianco Greenflame ECO 40kW Trianco Greenflame ECO 60kW WES E-Compact 40kW Product Code: 100910 This steel baffle is essential for controlling heat flow from the burning area through the boiler up to the flue, ensuring maximum heat retention and transfer to the boiler. By incorporating this essential component into your biomass boiler system, you can achieve better energy efficiency, lower fuel costs, and a more reliable heating solution. How It Works The baffle consists of a rolled of steel plate strategically placed to control and direct the flow of heat. As the heat travels from the burning area through the boiler, the baffle slows it down, allowing more time for the heat to radiate from the tubes to the boiler. This process ensures that the maximum amount of heat is transferred to the water jacket, maintaining the boiler’s temperature and improving its overall efficiency. Key Features - Efficient Heat Management: Our baffle ensures that heat is retained within the boiler for as long as possible, maximising the contact between the water jacket and the heat produced by combustion. - Durable Construction: Made from robust steel plates, this baffle is built to withstand high temperatures and prolonged use, providing long-lasting performance. - Improved Boiler Efficiency: By controlling the heat flow, the baffle helps maintain the boiler’s temperature, enhancing overall efficiency and reducing fuel consumption. Versatile Compatibility: This baffle is suitable for Trianco Greenflame ECO 10-25kW and EKOGREN biomass boilers. Installation and Maintenance Installing the biomass boiler baffle is straightforward and can be done with basic tools by a qualified engineer. Regular maintenance involves periodic inspections to ensure the baffle remains in good condition and free from damage. Proper maintenance will extend the baffle's life and maintain your boiler's efficiency.
£271.63
55kW burner chamber
Description This combustion chamber replacement is suitable for the following boilers only: WES E-Compact 55 Bioflame 55 Trianco Greenflame 55kW Product no. 400460 This inner burner tube is crafted from high-temperature steel, ensuring unparalleled durability and performance. This essential component is designed to facilitate efficient fuel burning by providing a robust base, allowing optimal access to the ignition element and ensuring fresh oxygen supply through strategically placed air holes. Key Features - High-Temperature Steel Construction: Made from premium high-temperature steel, our burner grate withstands extreme conditions, offering long-lasting durability and reliability. - Optimal Airflow Design: Equipped with precision-engineered air holes, the grate ensures consistent oxygen flow, enhancing combustion efficiency. - Easy Maintenance: Designed for straightforward installation and removal, facilitating hassle-free maintenance and cleaning.
£3,471.11
-
60kW Chain
This stoker chain is suitbale for the Trianco Greenflame ECO 60kW Product no. ES1016 This chain plays a pivotal role in connecting the stoker motor to the stoker auger, usually via a rotary valve, which acts as a fire break from the pellet hopper. Designed to be a weak point in the event of a jam, these chains protect more valuable equipment by breaking when necessary. Specifications of Biomass Boiler Stoker Chains Understanding the specifications of biomass boiler stoker chains is key to ensuring you select the right one for your system. Here are the critical details: - Material: High-strength steel, resistant to high temperatures and corrosion - Length: Customizable to fit various boiler systems - Load Capacity: Engineered to break under specific loads to protect the system - Compatibility: Suitable for use with various biomass boilers and stoker motors - Durability: Designed for long-lasting performance even under continuous use Importance of Biomass Boiler Stoker Chains Biomass boiler stoker chains are not just any component; they are vital for the smooth operation and safety of your boiler system. Here’s why: Safety Mechanism The primary function of the stoker chain is to act as a safeguard. In the event of a jam in the system, the chain is designed to break, preventing damage to more valuable equipment like the stoker motor and auger. This safety feature is crucial for avoiding costly repairs and downtime. Efficient Operation By ensuring a secure connection between the stoker motor and auger, stoker chains facilitate the efficient transfer of wood pellets from the hopper to the combustion chamber. This efficiency is essential for maintaining consistent heat output and fuel consumption. Compatibility and Versatility Our biomass boiler stoker chains are designed to be compatible with a wide range of biomass boilers, making them suitable for both commercial and domestic applications. Whether you are servicing a large industrial boiler or a smaller domestic stove, our stoker chains provide the reliability you need. Maintenance and Replacement Regular inspection and maintenance of biomass boiler stoker chains are essential to ensure ongoing performance and safety. Here are some tips: - Routine Checks: Inspect the chain for signs of wear and tear, such as rust or deformation. - Lubrication: Apply appropriate lubricants to keep the chain functioning smoothly. - Timely Replacement: Replace the stoker chain if any damage is detected to avoid system malfunctions. Precision Engineering Each chain is precisely engineered to break under specific load conditions, providing a reliable safety mechanism for your boiler system. This precision helps protect your investment in the long run. Customer Support We offer comprehensive customer support to assist you in selecting the right stoker chain for your specific boiler model and to provide guidance on installation and maintenance. Frequently Asked Questions What is the purpose of a biomass boiler stoker chain? The stoker chain connects the stoker motor to the stoker auger, acting as a safety mechanism by breaking under specific conditions to prevent damage to more valuable equipment. How often should biomass boiler stoker chains be inspected? Regular inspections should be carried out every few months to check for wear and tear, rust, or deformation. What materials are biomass boiler stoker chains made from? Stoker chains are made from high-strength steel, which is resistant to high temperatures and corrosion, ensuring durability and long-lasting performance. How do I know if my stoker chain needs to be replaced? If you notice signs of wear, rust, or deformation during routine inspections, it's time to replace the stoker chain to maintain the efficiency and safety of your boiler system. Where can I purchase biomass boiler stoker chains? You can purchase high-quality biomass boiler stoker chains directly from us, where we offer a variety of lengths and specifications to fit your needs.
£26.11
-
90mm diameter PVC bend
This PVC elbow tube is designed for use with flexible auger systems, providing a reliable and efficient method for delivering fuel to pellet boilers. At 90mm in diameter, it offers a large enough size to transport an optimal amount of fuel, making it an ideal choice for powering your pellet boiler.
£81.61£68.01
-
90W Motor c/w 40:1 Gearbox
This 90W Motor comes with the 40:1 Ratio Gear Box. This is suitable and commonly found on long feed auger applications and de-ash systems. Product Code: 400329 Built to withstand demanding conditions, this auger motors ensure seamless and reliable fuel delivery, enhancing the efficiency and longevity of your biomass boiler system. It is commonly used for commercial de-ash systems and fuel delivery systems. Features Durable Construction: Engineered with high-quality materials to endure continuous operation and harsh environments, providing long-term reliability. Efficient Fuel Delivery: Precisely drives fuel into the combustion chamber, optimizing combustion efficiency and reducing waste. Custom Fit: Specifically designed to match the specifications of your biomass boiler, ensuring a perfect fit and easy installation. Low Maintenance: Built with user-friendly components that require minimal maintenance, reducing downtime and operational costs.
£296.20
-
Air Cleaning Compressor (commercial)
This commercial burner cleaning compressor is used on the following models of pellet boiler: WES E-Compact 55-199 Trianco Greenflame 55-199 Woodpecker 55-199 Bioflame 55-199 Turco 55-199 Woodco 55-215 Product no. 400721 This Cleaning Compressor, is a vital component designed to maintain the optimal performance of your biomass boiler system. This compressor, in conjunction with a solenoid valve, effectively blasts the burner grate clean after each extinguish cycle, ensuring a pristine surface for the next startup. Key Features: Automatic Cleaning: The compressor operates automatically after the boiler extinguishes, releasing a powerful burst of air through the solenoid valve to clear the burner grate of any accumulated ash and debris. This process prevents buildup and ensures the grate is ready for the next ignition cycle. Efficiency Enhancement: By keeping the burner grate clean, the compressor helps maintain the efficiency of your biomass boiler, reducing the risk of failed ignitions due to blocked airways. Durable Construction: Built to withstand the demanding conditions of biomass boiler operations, the compressor ensures long-term reliability and performance. Indicators of Compressor Issues: No Charging Sound: If you no longer hear the compressor charging, it may indicate a malfunction that needs addressing. Increased Ash Deposits: Noticeable ash buildup on the burner grate can lead to blocked airways, causing ignition failures. This is a sign that the compressor may not be functioning properly. Why Choose Our Compressor: Enhanced Boiler Performance: Regular use of the cleaning compressor significantly improves the efficiency and longevity of your biomass boiler by preventing ash buildup and ensuring a clean burner grate for each start-up. Reduced Maintenance: The automatic cleaning process minimizes the need for manual cleaning, saving you time and effort in maintaining your boiler system. Manufacturer supplied: all our products are supplied by the genuine manufacturer Ensure your biomass boiler remains efficient and reliable with our advanced Biomass Boiler Cleaning Compressor. For the best results, combine with our comprehensive service and maintenance plans to keep your system in top condition year-round.
£319.66£194.60
-
Air cleaning solenoid (for 55kW)
This 3/4" WRAS Approved Brass Air/Water cleaning solenoid is typically used for the following boilers, however it also has many other industry uses, and its specifications are listed below: Trianco Greenflame 55kW WES E-Compact 55 Bioflame 55 Product Overview Engineered for durability and efficiency, the 3/4" WRAS-approved Water Solenoid Valve PU220D-06 offers reliable performance for various water control applications. This 2/2-way normally closed valve is crafted from premium brass and equipped with an advanced anti-water hammer design, ensuring smooth operation without disruptive noise. Ideal for environments requiring precise flow control, this valve stands out with its high-pressure rating, reliable performance, and WRAS certification, making it a trustworthy choice for both industrial and residential use. Key Features Port Size: 3/4 inch BSPP thread (options available for NPT or Rc thread)Coil Power: 15 Watts (17-23VA) for standard operation, with optional 18.5 Watt coil for enhanced pressure capabilityVoltage: 230V AC, 50/60Hz (additional voltage options available upon request)Pressure Range: - 0 to 7 Bar** with 15 Watt Coil (AC) - 0 to 5 Bar** with DC Voltage - 0 to 10 Bar** with 18.5 Watt Coil- Flow Capacity: Kv flow factor of 125 L/min based on water with a 1 bar pressure difference- Temperature Range: Operates in temperatures from -5°C to +90°C- Construction**: - Body: Durable brass for longevity - Internal Components: Stainless steel for corrosion resistance - Seals: EPDM WRAS-approved, ensuring safety and reliability in water applications- Protection: IP65 rated with included electrical connector for added safety in wet environments- Operation: Assisted lift (zero rated) for consistent flow control- Certifications: WRAS Certificate No. 2306329, IP65, CE marked, Class H DIN43650A compliant Why Choose This Solenoid Valve? - Quality Assurance: Tested rigorously with over 200,000 open/close cycles at 7 Bar to ensure reliable, long-term performance.- Versatile Application Suitable for a wide range of applications, from industrial water systems to residential setups needing controlled water flow.- Enhanced Safety: WRAS approval and IP65 rating guarantee safe use in water-related installations, while the anti-water hammer design protects against disruptive noise and pressure surges.- Multiple Voltage Options: This unit can be adapted for various power requirements, including AC and DC voltages across a range of options, making it adaptable to different systems. Additional Specifications - Orifice Size: 20mm for optimal flow rate- ATEX Certified Coil Option: Available for hazardous areas (Zones 21 and 22) with Ex mb IIC T4 and Gb Ex mb tb IIIC ratings, suitable for media up to +80°C at a maximum pressure of 3 Bar. This water solenoid valve offers a high level of reliability and durability, designed to meet rigorous standards and deliver smooth, efficient water control in demanding environments.
£145.86£86.76
-
Air Release Valve / Automatic Air Bottle Vent 3/8" with Check Valve
This air release valve is commonly found on many biomass boilers. This Automatic Air Bottle Vent is equipped with a Check Valve, compatible with biomass boiler systems to facilitate air removal and allow maintenance without draining. These vents, with a height of 87 mm excluding the thread, are compatible with diverse boiler models. Essential for system efficiency and safety, they are suitable for domestic and commercial boilers. A critical component in ensuring the operational integrity and longevity of biomass boilers.
£9.99£5.94
-
Ash pan
This ash tray is located in the main combustion chamber of the following boilers and helps the end user with the weekly removal of ash: WES E-Compact 28kW Trianco Greenflame 25 Bioflame 25 - 28 Greenflame 25 - 28 Turco 25-28 Product no. 100220
£103.72£54.16
-
Ash Pan Sealing Tape 1m
This ash pan sealing tape is typically found on the following pellet boilers, but can be used on a variety of stoves and boilers if required: WES E-Compact 28kW WES 15, 18 SLIM Trianco Greenflame 25 Greenflame Bioflame Woodpecker Product no. 700001 This sealing tape is fire proof and designed to seal various panels and doors to the boiler to make an air tight fit.
£5.21
-
Ash Pan Star Knob
This M10 star knob is typically found on the following boilers, to secure their lower ash tray and heat exchanger lids: WES E-Compact 28kW WES 18 SLIM Trianco Greenflame 18 SLIM Trianco Greenflame 25 WES E-Compact 55-199 Woodco 215 Woodco Prestige Triaanco Greenflame 55-199 Bioflme Product no. 300077 Discover our premium heavy-duty handwheels, designed for strength, durability, and ease of use. Crafted from resilient phenolic resin, these handwheels are built to withstand demanding applications while offering a comfortable grip and robust threaded connections. With both male and female options and diameters ranging from 32mm to 80mm, this collection is versatile and adaptable to various needs. Key Features Phenolic Resin Construction: Ensures high durability and longevity, resisting wear and tear in tough environments. Comfortable Handle Design: Ergonomically designed for a secure, comfortable grip, reducing hand fatigue. Range of Sizes: Available in diameters from 32mm to 80mm, providing options to suit different equipment. Thread Size Options: Choose from sturdy M6 to M16 thread sizes, ensuring compatibility across various applications. Versatile Use: Ideal for industrial and mechanical settings, providing precise control with every turn. Why Choose Our Heavy Duty Handwheels?These handwheels offer not only strength but also exceptional control, making them an essential choice for machinery requiring precise adjustments. With a focus on durability and user comfort, they are built to last, allowing you to confidently rely on them for years to come.
£21.70£8.43
-
Auger Flight Bushings - 28kW / 15-18kW Slim (x2)
This pair of pellet auger bushings is suitable for the following: WES E-Compact 15, 18, 28 Trianco Greenflame 25 WES SLIM 15/18 Bioflame 18 & 28 16mm ID / 20mm OD Product Code: 300088 This bronze oil-filled bushing is a thin tube most commonly used for machinery with rotating or sliding shafts to improve efficiency and reduce vibration and noise. They are most commonly used on biomass boilers for moving augers, to keep them centralised in their channel and to prevent seizing. Comes as a set of 2
£14.38£13.76
-
Auger Motor
This 15W motor is used as a burner stoker motor, feed motor and heat exchanger cleaning motor for different models. It is suitable for the following biomass boilers: Stoker & Auger motor WES E-Compact 15, 18, 28 WES SLIM WOODCO Prestige Trianco Greenflame Turco Bioflame Woodpecker Heat exchanger cleaning motor: *WES E-Compact 15, 18, 28, 55, 85, 100, 125, 150, 199 *Trianco Greenflame 15, 18, 28 *Some older heat exchanger cleaning motors have been upgraded to a more powerful unit, so please check before ordering which is required Product no. 400015 Introducing the premium Fuel Auger Motor, a critical component designed for biomass boilers. Also known as feed auger motors or stoker motors, these robust devices efficiently drive fuel from various storage areas and interlocks into the combustion chamber. Built to withstand demanding conditions, our auger motors ensure seamless and reliable fuel delivery, enhancing the efficiency and longevity of your biomass boiler system. Features High Performance: Available in various power ratings to meet different load requirements, ensuring optimal performance tailored to your specific biomass boiler. Durable Construction: Engineered with high-quality materials to endure continuous operation and harsh environments, providing long-term reliability. Efficient Fuel Delivery: Precisely drives fuel into the combustion chamber, optimizing combustion efficiency and reducing waste. Custom Fit: Specifically designed to match the specifications of your biomass boiler, ensuring a perfect fit and easy installation. Low Maintenance: Built with user-friendly components that require minimal maintenance, reducing downtime and operational costs.
£207.01£198.79
-
Belimo 01APS-10R Differential Pressure Switch
The Belimo 01APS-10R Differential Pressure Switch is designed for monitoring overpressure, vacuum, and differential pressure of air or other non-combustible, non-aggressive gases. This versatile switch is ideal for HVAC and energy management applications, featuring setpoint adjustment and automatic reset capabilities. Click here for the technical data PDF Type: 01APS-10R Measuring range [Pa]: 20...300Repeating accuracy: ±5%, min. ±5 Pa Switching differential (pressure): 10 Pa Burst pressure: 10 kPa Parts Included PVC Tube: 2 meters Pitot Tubes: 2 plastic tubes Screws High Accuracy and Reliability: Ensures precise monitoring with a repeating accuracy ranging from ±1% to ±5%. Durable Construction: Designed to handle up to 10 kPa burst pressure, with a service life of over 1,000,000 switching operations. Wide Measuring Range: Models available for different pressure ranges from 20 Pa to 5000 Pa. Robust Electrical Data: Supports a maximum contact current of 1.0 A at AC 250 V Flexible Installation: Comes with a cable gland for strain relief and supports various wire sizes. Electrical Data Connection: Terminals for wire sizes 0.5 to 1.5 mm² Cable Entry: Cable gland with strain relief, ø5 to 10 mm Functional Data Application: Suitable for air Output Signal: Pressure switch with max contact current 1.0 A at AC 250 V Service Life: Minimum of 1,000,000 switching operations Measuring Data Measured Values: Differential pressure Measuring Fluid: Air, non-combustible and non-aggressive gases Long Term Stability: ≤±15% deviation over 250,000 operations/cycles (EN1854) Safety Data Degree of Protection (IEC/EN): IP54 Degree of Protection (NEMA/UL): NEMA 13 Low Voltage Directive: CE according to 2014/35/EU EU Conformity: CE Marking Certification: IEC/EN 60730-1 Quality Standard: ISO 9001 Environmental Conditions Ambient Humidity: Max. 95% RH, non-condensing Ambient Temperature: -20 to 85°C [-4 to 185°F] Fluid Temperature: -20 to 85°C [-4 to 185°F] Storage Temperature: -40 to 85°C [-40 to 185°F] Accessories Mounting Bracket (L form): Metal, Type A-22AP-A06 Mounting Bracket (S form): Metal, Type A-22AP-A07 Cable Entry: M20x1.5, Multipack 10 pcs, Type A-22AP-A11.1 Duct Connector Kit: PVC tube 2 m, 2 plastic connection elements, Multipack 50 pcs, Type A-22AP-A05.1 Pitot Tube: Plastic, L 80 mm, Tube connection 6 mm, Multipack 90 pcs, Type A-22AP-A09.1 Additional Notes Ensure all power is disconnected before installation. Only authorised specialists may carry out installation. This device must not be used outside the specified field of application. The product must be disposed of according to local regulations and requirements. Why Choose Belimo? Belimo is renowned for its high-quality HVAC solutions, ensuring reliability and precision in every product. The 01APS-10R Differential Pressure Switch exemplifies this commitment, offering robust performance and extensive operational life, making it a trusted choice for engineering professionals and tradesmen. Explore our full range of Belimo products. If you need any assistance, please contact us.
£31.00£21.70
-
Belimo 01APS-10R.1 diferential air pressure switch
The Belimo 01APS-10R.1 series differential air pressure switch is designed for monitoring overpressure, vacuum, and differential pressure of air or other non-combustible, non-aggressive gases. Ideal for both HVAC and energy management applications, it features setpoint adjustment and automatic reset for optimal performance and reliability. Click here for the technical data PDF Parts Included PVC tube (2 meters) 2x Pitot tubes (plastic) Screws Electrical Data: Electrical Connection: Terminals for wire 0.5...1.5 mm² Cable Entry: Cable gland with strain relief ø5...10 mm Functional Data: Application: Air Output Signal Pressure Switch Note: Contact current max. 1.0 A / AC 250 V Service Life: Minimum of 1,000,000 switching operations Measuring Data: Measured Values: Differential pressure Measuring Fluid: Air, non-combustible and non-aggressive gases Long-Term Stability: ≤±15% deviation over 250,000 operations/cycles (EN1854) Safety Data: Degree of Protection IEC/EN: IP54 Degree of Protection NEMA/UL: NEMA 13 Low Voltage Directive: CE according to 2014/35/EU EU Conformity: CE Marking Certification IEC/EN: IEC/EN 60730-1 Quality Standard: ISO 9001 Ambient Humidity: Max. 95% RH, non-condensing Ambient Temperature: -20...85°C (-4...185°F) Fluid Temperature: -20...85°C (-4...185°F) Storage Temperature: -40...85°C (-40...185°F) Housing: Bottom Part: PA 6.6, Top Cover: PS Types and Measuring Ranges 01APS-10R: 20...300 Pa, ±5% accuracy, 10 Pa differential, 10 kPa burst pressure 01APS-10U: 50...500 Pa, ±2.5% accuracy, 20 Pa differential, 10 kPa burst pressure 01APS-101: 200...1000 Pa, ±1% accuracy, 100 Pa differential, 10 kPa burst pressure 01APS-104: 500...2500 Pa, ±1% accuracy, 150 Pa differential, 10 kPa burst pressure 01APS-105: 1000...5000 Pa, ±1% accuracy, 250 Pa differential, 10 kPa burst pressure Optional Accessories Mounting Bracket L Form: A-22AP-A06 Mounting Bracket S Form: A-22AP-A07 Cable Entry, M20x1.5: A-22AP-A11.1 (Multipack 10 pcs.) Duct Connector Kit: A-22AP-A05.1 (Multipack 50 pcs.) Pitot Tube: A-22AP-A09.1 (Multipack 90 pcs.) Installation Notes Ensure all power is disconnected before installing. Only authorized specialists may carry out installation. Comply with all applicable legal or institutional installation regulations. Permissible installation orientation: vertical with downward pressure ports or horizontal with upward AMP connecting lugs. Do not mount the differential pressure switch upside down. The device must not be disposed of as household refuse; follow local regulations for disposal. Why Choose Belimo Differential Pressure Switch? Reliability: Designed for a long service life with a minimum of 1,000,000 switching operations. Versatility: Suitable for various HVAC and energy management applications. Safety Compliance: Certified under IEC/EN 60730-1 and conforms to CE marking standards. Quality Assurance: Manufactured under ISO 9001 quality standards. Ease of Installation: Comes with necessary parts and clear installation instructions. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please contact us.
£1,035.00£724.50
-
Belimo 01APS-10U Differential Pressure Switch
The Belimo 01APS-10U Differential Pressure Switch is designed for monitoring overpressure, vacuum, and differential pressure of air or other non-combustible, non-aggressive gases. This versatile switch is ideal for HVAC and energy management applications, featuring setpoint adjustment and automatic reset capabilities. Click here for the technical data PDF Parts Included PVC Tube: 2 meters Pitot Tubes: 2 plastic tubes Screws High Accuracy and Reliability: Ensures precise monitoring with a repeating accuracy ranging from ±1% to ±5%. Durable Construction: Designed to handle up to 10 kPa burst pressure, with a service life of over 1,000,000 switching operations. Wide Measuring Range: Models available for different pressure ranges from 20 Pa to 5000 Pa. Robust Electrical Data: Supports a maximum contact current of 1.0 A at AC 250 V Flexible Installation: Comes with a cable gland for strain relief and supports various wire sizes. Electrical Data Connection: Terminals for wire sizes 0.5 to 1.5 mm² Cable Entry: Cable gland with strain relief, ø5 to 10 mm Functional Data Application: Suitable for air Output Signal: Pressure switch with max contact current 1.0 A at AC 250 V Service Life: Minimum of 1,000,000 switching operations Measuring Data Measured Values: Differential pressure Measuring Fluid: Air, non-combustible and non-aggressive gases Long Term Stability: ≤±15% deviation over 250,000 operations/cycles (EN1854) Safety Data Degree of Protection (IEC/EN): IP54 Degree of Protection (NEMA/UL): NEMA 13 Low Voltage Directive: CE according to 2014/35/EU EU Conformity: CE Marking Certification: IEC/EN 60730-1 Quality Standard: ISO 9001 Environmental Conditions Ambient Humidity: Max. 95% RH, non-condensing Ambient Temperature: -20 to 85°C [-4 to 185°F] Fluid Temperature: -20 to 85°C [-4 to 185°F] Storage Temperature: -40 to 85°C [-40 to 185°F] Accessories Mounting Bracket (L form): Metal, Type A-22AP-A06 Mounting Bracket (S form): Metal, Type A-22AP-A07 Cable Entry: M20x1.5, Multipack 10 pcs, Type A-22AP-A11.1 Duct Connector Kit: PVC tube 2 m, 2 plastic connection elements, Multipack 50 pcs, Type A-22AP-A05.1 Pitot Tube: Plastic, L 80 mm, Tube connection 6 mm, Multipack 90 pcs, Type A-22AP-A09.1 Additional Notes Ensure all power is disconnected before installation. Only authorised specialists may carry out installation. This device must not be used outside the specified field of application. The product must be disposed of according to local regulations and requirements. Why Choose Belimo? Belimo is renowned for its high-quality HVAC solutions, ensuring reliability and precision in every product. The 01APS-10U Differential Pressure Switch exemplifies this commitment, offering robust performance and extensive operational life, making it a trusted choice for engineering professionals and tradesmen. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please contact us.
£31.00£21.70
-
Belimo 01DT-1LH duct/immersion temperature sensor
The 01DT-1L series is a versatile temperature sensor designed for precise measurement in duct applications. When paired with a stainless steel or brass thermowell, it is also suitable for pipe applications. This sensor series is housed in an IP65 / NEMA 4X rated enclosure, ensuring robust protection against environmental factors. Type: 01DT-1LH Output signal: NTC10k (10k2) Probe length: 50 mm Probe diameter: 6 mm Parts Included: Mounting Clip: A-22D-A11, with screws and adhesive foil Electrical Data Connection Supply / Control: Pluggable spring-loaded terminal block (max. 2.5 mm²) Cable Entry: Cable gland with strain relief (ø6...8 mm) Functional Data Application: Air, Water Output Signal (Passive): NTC10k (10k2) Measuring Data Measured Values: Temperature Temperature Measuring Range: -50...150°C [-60...300°F] Measuring Current: <2 mA @ 25°C [77°F] Accuracy Temperature Passive: ±0.2°C @ 25°C [±0.35°F @ 77°F] Time Constant in Water Pipe (with thermowell): Brass: Typical 7 s Stainless Steel: Typical 9 s Time Constant in Air Duct: 0 m/s: Typical 210 s 3 m/s: Typical 46 s Safety Data Protection Class IEC/EN: III, Protective Extra-Low Voltage (PELV) Power Source UL: Class 2 Supply Degree of Protection IEC/EN: IP65 Degree of Protection NEMA/UL: NEMA 4X EU Conformity: CE Marking Certification IEC/EN: IEC/EN 60730-1 Quality Standard: ISO 9001 UL Approval: cULus acc. to UL60730-1A/-2-9, CAN/CSA E60730-1/-2-9 Environmental Conditions Ambient Humidity: Max. 95% RH, non-condensing Ambient Temperature: -35...50°C [-30...122°F] Fluid Temperature: -50...150°C [-60...300°F] Housing Surface Temperature: Max. 90°C [195°F] Materials Cable Gland: Plug Adapter: PA66, black Nut: PA6, black Housing: Cover: PC, orange Bottom: PC, orange Seal: NBR70, black (UV resistant) Probe Material: V4A (1.4404) Optional Accessories Mounting Plate S Housing: A-22D-A09 Connection Adapter Flex Conduit: M20x1.5, for cable gland 1x 6 mm, Multipack 10 pcs., A-22G-A01.1 Mounting Flange for Sensor Probe (Air): Plastic: A-22D-A03 (up to max. 120°C [248°F]) Brass: A-22D-A05 (up to max. 260°C) Thermowells (Water): Stainless Steel: A-22P-A06, A-22P-A08, A-22P-A10, A-22P-A12, A-22P-A14, A-22P-A16 Brass: A-22P-A18, A-22P-A20, A-22P-A22, A-22P-A24, A-22P-A26, A-22P-A28 Other Accessories: Syringe with thermal paste (A-22P-A44), Compression fitting (A-22P-A45), Cold barrier (A-22P-A51), Adapter for Siemens thermowell (A-22P-A53) Why You Should Buy Versatility: Suitable for both air and water applications. Durability: Robust construction with high protection ratings (IP65 / NEMA 4X). Precision: High accuracy and fast response times for reliable temperature measurement. Quality Assurance: Certified to international standards (CE, IEC/EN 60730-1, ISO 9001). For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please contact us on 01772 284 626.
£35.70£24.99
-
Belimo 01DT-1LL Temperature Sensor
For precise temperature measurement in duct and pipe applications, the Belimo 01DT-1L series temperature sensors offer superior reliability and accuracy. Ideal for integration in heating, ventilation, and air-conditioning systems, these sensors ensure optimal performance and energy efficiency. Click here for the technical data PDF The Belimo 01DT-1L series temperature sensors are designed for measuring temperature in duct and pipe applications, providing reliable and accurate data. The sensors are compatible with a stainless steel or brass thermowell for enhanced protection and extended application possibilities. The IP65 / NEMA 4X rated enclosure ensures durability and protection against environmental factors. Parts Included: Mounting clip, with screws and adhesive foil (A-22D-A11) Type Overview 01DT-1LH: NTC10k (10k2), 50 mm probe length, 6 mm probe diameter 01DT-1LL: NTC10k (10k2), 100 mm probe length, 6 mm probe diameter 01DT-1LN: NTC10k (10k2), 150 mm probe length, 6 mm probe diameter 01DT-1LP: NTC10k (10k2), 200 mm probe length, 6 mm probe diameter 01DT-1LR: NTC10k (10k2), 300 mm probe length, 6 mm probe diameter 01DT-1LT: NTC10k (10k2), 450 mm probe length, 6 mm probe diameter Functional Data: Application: Air, Water Output signal passive temperature: NTC10k (10k2) Measuring range: -50...150°C [-60...300°F] Measuring current: <2 mA @ 25°C [77°F] Accuracy temperature passive: ±0.2°C @ 25°C [±0.35°F @ 77°F] Time constant τ (63%) in water pipe: Typical 7 s with thermowell brass, Typical 9 s with thermowell stainless steel Time constant τ (63%) in the air duct: Typical 210 s @ 0 m/s, Typical 46 s @ 3 m/s Environmental Data: Type of action: Type 1 Rated impulse voltage supply: 0.8 kV Pollution degree: 3 Ambient humidity: Max. 95% RH, non-condensing Ambient temperature: -35...50°C [-30...122°F] Fluid temperature: -50...150°C [-60...300°F] Housing surface temperature: Max. 90°C [195°F] Materials: Cable gland: Plug Adapter: PA66, black; Nut: PA6, black Housing: Cover: PC, orange; Bottom: PC, orange; Seal: NBR70, black; UV resistant Probe material: V4A (1.4404) Optional Accessories: Mounting plate S housing: A-22D-A09 Connection adapter flex conduit: M20x1.5, for cable gland 1x 6 mm (A-22G-A01.1) Mounting flange for sensor probe 6 mm: up to max. 120°C [248°F], Plastic (A-22D-A03) Mounting flange for sensor probe 6 mm: up to max. 260°C, Brass (A-22D-A05) Recommended Accessories for Water: Thermowell Stainless steel, 50 mm, G 1/2", SW27: A-22P-A06 Thermowell Brass, 50 mm, R 1/2", SW22: A-22P-A18 Syringe with thermal paste: A-22P-A44 Compression fitting, Stainless steel, G 1/4" (external thread) for 6 mm, with cutting ring: A-22P-A45 Thermowell Stainless steel, 100 mm, G 1/2", SW27: A-22P-A08 Thermowell Brass, 100 mm, R 1/2", SW22: A-22P-A20 Cold barrier, Plastic, L 50 mm, for thermowell A-22P-A..: A-22P-A51 Thermowell Stainless steel, 150 mm, G 1/2", SW27: A-22P-A10 Thermowell Brass, 150 mm, R 1/2", SW22: A-22P-A22 Adapter for Siemens thermowell: A-22P-A53 Thermowell Stainless steel, 200 mm, G 1/2", SW27: A-22P-A12 Thermowell Brass, 200 mm, R 1/2", SW22: A-22P-A24 Thermowell Stainless steel, 300 mm, G 1/2", SW27: A-22P-A14 Thermowell Brass, 300 mm, R 1/2", SW22: A-22P-A26 Thermowell Stainless steel, 250 mm, G 1/2", SW27: A-22P-A29 Thermowell Brass, 250 mm, R 1/2", SW22: A-22P-A30 Thermowell Stainless steel, 450 mm, G 1/2", SW27: A-22P-A16 Thermowell Brass, 450 mm, R 1/2", SW22: A-22P-A28 Why You Should Buy The Belimo 01DT-1L series temperature sensors are crafted for precision and reliability in demanding HVAC applications. Their robust construction, superior protection class, and high accuracy make them the ideal choice for ensuring optimal performance and energy efficiency. With a wide range of probe lengths and comprehensive accessory options, these sensors offer versatile solutions for various installation requirements. All Belimo products can be found on our website. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£35.70£24.99
-
Belimo 01DT-1LR Duct/Immersion Sensor Temperature
The Belimo 01DT-1LR Duct/Immersion Sensor is designed for precise temperature measurement in duct and pipe applications. Engineered with advanced technology, this sensor is ideal for HVAC systems, providing reliable data for efficient climate control. Its robust construction and IP65/NEMA 4X-rated enclosure ensure durability and resistance to harsh environmental conditions. Click here for the technical data PDF Parts Included: - Mounting Clip with Screws and Adhesive Foil: A-22D-A11 Type Overview: - Output Signal: NTC10k (10k2) - Probe Length: 300 mm - Probe Diameter: 6 mm Electrical Data: - Electrical Connection: Pluggable spring-loaded terminal block, max. 2.5 mm² - Cable Entry: Cable gland with strain relief, ø6...8 mm Functional Data: - Application: Air, Water - Output Signal: Passive temperature NTC10k (10k2) Measuring Data: - Measured Values: Temperature - Temperature Measuring Range: -50...150°C [-60...300°F] - Measuring Current: <2 mA @ 25°C [77°F] - Accuracy Temperature Passive: ±0.2°C @ 25°C [±0.35°F @ 77°F] - Time Constant τ (63%) in Water Pipe: Typical 7 s with thermowell brass, Typical 9 s with thermowell stainless steel - Time Constant τ (63%) in Air Duct: Typical 210 s @ 0 m/s, Typical 46 s @ 3 m/s Safety Data: - Protection Class IEC/EN: III, Protective Extra-Low Voltage (PELV) - Power Source UL: Class 2 Supply - Degree of Protection IEC/EN: IP65 - Degree of Protection NEMA/UL: NEMA 4X - EU Conformity: CE Marking - Certification IEC/EN: IEC/EN 60730-1 - Quality Standard: ISO 9001 - UL Approval: cULus acc. to UL60730-1A/-2-9, CAN/CSA E60730-1/-2-9 Environmental Conditions: - Type of Action: Type 1 - Rated Impulse Voltage Supply: 0.8 kV - Pollution Degree: 3 - Ambient Humidity: Max. 95% RH, non-condensing - Ambient Temperature: -35...50°C [-30...122°F] - Fluid Temperature: -50...150°C [-60...300°F] - Housing Surface Temperature: Max. 90°C [195°F] Materials: - Cable Gland Plug Adapter: PA66, black - Nut: PA6, black - Housing Cover: PC, orange - Bottom: PC, orange - Seal: NBR70, black, UV resistant - Probe Material: V4A (1.4404) Optional Accessories: - Mounting Plate S Housing: A-22D-A09 - Connection Adapter Flex Conduit, M20x1.5, for Cable Gland 1x 6 mm, Multipack 10 pcs.: A-22G-A01.1 - Mounting Flange for Sensor Probe 6 mm, up to max. 120°C [248°F], Plastic: A-22D-A03 - Mounting Flange for Sensor Probe 6 mm, up to max. 260°C, Brass: A-22D-A05 Recommended Accessories for Water Applications: - Thermowell Stainless Steel, 50 mm, G 1/2", SW27: A-22P-A06 - Thermowell Brass, 50 mm, R 1/2", SW22: A-22P-A18 - Syringe with Thermal Paste: A-22P-A44 - Compression Fitting, Stainless Steel, G 1/4" (external thread) for 6 mm, with Cutting Ring: A-22P-A45 Reliable Performance: Ensures accurate temperature measurement across a wide range of applications. Durable Construction: IP65/NEMA 4X rated enclosure provides excellent protection against environmental factors. Versatile Use: Suitable for both air and water applications with a variety of probe lengths to meet specific requirements. Compliance and Quality: Certified to meet international standards, ensuring quality and safety. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£39.90£27.93
-
Belimo 01DT-1NN duct/immersion temperature sensor
The Belimo 01DT-1N is a versatile duct/immersion temperature sensor designed for accurate temperature measurement in HVAC applications. It can be used in both air ducts and pipe applications when paired with a suitable thermowell. The sensor is housed in an IP65/NEMA 4X rated enclosure, ensuring durability and protection against dust and water ingress. Click here for the technical data PDF Type: 01DT-1NN Output signal: NTC10k Carel Probe length: 50 mm Probe diameter: 6 mm Parts Included: Mounting Clip: A-22D-A11, with screws and adhesive foil Electrical Data: Electrical Connection: Pluggable spring-loaded terminal block, max. 2.5 mm² Cable Entry: Cable gland with strain relief, ø6...8 mm Functional Data: Application: Suitable for air and water Output Signal: Passive temperature NTC10k Carel Measuring Data: Measured Values: Temperature Temperature Measuring Range: -50...150°C (-60...300°F) Measuring Current: <0.2 mA at 25°C (77°F) Accuracy Temperature Passive: ±0.26°C at 25°C (±0.48°F at 77°F) Time Constant τ (63%): - In water pipe with thermowell brass: Typical 7 s - With thermowell stainless steel: Typical 9 s - In air duct at 0 m/s: Typical 210 s - In air duct at 3 m/s: Typical 46 s Safety Data: Protection Class IEC/EN: III, Protective Extra-Low Voltage (PELV) Power Source UL: Class 2 Supply Degree of Protection IEC/EN: IP65 Degree of Protection NEMA/UL: NEMA 4X EU Conformity: CE Marking Certification IEC/EN: IEC/EN 60730-1 Quality Standard: ISO 9001 UL Approval: cULus acc. to UL60730-1A/-2-9, CAN/CSA E60730-1/-2-9 Type of Action: Type 1 Rated Impulse Voltage Supply: 0.8 kV Pollution Degree: 3 Ambient Humidity: Max. 95% RH, non-condensing Ambient Temperature: -35...50°C (-30...122°F) Fluid Temperature: -50...150°C (-60...300°F) Housing Surface Temperature: Max. 90°C (195°F) Materials: Cable Gland Plug Adapter: PA66, black Nut: PA6, black Housing Cover and Bottom: PC, orange Seal: NBR70, black Probe Material: V4A (1.4404) Optional Accessories: Mounting Plate S Housing: A-22D-A09 Connection Adapter Flex Conduit: M20x1.5, for cable gland 1x 6 mm, Multipack 10 pcs. A-22G-A01.1 Optional Accessories for Air: Mounting Flange for Sensor Probe: 6 mm, up to max. 120°C (248°F), Plastic A-22D-A03 6 mm, up to max. 260°C, Brass A-22D-A05 Recommended Accessories for Water: Thermowell Stainless Steel: 150 mm, G 1/2", SW27 A-22P-A10 100 mm, G 1/2", SW27 A-22P-A08 Thermowell Brass: 150 mm, R 1/2", SW22 A-22P-A22 100 mm, R 1/2", SW22 A-22P-A20 Syringe with Thermal Paste: A-22P-A44 Compression Fitting: Stainless steel, G 1/4" (external thread) for 6 mm, with cutting ring A-22P-A45 Cold Barrier: Plastic, L 50 mm, for thermowell A-22P-A.. A-22P-A51 Adapter for Siemens Thermowell: A-22P-A53 For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please contact us.
£40.60£28.42
-
Belimo 01HT-1L Temperature Sensor
The Belimo 01HT-1L contact temperature sensor is designed for pipe applications. Its spring-loaded brass contact pin ensures precise and rapid temperature readings. This sensor is an essential component for heating, ventilation, and air-conditioning systems, providing accurate temperature measurements. Click here for the technical data PDF Parts Included Fixing Strap: Suitable for pipes ø20...110 mm (0.8...4.3") Type Options: Available in multiple types for various output signals: 01HT-1A: Pt100 01HT-1B: Pt1000 01HT-1C: Ni1000 01HT-1D: Ni1000TK5000 01HT-1F: NTC1k8 01HT-1L: NTC10k (10k2) 01HT-1Q: NTC20k Electrical Data Connection: Pluggable spring-loaded terminal block (max. 2.5 mm²) Cable Entry: Cable gland with strain relief (ø6...8 mm) Functional Data Temperature Specifications: Active: Time constant τ (63%) on water pipe with thermal contact fluid: Typical 16 s Passive: Measuring range: -35...90°C (-30...195°F) Accuracy: Pt..: Class B, ±0.3°C @ 0°C (±0.5°F @ 32°F) Ni..: ±0.4°C @ 0°C (±0.7°F @ 32°F) NTC1k8: ±0.5°C @ 25°C (±0.9°F @ 77°F) NTC..: ±0.2°C @ 25°C (±0.35°F @ 77°F) Safety Data Protection Class IEC/EN: III, Protective Extra-Low Voltage (PELV) Power Source UL: Class 2 Supply Degree of Protection IEC/EN: IP54 Degree of Protection NEMA/UL: NEMA 1 Enclosure UL: Enclosure Type 1 Certification IEC/EN: IEC/EN 60730-1 UL Approval: cULus acc. to UL60730-1A/-2-9, CAN/CSA E60730-1/-2-9 Pollution Degree: 2 Rated Impulse Voltage Supply: 0.8 kV Environmental Data Ambient Humidity: Max. 95% RH, non-condensing Ambient Temperature: -35...50°C (-30...122°F) Fluid Temperature: -35...90°C (-30...195°F) Housing Surface Temperature: Max. 90°C (195°F) Materials Cable Gland: PA6, black Housing: Cover: PC, orange Bottom: PC, orange Seal: NBR70, black UV Resistant Optional Accessories Fixing Strap for Larger Pipes: ø20...250 mm (0.8...9.8") A-22P-A49 Thermal Contact Fluid Syringe: A-22P-A44 Connection Adapter Flex Conduit: M20x1.5, for cable gland 1x 6 mm (Multipack 10 pcs.) A-22G-A01.1 Installation and Safety Notes Designed for stationary heating, ventilation, and air-conditioning systems. Unauthorised modifications are prohibited. Ensure all power is disconnected before installation. Installation should be carried out by authorised specialists only. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please contact us on 01772 284 626.
£29.00£20.30
-
Belimo 01RT-1L-0 Room Sensor
Enhance your HVAC system with the Belimo 01RT-1L-0 room sensor, designed for precise temperature measurement and seamless integration with third-party controllers. Perfect for maintaining optimal climate control in residential, commercial, and industrial settings. The Belimo 01RT-1L-0 room sensor is engineered to measure room temperature accurately. Its design allows for easy installation and compatibility with various control systems. Whether for in-wall or on-wall wiring, this sensor ensures reliable performance and longevity. Included Parts: Screws Electrical Data: Electrical Connection: Spring loaded terminal 0.5...1.5 mm² Cable Entry: Wire openings at the backside (for in-wall wiring) and top-/bottom side (for on-wall wiring) Functional Data: Application: Air Output Signal: Passive temperature Pt1000 Ni1000 Ni1000TK5000 NTC1k8 NTC10k (10k2) NTC10k Pre (10k3) NTC20k Measuring Data: Measured Values: Temperature Measuring Range: 0...50°C [32...122°F] Measuring Current: Pt1000: <0.3 mA @ 0°C [32°F] Ni1000 (JCI): <5 mA @ 21°C [70°F] Ni1000TK5000: <0.3 mA @ 0°C [32°F] NTC1k8: <0.1 mA @ 25°C [77°F] NTC10k (10k2): <2 mA @ 25°C [77°F] NTC10k Pre (10k3): <2.7 mA @ 25°C [77°F] NTC20k: <0.5 mA @ 25°C [77°F] Accuracy Temperature Passive: Pt..: Class B, ±0.3°C @ 0°C [±0.5°F @ 32°F] Ni..: ±0.4°C @ 0°C [±0.7°F @ 32°F] NTC1k8: ±0.5°C @ 25°C [±0.9°F @ 77°F] NTC..: ±0.2°C @ 25°C [±0.35°F @ 77°F] Time Constant τ (63%) in the Room: Typical 360 s Safety Data: Protection Class IEC/EN: III, Protective Extra-Low Voltage (PELV) Degree of Protection IEC/EN: IP30 EU Conformity: CE Marking Certification IEC/EN: IEC/EN 60730-1 and IEC/EN 60730-2-9 Quality Standard: ISO 9001 Ambient Humidity: Max. 95% RH, non-condensing Ambient Temperature: 0...50°C [32...122°F] Storage Temperature: -20...60°C [-4...140°F] Materials: Housing: PC, white, RAL 9003 Safety Notes: This device is designed for use in stationary heating, ventilation, and air-conditioning systems and must not be used outside the specified field of application. Unauthorized modifications are prohibited. The product must not be used in relation to any equipment that may threaten humans, animals, or assets in case of a failure. Ensure all power is disconnected before installation. Only authorized specialists may carry out the installation. The device contains electrical and electronic components and must not be disposed of as household refuse. Remarks: Due to self-heating with 2-wire passive sensors, the supply wire current affects measurement accuracy. Ensure the supply current does not exceed the specified measuring current values. When using lengthy connecting cables, the cable resistance must be considered. The lower the impedance of the sensor used, the greater the effect of line resistance on measurement accuracy, generating an offset. Why You Should Buy: The Belimo 01RT-1L-0 Room Sensor is essential for achieving accurate and reliable temperature measurement in your HVAC system. With its high compatibility, precise measurement capabilities, and robust design, it is a valuable addition to any climate control system. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please contact us.
£18.30£12.81
-
Belimo 22ADP-184 Differential Air Pressure Sensor
Enhance the performance of your HVAC systems with the Belimo 22ADP-184 Differential Pressure Sensor. Designed for accurate monitoring of air filters, fans, and V-belts, this sensor is an essential tool for maintaining optimal airflow and pressure in your HVAC applications. With selectable ranges and outputs, robust construction, and an array of features, the 22ADP-184 ensures precise measurements and reliable operation. Click here for the technical data PDF The Belimo 22ADP-184 Differential Pressure Sensor has eight selectable ranges and outputs, including 0-5 V, 0-10 V, and 4-20 mA. This versatile sensor is suitable for air and other non-flammable, non-aggressive gases. Ideal for use in HVAC systems, it offers accurate differential pressure monitoring, ensuring efficient system performance and maintenance. Parts Included - Mounting Plate: A-22D-A10 - Duct Connector Kit: PVC tube 2 m, 2x duct connector (plastic) for 22ADP-.. Features and Benefits - Multi-Range Measurement: Select from eight different pressure ranges to suit your application needs. - Versatile Outputs: Choose between 0-5 V, 0-10 V, and 4-20 mA output signals. - High Burst Pressure: Withstands up to 40 kPa burst pressure. - LCD Display (Optional): Models with LCD display for easy reading of measured values. - Auto-Zero Calibration (Optional): Maintenance-free automated zero-point calibration. - Robust Enclosure: IP65 / NEMA 4X rated for dust and water protection. - Long-term Stability: ±2.5% FSO over four years. Electrical Data - Nominal Voltage: AC/DC 24 V - Voltage Range: AC 19-29 V / DC 15-35 V - Power Consumption: AC 4.3 VA / DC 2.3 W - Connection: Pluggable spring-loaded terminal block, max. 2.5 mm² - Cable Entry: Cable gland with strain relief, ø6-8 mm Functional Data - Sensor Technology: Piezo measuring element - Application: Air - Selectable Ranges: 0-2500 Pa, 0-2000 Pa, 0-1500 Pa, 0-1000 Pa, 0-500 Pa, 0-250 Pa, 0-100 Pa, -100-100 Pa - Output Signals: 0-5 V, 0-10 V, 4-20 mA (selectable with switch) - Response Time: Adjustable to 0.8 s or 4.0 s - Display: LCD, 29x35 mm with backlight Mechanical Data - Manual Override: Zero-point calibration button - Enclosure: Polycarbonate (PC), UV resistant - Protection Class (IEC/EN): IP65 - Protection Class (NEMA/UL): NEMA 4X - Certification: CE Marking, IEC/EN 60730-1, IEC/EN 60730-2-6, UL Approval (cULus acc. to UL60730-1A/-2-6, CAN/CSA E60730-1) - Ambient Temperature: -10 to 50°C - Storage Temperature: -10 to 50°C - Humidity: Max. 95% RH, non-condensing - Weight: Detailed in data sheet Optional Accessories - Metal Duct Connectors: Various sizes from 40 mm to 500 mm - Connection Adapter: Flex conduit, M20x1.5 - Airflow Volume Probes: Multiple sizes for round and rectangular ducts - Bluetooth Dongle: For use with Belimo Duct Sensor Assistant App Installation and Service This sensor can be installed and configured using the Belimo Duct Sensor Assistant App via a Bluetooth dongle. Ensure all power is disconnected before installation, and follow the installation instructions to maintain compliance with safety standards. Notes - The auto-zero calibration feature eliminates output signal drift, enhancing accuracy and reducing maintenance. - Manual zero-point calibration should be performed at regular intervals as specified in the technical data sheet. For more information and to explore our range of Belimo products, visit our website at https://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626.
£162.00£113.40
-
Belimo 22DT-14N Temperature Sensor
The Belimo 22DT-14N A duct/immersion temperature sensor is an active sensor designed to measure temperature precisely in duct applications. It is also suitable for pipe applications when combined with a stainless steel or brass thermowell. This sensor has a robust IP65/NEMA 4X-rated enclosure and ensures reliable performance in various environmental conditions. Click here for the technical data PDF Parts Included - Mounting Clip: A-22D-A11 (with screws and adhesive foil) Electrical Data - Nominal Voltage: DC 24 V - Nominal Voltage Range: DC 13.5...26.4 V - Power Consumption: 0.5 W - Electrical Connection: Pluggable spring-loaded terminal block, max. 2.5 mm² - Cable Entry: Cable gland with strain relief, ø6...8 mm Functional Data - Sensor Technology: Based on Pt1000 1/3 DIN - Application: Air, Water - Multirange: 8 measuring ranges selectable - Current Output: 1x 4...20 mA, max. resistance 500 Ω - Measured Values: Temperature Measuring Data - Measuring Range Settings: - S0: -50...50°C - S1: -10...120°C - S2: 0...50°C - S3: 0...250°C - S4: -15...35°C - S5: 0...100°C - S6: -20...80°C - S7: 0...160°C - Accuracy Temperature: ±0.5°C @ 21°C - Long-term Stability: ±0.04°C p.a. @ 21°C - Time Constant (τ 63%) in Water Pipe: - Typical 7 s with thermowell brass - Typical 9 s with thermowell stainless steel - Time Constant (τ 63%) in Air Duct: - Typical 46 s @ 3 m/s - Typical 210 s @ 0 m/s Safety Data - Protection Class IEC/EN: III, Protective Extra-Low Voltage (PELV) - Power Source UL: Class 2 Supply - Degree of Protection IEC/EN: IP65 - Degree of Protection NEMA/UL: NEMA 4X - Enclosure UL: Enclosure Type 4X - Certification IEC/EN: IEC/EN 60730-1 - UL Approval: cULus acc. to UL60730-1A/-2-9, CAN/CSA E60730-1/-2-9 - Type of Action: Type 1 - Rated Impulse Voltage Supply: 0.8 kV - Pollution Degree: 3 - Ambient Humidity: Max. 95% RH, non-condensing - Ambient Temperature: -35...50°C - Fluid Temperature: -50...160°C - Housing Surface Temperature: Max. 70°C Materials - Cable Gland: PA6, black - Housing: - Cover: PC, orange - Bottom: PC, orange - Seal: NBR70, black - UV resistant - Probe Material: V4A (1.4404) Accessories - Mounting Plate: S housing A-22D-A09 - Connection Adapter: Flex conduit, M20x1.5, for cable gland 1x 6 mm, Multipack 10 pcs. A-22G-A01.1 Optional Accessories (Air) - Mounting Flange for Sensor Probe: - 6 mm, up to max. 120°C, Plastic A-22D-A03 - 6 mm, up to max. 260°C, Brass A-22D-A05 Recommended Accessories (Water) - Thermowell Stainless Steel: - 50 mm, G 1/2", SW27 A-22P-A06 - 100 mm, G 1/2", SW27 A-22P-A08 - 150 mm, G 1/2", SW27 A-22P-A10 - 200 mm, G 1/2", SW27 A-22P-A12 - 300 mm, G 1/2", SW27 A-22P-A14 - 450 mm, G 1/2", SW27 A-22P-A16 - Thermowell Brass: - 50 mm, R 1/2", SW22 A-22P-A18 - 100 mm, R 1/2", SW22 A-22P-A20 - 150 mm, R 1/2", SW22 A-22P-A22 - 200 mm, R 1/2", SW22 A-22P-A24 - 300 mm, R 1/2", SW22 A-22P-A26 - 450 mm, R 1/2", SW22 A-22P-A28 - Compression Fitting: Stainless steel, G 1/4" (external thread) for 6 mm, with cutting ring A-22P-A45 - Cold Barrier: Plastic, L 50 mm, for thermowell A-22P-A.. A-22P-A51 - Syringe with Thermal Contact Fluid: A-22P-A44 Notes - Accuracy and Stability: Ensure accurate and stable performance with ±0.5°C temperature accuracy and ±0.04°C long-term stability. - Installation Tips: For optimal performance, avoid drafts and power surges during installation. Utilize two GND-wires to avoid measurement deviations. - Environmental Compatibility: Rated for use in harsh environments with an IP65/NEMA 4X enclosure. For more information and to explore our range of Belimo products, visit our website at http://ecospares.co.uk/collections/belimo. If you need any assistance, please get in touch with us on 01772 284 626. --- Would you like a list of keywords for digital marketing, guiding content creation, PPC campaigns, and social media hashtags to enhance product visibility? If yes, I can provide both long and short-tail keywords and relevant phrases.
£89.40£62.58
-
Belimo 22RTH-19-1 Room Sensor (CO₂ / Humidity / Temperature)
Introducing the Belimo 22RTH-19-1 Room Sensor, designed to measure indoor temperature, humidity, and CO₂ levels precisely. These sensors are perfect for integration with third-party controllers and feature MP-Bus communication and a 0...10 V output. Easily parametrised via NFC using the Belimo Assistant App, these sensors are a reliable addition to any HVAC system. Click here for the technical data PDF Electrical Data - Nominal Voltage: AC/DC 24 V - Nominal Voltage Range: AC 19.2...28.8 V / DC 19.2...28.8 V - Power Consumption (AC): 1 VA - Power Consumption (DC): 0.5 W - Electrical Connection: Spring loaded terminal 0.25...1.5 mm², 23-15 AWG, copper conductors only - Cable Type (USA and Canada): CL2 or higher - Cable Entry: Back, Top, Bottom Functional Data - Application: Air - Voltage Output: - 22RT-19-1: 1 x 0...5 V, 0...10 V, 2...10 V, min. resistance 5 kΩ - 22RTH-19-1: 2 x 0...5 V, 0...10 V, 2...10 V, min. resistance 5 kΩ - 22RTM-19-1: 3 x 0...5 V, 0...10 V, 2...10 V, min. resistance 5 kΩ - Output Signal Active Note: Output 0...5 V, 0...10 V (factory setting), 2...10 V selectable via NFC - Display: LED, used for CO₂ Traffic Light Function (TLF). Parametrisable and deactivatable via Belimo Assistant App. Measuring Data - Measured Values: - CO₂ - Relative Humidity - Dew Point - Temperature Specification CO₂ - Sensing Element Technology: Non-dispersive infrared (NDIR) dual channel - Measuring Range: Default setting: 0...2000 ppm - Accuracy: ±(50 ppm + 2% of measured value) - Long-Term Stability: ±20 ppm p.a. Specification Temperature - Measuring Range: 0...50°C [32...122°F] (default setting) - Accuracy Temperature Active: ±0.3°C @ 25°C [±0.5°F @ 77°F] - Long Term Stability: ±0.03°C p.a. @ 25°C [±0.05°F p.a. @ 77°F] Specification Humidity - Measuring Range: 0...100% RH (default setting) - Measuring Range Dew Point: -50...50°C [-60...120°F] (default setting) - Accuracy: ±2% between 0...90% RH @ 25°C - Long Term Stability: ±0.25% RH p.a. @ 25°C @ 50% RH Safety Data - Protection Class (IEC/EN): III, Safety Extra-Low Voltage (SELV) - Power Source (UL): Class 2 Supply - Degree of Protection (IEC/EN): IP30 - EU Conformity: CE Marking - Quality Standard: ISO 9001 - UL Approval: cULus according to UL60730-1, CAN/CSA E60730-1 - Type of Action: Type 1 - Rated Impulse Voltage Supply: 0.5 kV - Pollution Degree: 2 - Ambient Humidity Max: 95% RH, non-condensing - Ambient Temperature: 0...50°C [32...122°F] - Storage Temperature: -40...70°C [-40...160°F] Materials - Housing: PC, white, RAL 9003 - UL94V-0 Parts Included - Screws Accessories - Tools Description: - Belimo Assistant App: Smartphone app for easy commissioning, parametrising, and maintenance - Converter Bluetooth / NFC: ZIP-BT-NFC Notes - General Remarks: The sensor's accuracy can be influenced by the thermal characteristics of the wall on which it is mounted. It is designed for use in stationary heating, ventilation, and air-conditioning systems. - Application Notice for Humidity Sensors: The humidity sensor is highly sensitive and should not be exposed to aggressive substances like chlorine or ammonia, which can affect accuracy. Why You Should Buy Choosing Belimo's 22RT-19-1 series ensures you are getting top-notch accuracy and reliability for your HVAC systems. With advanced features like dual channel CO₂ sensing and NFC parametrisation, these sensors are designed for optimal performance and ease of use. Their robust design and adherence to strict safety standards make them ideal for commercial applications, including hospitals and office buildings. Enhance your indoor air quality monitoring with Belimo and ensure a comfortable, safe environment for everyone. For more information and to explore our range of Belimo products, visit our website at ecospares.co.uk/collections/belimo. If you need any assistance, please contact us on 01772 284 626.
£110.00£77.00
You have seen 48 out of 227 products